Ford Edge Air Bleed Housing Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(509)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(509)

Air Bleed Housing Assembly Replacement Service

How much does a Air Bleed Housing Assembly Replacement cost?

On average, the cost for a Ford Edge Air Bleed Housing Assembly Replacement is $419 with $324 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2010 Ford EdgeV6-3.5LService typeAir Bleed Housing Assembly ReplacementEstimate$762.45Shop/Dealer Price$934.32 - $1427.41
2007 Ford EdgeV6-3.5LService typeAir Bleed Housing Assembly ReplacementEstimate$751.17Shop/Dealer Price$925.23 - $1424.88
Show example Ford Edge Air Bleed Housing Assembly Replacement prices

What is the Air Bleed Housing Assembly all about?

Coolant is essential to engine operation throughout the year. It carries away heat that would otherwise kill the engine during operation, but it also protects against freezing during winter – normal water can freeze solid inside an engine, causing immense damage from expansion. However, coolant degrades over time and must be changed. Changing the coolant allows air into the system, which must be removed in order for the engine to operate correctly. Air in the coolant lines can cause many problems, including overheating and severe engine damage.

The air bleed housing assembly, or air bleeder housing assembly if you prefer, is a simple setup generally found near the back of the engine that allows you to combat this problem. It is usually the highest point on the cooling system. It’s nothing more than a small housing with a bleeder nut attached. By opening the valve while the engine is running after a coolant change, air escapes out of the system and prevents overheating.

Keep in mind:

  • The air bleed housing assembly is not inspected during normal maintenance, but should be inspected during any coolant system service.
  • The air bleed housing assembly is made of metal, and running straight water in your system can cause problems including rust and corrosion that will require the assembly to be replaced.

How it's done:

  • The air bleed housing assembly is verified to see if it needs to be replaced
  • The defective air bleed housing assembly is removed
  • The new air bleed housing assembly is installed
  • The air bleed housing assembly is tested for operation and leaks
  • The vehicle is tested to ensure proper operation of the air bleed housing assembly

Our recommendation:

The air bleed housing assembly on your car’s coolant system is crucial after a coolant system change. If air is not removed from the lines, the engine could overheat from an airlock, causing damage as serious as a cracked block in extreme situations. Have the air bleeder housing assembly replaced by one of our expert mechanics if it is corroded or inoperable.

What common symptoms indicate you may need to replace the Air Bleed Housing Assembly?

  • Bleeder valve will not open
  • Bleeder valve or assembly is damaged in some way that compromises operation
  • The housing is leaking coolant.

How important is this service?

While the air bleed housing assembly isn’t critical to normal operation, it’s a crucial part of your engine coolant system. If the bleeder valve is damaged, or the assembly is corroded, we recommend replacing it as soon as possible. It will not prevent you from driving your car, but it can cause serious issues after a coolant change.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(509)

Rating Summary
482
15
3
3
6
482
15
3
3
6

Irven

11 years of experience
60 reviews
Irven
11 years of experience
Ford Edge V6-3.5L - Clunking or knocking noise from wheels - Baltimore, Maryland
He showed up on time and was able to diagnose the situation with ease and within a very short period of time. What I liked most was he explained the issue in a language that I could understand.

Jason

17 years of experience
429 reviews
Jason
17 years of experience
Ford Edge V6-3.5L - Oil Change - Livermore, California
Excellent

Yoel

9 years of experience
212 reviews
Yoel
9 years of experience
Ford Edge V6-3.5L - Check Engine Light is on - Philadelphia, Pennsylvania
Yoel was on time and courteous, very thorough inspection and was able to determine that just a reset of my computer was all that was needed . He took it out for test drive then had me take it out with him in car, had me push the car, acceleration, hard stops, the car ran great. I scheduled him for the next day to replace my front brake pads

Scott

34 years of experience
551 reviews
Scott
34 years of experience
Ford Edge V6-3.5L - Cooling/Radiator Fan Motor - Denver, Colorado
Scott did an excellent job and in a timely manner. Fixed my problem very happy with his service

Excellent Rating

(509)

Rating Summary
482
15
3
3
6
482
15
3
3
6
Number of Ford Edge services completed
5599+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1700+
experts on our platform

Recent articles & questions

The Guide to Right-of-Way Laws in Mississippi
Right-of-way Right-of-way laws in Mississippi are comprised of important rules that define who is going to be able to proceed through intersections and other areas where vehicles and pedestrians come into contact, and who will have to wait. These rules...
How to Become a Certified Mobile Vehicle Inspector (State Car Inspector Certified) in South Carolina
Automotive technician jobs include mobile vehicle inspectors. Learn how to do car checks in South Carolina through the Universal Technical Institute.
P0590 OBD-II Trouble Code: Cruise Control Multi-Function Input “B” Circuit Stuck
P0590 means an electrical issue with the cruise control multi-function input B circuit, commonly caused by a malfunctioning cruise control switch.

no power to fuel sending unit in tank

The fuel pump relay in the engine relay box powers the fuel pump to run, but the fuel pump relay is turned on and off by the engine control module on pin 19 brn/wt wire grounding the circuit. You will...

Tried to reset key fob didn't work now immobiliser activated.

The Immobilizer System indicator light comes on for a few seconds, then it goes out when you turn the ignition switch to the 'ON' position. The Immobilizer System light will blink if it cannot recognize the key coding. Try reprogramming...

A/C control messed up.

The system is controlled electronically and consequently the controller is a possibility. But, to condemn the controller, there is a long sequence of diagnostic steps (from the Factory Service Manual) that have to be performed. Typically, in diagnostics of this...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com