Ford EcoSport Water Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(4)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(4)

Water Pump Replacement Service

How much does a Water Pump Replacement cost?

On average, the cost for a Ford EcoSport Water Pump Replacement is $548 with $128 for parts and $420 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2018 Ford EcoSportL4-2.0LService typeWater Pump ReplacementEstimate$720.82Shop/Dealer Price$795.58 - $995.54
2018 Ford EcoSportL3-1.0L TurboService typeWater Pump ReplacementEstimate$700.91Shop/Dealer Price$772.15 - $973.48
Show example Ford EcoSport Water Pump Replacement prices

What is a water pump and how does it work?

The water pump is a belt or chain-driven engine accessory bolted to the engine above the crankshaft pulley. The pump housing has an impeller that circulates engine coolant through the cooling system passageways in the engine block and cylinder head, on to the radiator, where the coolant temperature is reduced. . The lower temperature coolant then flows back to the water inlet on the engine and the water pump continues the cycle.

When to consider replacing the water pump:

  • Coolant leaks or overheating. The water pump impeller shaft is supported by a bearing. Eventually, the bearing or seal can wear and leak or damage the impeller. Many water pumps have weep holes near the pump bearing. If you see significant leakage from that weep hole, it is time to replace the pump.
  • Bearing roughness or noise. If the water pump shaft does not turn smoothly or the pump is noisy, the bearing is excessively worn. Pump replacement will be necessary.
  • Timing belt replacement. In engines where the water pump is driven by the timing belt, it is a good idea to replace the water pump at the same time the timing belt is replaced. The extensive work explains why it is always recommended to replace the water pump whenever the mechanic already has these components removed for regularly scheduled timing belt replacement.

How do mechanics replace the water pump?

  • The water pump is usually bolted to the front of the engine. The replacement procedure will vary depending on whether the pump is driven by the timing belt, the serpentine belt, or chain.
  • On a cold engine, the engine coolant is drained to a level below the water pump.
  • Components that require removing to access the water pump are removed, including the belt or chain that directly drive the pump.
  • The bolts holding the pump to the engine are removed and the pump is pulled out.
  • The gasket surface must be cleaned and the pump mounting surface inspected. A new gasket, rubber seal, or RTV sealant, as required, is installed and then the new pump. The bolts are torqued in sequence using a calibrated inch pound torque wrench.
  • For applications where the water pump is driven by the timing belt, the timing belt must be removed. Typically, this requires removal of the crankshaft pulley, timing belt covers, and timing belt tensioner. Once the new pump is installed, new coolant is added back while bleeding the cooling system of any air. The engine is then run and brought to normal operating temperature to check for leaks and ensure normal operating temperature.

Is it safe to drive with a water pump problem?

No. Should the water pump only leak a little bit, you can drive the car. However, a small leak could suddenly enlarge or the pump bearing might unexpectedly seize. Either circumstance would likely cause engine overheating. If a defective water pump causes the overheating, it is not safe to drive because of the damage to the engine.

When replacing the water pump keep in mind:

  • It is best to install a new cooling system thermostat when you install a new water pump, especially if the thermostat is old or original.
  • Completely flushing the cooling system is a good idea when you replace the water pump. Flushing can be done before or after pump replacement.
  • The rest of the cooling system should be inspected too — particularly rubber hoses, which have a limited lifetime.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0

RYAN

6 years of experience
103 reviews
RYAN
6 years of experience
Ford EcoSport L3-1.0L Turbo - Thermostat - San Antonio, Texas
Ryan was prompt and professional.

Attila

20 years of experience
1104 reviews
Attila
20 years of experience
Ford EcoSport L3-1.0L Turbo - Oil Change - Bloomfield, New Jersey
Attila was fantastic! Professional and efficient!

Richard

36 years of experience
104 reviews
Richard
36 years of experience
Ford EcoSport L3-1.0L Turbo - Oil Change - Tampa, Florida
It was fantastic!! Love the quick service and conveniece of them coming to you!!! Will definitely remember Richard for any future needs with my mechanic

Derrick

12 years of experience
184 reviews
Derrick
12 years of experience
Ford EcoSport L4-2.0L - Battery - Oakland, California
It was the best experience that I have in the Bay Area. He was professional, friendly and knowledgeable in his craft, and would highly recommend him to anyone that needs their car fixed on the spot.

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0
Number of Ford EcoSport services completed
44+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1800+
experts on our platform

Recent articles & questions

P0161 OBD-II Trouble Code: HO2S Heater Circuit Malfunction (Bank 2 Sensor 2)
P0161 trouble code definition The P0161 trouble code identifies that there is a problem with the heater control circuit in the bank...
What is a Torque Strut Mount all about?
Could a broken strut mount cause engine noise under the hood?
How to Remove Bugs From Your Car
Regular, Regular, everyday driving exposes your vehicle to bugs (https://www.yourmechanic.com/article/how-to-remove-bugs-from-your-car-by-jason-unrau) and tar which get splattered all over your windshield, paint job, headlights, and grille. Parking your vehicle on your driveway or on the picturesque street under a shady tree can...

How do I customize the Remote Start Auto Heat Seat settings?

The Remote Start Auto Heat Seats setting allows you to choose whether or not the heated seats turn on when using the remote start feature on cold days. Adjusting the settings takes only a few steps: 1. Turn on the...

2001 Oldsmobile Aurora window problems

Hello. Thank you for writing in. The systems that are being effected have one thing in common, which is they are all powered through the main drivers switch (https://www.yourmechanic.com/services/window-switch-is-not-working-inspection). These wires are all then sent through the elbow in the...

I have a vw and the rpm jumps up and down as if I'm pressing the gas padel

If the engine is not idling correct then you most likely have codes stored in the computer for the problem and would need to have the systems scanned to get the codes. You may have a problem with the throttle...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com