Ford E-250 Econoline Club Wagon Car Thermostat Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(241)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(241)

Car Thermostat Replacement Service

How much does a Car Thermostat Replacement cost?

On average, the cost for a Ford E-250 Econoline Club Wagon Car Thermostat Replacement is $160 with $65 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1978 Ford E-250 Econoline Club WagonL6-4.9LService typeCar Thermostat ReplacementEstimate$354.59Shop/Dealer Price$418.86 - $582.44
1982 Ford E-250 Econoline Club WagonV8-6.6LService typeCar Thermostat ReplacementEstimate$328.47Shop/Dealer Price$392.74 - $556.24
1990 Ford E-250 Econoline Club WagonV8-7.3L DieselService typeCar Thermostat ReplacementEstimate$282.11Shop/Dealer Price$334.78 - $463.52
1977 Ford E-250 Econoline Club WagonV8-5.8LService typeCar Thermostat ReplacementEstimate$435.93Shop/Dealer Price$527.03 - $771.11
1989 Ford E-250 Econoline Club WagonL6-4.9LService typeCar Thermostat ReplacementEstimate$254.21Shop/Dealer Price$299.93 - $407.75
1990 Ford E-250 Econoline Club WagonV8-5.8LService typeCar Thermostat ReplacementEstimate$255.25Shop/Dealer Price$301.21 - $409.80
1984 Ford E-250 Econoline Club WagonV8-6.9L DieselService typeCar Thermostat ReplacementEstimate$425.65Shop/Dealer Price$512.41 - $743.79
1984 Ford E-250 Econoline Club WagonV8-5.8LService typeCar Thermostat ReplacementEstimate$430.75Shop/Dealer Price$519.27 - $754.84
Show example Ford E-250 Econoline Club Wagon Car Thermostat Replacement prices

What is an engine cooling system thermostat and how does it work?

The car's engine cooling system thermostat is a small valve within a cooling system passageway that opens and closes in response to the temperature of the circulating engine coolant. When your car is first started and the coolant is cold, the valve in the thermostat will be in the closed position, circulating the coolant flow only within the engine instead of flowing to the radiator, which allows the engine to warm up fast, promoting fuel efficiency, low emissions, and reduced engine deposits. Once the engine coolant reaches the design temperature, usually around 195 degrees, the valve will open and close as you drive in order to maintain a coolant temperature typically between 195 to 225 degrees Fahrenheit.

Thermostat

When to consider replacing the engine cooling system thermostat:

  • Engine overheats. A thermostat with the valve stuck closed is a common cause of engine overheating. However, since there are other causes of overheating, a mechanic will thoroughly inspect the cooling system prior to condemning the thermostat. Since it is usually not known how badly the engine overheated, the mechanic will also try to determine if there is evidence that the cylinder head gasket was blown. If so, it would be repaired prior to replacing the thermostat.
  • Temperature gauge reads too low or too high. Thermostats can get sticky, causing the engine temperature to stray from the optimal range. Your dash-mounted temperature gauge will notify you of this malfunction.
  • Cooling system repairs. All thermostats eventually fail. Therefore, if the cooling system is already open for major repairs, such as water pump or radiator replacement, it is recommended to install a new thermostat simply as insurance against future breakdown.

How do mechanics replace the engine cooling system thermostat?

  • Once the engine is completely cold, the radiator cap is loosened and enough coolant is drained from the radiator so the coolant level is below the thermostat housing.
  • The thermostat housing is removed and the thermostat and gasket are extracted. Note that some cars have more than one cooling system thermostat and both might need replacement.
  • All mounting surfaces on the thermostat housing are cleaned of old gasket material. A new gasket is applied and the thermostat is re-installed in the correct orientation and with the temperature sensing cylinder facing downward towards the engine.
  • The thermostat housing bolts are tightened to original equipment manufacturer (OEM) specifications using a calibrated inch-pound torque wrench.
  • The cooling system is refilled with the appropriate coolant type and the system is fully bled of all air.
  • The car engine is run until the normal operating temperature is reached, and while taking precautions with the hot coolant, the coolant level is rechecked while confirming there is flow through the radiator — either visually or with an infrared temperature gun. This will confirm the thermostat is open. Finally, the engine is checked for leaks.

Is it safe to drive with an engine cooling system thermostat problem?

No. If it has been determined that there is a thermostat problem, it should be repaired right away. Failure to do so can cause substantial and costly damage to the engine.

When replacing the engine cooling system thermostat keep in mind:

  • Engine overheating due to causes other than a faulty thermostat, will themselves damage a thermostat. Therefore, always replace the thermostat if the engine overheats, even if the thermostat was not the initial cause of the overheating.
  • The thermostat should be replaced anytime you have major work done on the coolant system. It is convenient and costs little during such repairs and insurance against future breakdown.
  • OEM thermostats are the best ones to use and you can request your mechanic to install only the OEM thermostat. Dealer supplied, OEM thermostats are sometimes more costly but are generally higher quality and specifically engineered for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(241)

Rating Summary
230
6
1
1
3
230
6
1
1
3

Robert

23 years of experience
253 reviews
Robert
23 years of experience
Ford E-250 Econoline Club Wagon V8-5.8L - Electric Problems Inspection - Crosby, Texas
Very knowledgeable. Confirmed what I felt was the problem. I was a bit disappointed that the repair could not be accomplished at my home and suggested I take truck to electrical repair shop.

Henry

34 years of experience
170 reviews
Henry
34 years of experience
Ford E-250 Econoline Club Wagon L6-4.9L - Air Shocks Replacement (Front) - Clayton, New Jersey
Henry always gets right to work. he does a great job!

Chris

16 years of experience
122 reviews
Chris
16 years of experience
Ford Mustang V6-3.8L - Thermostat - Valley Village, California
Chris was great. Unfortunately he came in the middle of another Yourmechanic's unfinished job which we found out was re-quoted incorrectly, so Chris was unable to complete it. This was not his fault at all and he was great, though the car still isn't fixed.i would recommend Chris, but I'm not sure I'm sold on Yourmechanic.com just yet.

Patrick

15 years of experience
406 reviews
Patrick
15 years of experience
Ford Focus L4-2.0L - Thermostat - Chesterfield, Virginia
Excellent service. Would definitely recommend.

Excellent Rating

(241)

Rating Summary
230
6
1
1
3
230
6
1
1
3
Number of Ford Car Thermostat Replacement services completed
2651+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1700+
experts on our platform

Recent articles & questions

How to Buy a Good Quality Tire Air Pump
Owning Owning a car means an air pump is a great investment. It’s essential to keep your tires at the proper air pressure in order to protect them, your vehicle, and yourself. An air pump lets you do so without...
How Long Does a Horn Relay Last?
Having Having a fully functional horn is an essential part of staying safe while driving. The horn on your vehicle will allow you to alert other drivers of your presence and can be used to prevent accidents in some instances....
How to Replace a Hatch Lock Cylinder
Replacing a hatch lock cylinder requires careful attention and only a few tools. You can complete the task in about an hour.

How do you use the heated side view mirrors?

If your car is equipped with heated side view mirrors, you have a convenient way to clear away ice, snow and fog from your mirrors. Don’t worry, using your heated mirrors is actually very simple. Just push the rear Defrost...

Engine shaking and strange noise from the engine bay, also weird rpm at start up

Hello there, a few possible items can cause a similar noise to what you describe. Most likely it is an engine misfire, fuel pump problem (https://www.yourmechanic.com/article/how-can-you-tell-that-your-fuel-pump-isn-t-working), worn out fuel filter (https://www.yourmechanic.com/article/what-causes-an-oil-filter-to-get-dirty), dirty idle air valve (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-idle-control-valve) (which you may be...

My car jerks when decelerating from what seems to be 4th gear to 3rd.

You need to have the codes scanned by a professional with a scan tool for the transmission computer. The codes may give you an indication if the sensor is not performing correctly. If it is not a sensor malfunctioning (like...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com