Ford E-150 Econoline Club Wagon Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(12)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(12)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Ford E-150 Econoline Club Wagon Power Steering Pressure Hose Replacement is $205 with $65 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1998 Ford E-150 Econoline Club WagonV8-5.4LService typePower Steering Pressure Hose ReplacementEstimate$1094.10Shop/Dealer Price$1149.70 - $1266.26
1992 Ford E-150 Econoline Club WagonL6-4.9LService typePower Steering Pressure Hose ReplacementEstimate$419.35Shop/Dealer Price$489.52 - $695.92
2002 Ford E-150 Econoline Club WagonV8-4.6LService typePower Steering Pressure Hose ReplacementEstimate$326.57Shop/Dealer Price$363.18 - $467.58
1992 Ford E-150 Econoline Club WagonV8-5.0LService typePower Steering Pressure Hose ReplacementEstimate$254.45Shop/Dealer Price$283.42 - $366.16
1994 Ford E-150 Econoline Club WagonL6-4.9LService typePower Steering Pressure Hose ReplacementEstimate$316.73Shop/Dealer Price$362.75 - $493.30
1996 Ford E-150 Econoline Club WagonL6-4.9LService typePower Steering Pressure Hose ReplacementEstimate$1075.88Shop/Dealer Price$1130.95 - $1268.30
1991 Ford E-150 Econoline Club WagonV8-5.0LService typePower Steering Pressure Hose ReplacementEstimate$364.37Shop/Dealer Price$420.84 - $586.03
1999 Ford E-150 Econoline Club WagonV6-4.2LService typePower Steering Pressure Hose ReplacementEstimate$1041.92Shop/Dealer Price$1087.63 - $1198.85
Show example Ford E-150 Econoline Club Wagon Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(12)

Rating Summary
10
1
0
1
0
10
1
0
1
0

Ben

42 years of experience
1589 reviews
Ben
42 years of experience
Ford E-150 Econoline Club Wagon V8-5.4L - Service Light is on - Spring, Texas
More capable than anyone I have met, he was above and beyond what a professional looks and acts. Far exceeded my expectations, polite, quick, efficient and easy to talk through problems with. I look forward to working with Mr. Smith in the future!

Chris

21 years of experience
448 reviews
Chris
21 years of experience
Ford E-150 Econoline Club Wagon V8-5.0L - Car is not starting - Portland, Oregon
Chris was friendly, and knew what he was doing! 10/10 what a homie.

Robert

21 years of experience
1307 reviews
Robert
21 years of experience
Ford E-150 Econoline Club Wagon V8-4.6L - Ignition Switch - Denver, Colorado
Great guy! Thanks so much for the quality service.

Jay

24 years of experience
262 reviews
Jay
24 years of experience
Ford E-150 Econoline Club Wagon V8-5.8L - Engine is misfiring Inspection - Chicago, Illinois
Professional appearance and attention, comfortable to talk to, listens to customer's comments on the problems, explains what the issues could be.

Excellent Rating

(12)

Rating Summary
10
1
0
1
0
10
1
0
1
0
Number of Ford E-150 Econoline Club Wagon services completed
132+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1800+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Brake Drum
If your car has drum brakes and you experience an unusual brake pedal feel, abnormal noises, or loose parking brake, you may have to replace a drum.
Why Do Cars Have Different Oil Change Intervals?
Car oil change intervals depend on the make, model, and year of the car. The correct type of oil and how the vehicle is used makes a difference too.
P0277 OBD-II Trouble Code: Cylinder 6 Injector Circuit High
P0277 P0277 code definition This code means that there is an injector circuit malfunction affecting cylinder six. What the P0277 code means When this code appears, the ECM (engine control module) has reported that either the resistance of voltage for...

right side steering pulls to the right

From what you described about your 2000 Ford Focus, you may have a bad tie rod end (https://www.yourmechanic.com/services/tie-rod-end-replacement) or a bad tire (https://www.yourmechanic.com/article/how-to-check-if-your-tires-are-in-good-condition). Have the front end inspected and checked for damage. A vibration is most likely a tire or...

AC compressor will not engage

Hello there, thank you for asking about your 1997 Oldsmobile LSS. If the relay and fuses that power the AC clutch are in good order, the problem may be in the side of the circuit where you command the AC...

How long should it take to replace an AC compressor and condenser in my Saturn Astra?

Hi there. If you'd like to receive an estimate, which would include the estimated labor hours along with replacement parts and supplies, you can click this link (https://www.yourmechanic.com/services/ac-condenser-replacement). Generally speaking, the job itself takes about 3 to 5 hours to...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com