Ford Crown Victoria Wheel Bearings Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(200)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(200)

Wheel Bearings Replacement Service

How much does a Wheel Bearings Replacement cost?

On average, the cost for a Ford Crown Victoria Wheel Bearings Replacement is $155 with $15 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1995 Ford Crown VictoriaV8-4.6LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$300.16Shop/Dealer Price$340.05 - $451.62
1992 Ford Crown VictoriaV8-4.6LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$296.69Shop/Dealer Price$318.86 - $379.20
1997 Ford Crown VictoriaV8-4.6LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$286.75Shop/Dealer Price$323.80 - $430.76
1994 Ford Crown VictoriaV8-4.6LService typeWheel Bearings - Driver Side Front ReplacementEstimate$176.25Shop/Dealer Price$185.67 - $209.76
1996 Ford Crown VictoriaV8-4.6LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$296.69Shop/Dealer Price$321.11 - $383.13
1996 Ford Crown VictoriaV8-4.6LService typeWheel Bearings - Driver Side Rear ReplacementEstimate$296.69Shop/Dealer Price$319.11 - $379.63
2004 Ford Crown VictoriaV8-4.6LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$540.41Shop/Dealer Price$640.89 - $938.11
2011 Ford Crown VictoriaV8-4.6LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$601.25Shop/Dealer Price$716.92 - $1059.76
Show example Ford Crown Victoria Wheel Bearings Replacement prices

What are wheel bearings and how do they work?

A wheel bearing assembly consists of rolling elements, such as hardened steel ball bearings or roller bearings, that roll on and around hardened steel bearing races. The wheel bearings support the front and rear axle, and all the weight of your car. Wheel bearings are made with a high-precision technique using extremely hard steel in order to withstand all the normal impacts that occur to the wheel and tire assembly as you drive along the road.

When to replace wheel bearings?

  • Growling or grinding noise from a wheel. Failed or failing wheel bearings make a very characteristic growling noise which will grow louder as the bearing wear progresses. If you believe the wheel bearing noise is coming from one side of the car, you can self-diagnosis your wheel bearing as you drive the car by loading and unloading vehicle weight You can do this by “swerving” from side-to-side. For example, if the noise markedly increases when you swerve to left, which shifts the vehicle’s weight to the right, then it often indicates the wheel bearing on the right is failing.

  • Axial or radial play in the wheel or wheel hub. Should the wheel hub move up and down or in and out, the bearing may be worn.

  • Vibration in the steering wheel or vehicle body and/or wandering. Vibration and lack of directional stability could be consequences of loose or worn out wheel bearings.

  • Tire and wheel assembly does not turn smoothly. With the wheel jacked up, and the car not in gear, the wheel should rotate smoothly. Rough or inconsistent movement, which is often accompanied by noise, can signify damaged bearings. Be sure the brakes are not dragging as you perform this check.

How do mechanics replace wheel bearings?

The complexity of wheel bearing replacement varies greatly depending on the vehicle make, model, year, the wheel position (front versus rear), and the drive type (AWD versus FWD):

  • On vehicles with unitized wheel bearing/hub assemblies, the brake rotor and caliper are removed.
  • The large axle nut is removed, the axle is pushed back through the center of the unitized hub assembly, and three (or more) bolts holding the hub assembly to the steering knuckle are removed.
  • The hub assembly is then removed from the knuckle. On installation of the new hub assembly to the knuckle, the bolts are torqued to the factory specification. In many cases, it is required to discard the old axle nut and replace with a new one. Special attention must be given to tightening the axle nut to the exact factory specification because over or under-tightening can damage the newly installed bearing. All YourMechanic professionals use calibrated torque wrenches on these critical fasteners.
  • Finally, the brake rotor and brake caliper are re-attached, the wheel installed and the car is road tested.
  • On vehicles where the wheel bearing is pressed into a cavity within the steering knuckle, the steering knuckle must be removed from the vehicle in order to press out the old bearing and press in the new bearing.
  • On some vehicles, the wheel bearing is pressed onto an axle shaft and thus the axle must be extracted from the axle carrier. This will apply to certain trucks.

Is it safe to drive with a wheel bearing problem?

No. Wheel bearing failure is usually gradual, although in some cases it starts immediately after the dramatic impact of the wheel and tire assembly with a deep pothole. Wheel bearings can sometimes make noise for quite some time before you experience a catastrophic failure that would result in complete separation of the wheel and tire assembly from the axle. Generally, the risk of sudden failure increases with the noise level. But strictly speaking, once the bearing has started to fail it is impossible to predict exactly when it will fail completely. So it should not continue to be driven. Were a failing bearing to seize or break while you are moving, you could experience loss of control of the vehicle. Once you receive a conclusive diagnostic that a wheel bearing has failed, replace the bearing promptly.

When replacing wheel bearings, keep in mind:

  • If the car has a substantial number of miles on the failed bearing (100,000 miles or more), it is a good idea to replace both bearings (driver and passenger) on the axle at the same time.
  • Wheel bearing noise can be confused with tire noise from defective tires. In difficult cases, a mechanic will apply remote wireless microphones at all 4 wheel positions, and then drive the car while listening to a remote receiver, switching between wheel positions to pinpoint the location of the failed bearing.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(200)

Rating Summary
186
9
2
1
2
186
9
2
1
2

Daniel

8 years of experience
18 reviews
Daniel
8 years of experience
Crown Victoria 2008 - Brakes, Steering and Suspension Inspection - Fort Lauderdale, FL
Great mechanic highly recommend him

James

21 years of experience
49 reviews
James
21 years of experience
Crown Victoria 2004 - Oil/Fluid Leak - Douglasville, GA
Good service

Ronnie

28 years of experience
65 reviews
Ronnie
28 years of experience
Crown Victoria 1993 - Tune-up - Franklin, TN
No problem at all. Everything went fine. Ronnie is a great mechanic.

Peter

22 years of experience
479 reviews
Peter
22 years of experience
Crown Victoria 2003 - Power Steering Fluid Service - Chatsworth, CA
Peter is patient, professional, and polite. He knows his stuff.

Excellent Rating

(200)

Rating Summary
186
9
2
1
2
186
9
2
1
2
Number of Ford Crown Victoria services completed
2200+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1800+
experts on our platform

Recent articles & questions

P0936 OBD-II Trouble Code: Hydraulic Pressure Sensor Circuit Intermittent
P0936 means there is an issue with a circuit in the hydraulic pressure sensor, most likely due to damaged electrical components.
P0243 OBD-II Trouble Code: Turbocharger Wastegate Solenoid A Malfunction
P0243 code definition Turbocharger Wastegate Solenoid A Malfunction What the P0243 code means P0243 is a generic OBD-II code indicating that the...
Disabled Driver Laws and Permits in South Carolina
In In South Carolina, people who have disabilities are entitled to certain privileges when it comes to parking. These privileges override those of other motorists, and are mandated by law. Summary of South Carolina disabled driver laws In South Carolina,...

Fuel vacuum line

We would need to know the exact code your vehicle is setting. The code should have a complete pinpoint test done to locate the problem. Once the tests are done, then the system can be fixed. Driving the vehicle with...

Replace Radiator - do I need to purge/recharge the AC system?

Hello. When replacing the radiator, you do have to mess with the condenser a little bit, but you do not need to disconnect it or remove it. The first step when it comes to the condenser is to remove the...

DSG transmission slipping gears 2012 VW GTI

Hello - I think you're getting the run-around. These DSG transmissions (https://www.yourmechanic.com/question/p2711-unexpected-mechanical-gear-disengagement-by-stefan-b) are quite sophisticated, and have very detailed on-board diagnostic capability. Check with another VW service center, which will use a VAG-COM diagnostic tool to check for problem codes...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com