Ford Bronco Brake Drum Replacement Costs

Estimate price near me

Service Location

Customer Ratings

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

See availability

Customer Ratings

Brake Drum Replacement Service

How much does a Brake Drum Replacement cost?

On average, the cost for a Ford Bronco Brake Drum Replacement is $396 with $168 for parts and $228 for labor. Prices may vary depending on your location.

Car	Service	Estimate	Shop/Dealer Price
1985 Ford BroncoL6-4.9L	Service typeBrake Drum Replacement	Estimate$1144.70	Shop/Dealer Price$1348.39 - $1860.45
1987 Ford BroncoL6-4.9L	Service typeBrake Drum Replacement	Estimate$1028.62	Shop/Dealer Price$1225.37 - $1716.42
1972 Ford BroncoV8-5.0L	Service typeBrake Drum Replacement	Estimate$827.00	Shop/Dealer Price$1000.79 - $1468.09
1996 Ford BroncoV8-5.8L	Service typeBrake Drum Replacement	Estimate$904.33	Shop/Dealer Price$1063.03 - $1428.92
1995 Ford BroncoV8-5.0L	Service typeBrake Drum Replacement	Estimate$904.33	Shop/Dealer Price$1063.22 - $1429.25
1983 Ford BroncoV8-5.8L	Service typeBrake Drum Replacement	Estimate$998.02	Shop/Dealer Price$1187.11 - $1655.21
1974 Ford BroncoV8-5.0L	Service typeBrake Drum Replacement	Estimate$839.00	Shop/Dealer Price$1012.47 - $1479.52
1984 Ford BroncoL6-4.9L	Service typeBrake Drum Replacement	Estimate$1078.70	Shop/Dealer Price$1283.50 - $1796.39

Show example Ford Bronco Brake Drum Replacement prices

What are brake drums and how do they work?

A brake drum is a heavy, cast iron brake system part that looks like a shallow, several inches-high cylinder about 9 to 12 inches in diameter. The brake drum has a precisely machined surface all around the interior circumference, that the brake shoes make contact with when you apply the brakes, transmitting hydraulic pressure through the wheel cylinder. This forces the brake shoes outward against the interior of the brake drum, resulting in the friction that causes the car to slow. The brake drum is mounted over, and fully encloses, all of the rear brake components such as the wheel cylinder, springs and clips, brake shoes, and parking brake mechanism. The drum is commonly held to the wheel hub by the wheel and the lug nuts, but some configurations combine the drum with the wheel hub as one unit. Nowadays, a drum brake type system is only installed on the rear axle, if used at all, as 4 wheel disc type systems have become more common.

When to consider replacing brake drums:

Reduced braking effectiveness. If the brake drum is unevenly worn, scored or cracked, it will increase stopping distances. A cracked drum must be replaced outright but a worn drum can be restored on a brake lathe so long as enough metal material remains.
Pulsating brakes, pulling to one side, vibration or noise. If a brake drum is warped, is unevenly worn, or perhaps the brake shoes have worn down completely — creating metal-to-metal contact — you might detect pedal pulsation, the vehicle may pull to one side, or you might feel a vibration or hear a noise when you apply the brakes. The brake system will have to be inspected to pinpoint the exact problem.
Brake shoe replacement. Anytime the brake shoes are replaced, the drum must either be resurfaced or replaced outright. Installing new brake shoes on a used, unresurfaced drum will lead to poor results.
Loss of parking brake function. The parking brake locks the brake shoes against the brake drum. If the brake drum is cracked, the parking brake lever will pull up excessively and the car may still be able to roll. However, a more common circumstance is parking brake maladjustment or seizure of parking brake components. Repair of those problems will often require removal of the brake drum.

How do mechanics replace brake drums?

There are two options when it comes to brake drum service: outright replacement or resurfacing. In some cases, it is cheaper to replace the drum rather than refurbish it. In both cases though, the removal and installation procedure for the drum is the same.

Raise the vehicle and safely support it using steel jack stands.
Remove tire and wheel assembly.
Remove brake drum. Sometimes the brake drum has rusted to the wheel hub and removal of the drum will require a brake drum puller. In some cases, the wheel hub is integral to the brake drum, in which case the hub-bearing retaining bolt and the wheel bearing must be removed to replace the drum.
Measure the interior diameter of the machined surface in the drum with a brake drum micrometer or similar measuring tool. If sufficient metal exists to resurface the drum on a brake lathe, the mechanic will compare the cost of such restoration to the alternative: buying a new drum.
Prior to installing the resurfaced or new drum, the brake shoes, springs, wheel cylinder, parking brake mechanism, and backing plate are all inspected. All worn parts should be replaced. Generally, if drums have been replaced or resurfaced, new brake shoes should be installed. The worn shoes will cause irregular wear in the brake drum and reduce braking effectiveness.
The shoes are adjusted and the drum is installed. The wheel and tire assembly are installed and torqued in the proper sequence and the car is road tested to check the operation of the brakes.

Is it safe to drive with a brake drum problem?

No. Should there be a deficiency with the brake drums, stopping distances will not be as short as possible. In a panic stop, stopping just five or ten feet shorter could be the difference between no collision and a collision. Any deficiency in a vehicle’s braking system is a cause for concern and a potential safety issue. Have the brake drums inspected at your earliest convenience to determine if a problem exists and find out what must be done to fix it.

When replacing brake drums keep in mind:

With few exceptions, brake work on one end of an axle should be performed on both ends of the axle. Should a brake drum on one end of a front or rear axle be serviced, or brake shoes on one end are serviced, both sides of the axle should receive the same service. This helps to avoid problems, such as pulling, vibration, and so forth, once the vehicle is returned for use.
Brake drum systems use very powerful springs to keep the brake shoes in position. These springs are exposed to extreme heat. It is best practice to replace all springs whenever new shoes are installed. Should a spring unexpectedly break in the brake drum assembly, a mispositioned brake shoe could cause the brakes to grab and lock, which would pose a safety issue.
If the wheel hub and bearing are integral to the brake drum on your car, the mechanic may recommend replacement of the grease in the wheel bearings and inspection of the wheel bearings.
Since the arc of the brake shoes will not perfectly match with the arc of the drum when new, expect a bed-in period before maximum braking efficiency is achieved.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(124)

Rating Summary

110

5

1

3

5

110

5

1

3

5

SEE REVIEWS NEAR ME

Rafael

27 years of experience

74 reviews

Rafael

27 years of experience

by Patrick

Ford Bronco V8-5.8L - Power Steering Pump - Berkeley, California

Rafael is the best mechanic I have come across in a while. Very nice and knowledgable He is A very good and honest mechanic.

Manuel

32 years of experience

579 reviews

Manuel

32 years of experience

by Steven

Ford Bronco V8-5.8L - Car is not starting - Trabuco Canyon, California

Manuel was excelllent! Would absolutely use him again!

Rigoberto

11 years of experience

739 reviews

Request Rigoberto

Rigoberto

11 years of experience

Request Rigoberto

by Jacob

Ford Bronco V8-5.8L - Car is not starting - Chicago, Illinois

Rigo is a pro. He diagnosed a no start condition on my Bronco quickly and methodically using a logical textbook diagnosing method. He eliminated a series of logical possibilities until there was only one left - a subpar replacement job by my regular mechanic as I had expected. He also didn't take any shortcuts that could have caused problems later on. My experience was much better than expected given my history with some mechanics and couldn't have gone any better.

Breck

20 years of experience

681 reviews

Breck

20 years of experience

by Ricky

Ford Bronco V8-5.8L - Windows - Houston, Texas

Took care if what I needed and informed me of other things I may need in the future

Excellent Rating

(124)

Rating Summary

110

5

1

3

5

110

5

1

3

5

SEE REVIEWS NEAR ME

Recent articles & questions

Understanding All the Drive Belts in Your Car

Your car’s engine has a number of mechanical parts attached to it that perform essential functions like delivering power (the alternator), cooling...

P2441 OBD-II Trouble Code: Secondary Air Injection System Switching Valve Stuck Closed Bank 1

P2441 P2441 code definition Secondary Air Injection System Switching Valve Stuck Closed Bank 1 What the P2441 code means P2441 is an OBD-II code for the engine control module (ECM) detecting no exhaust pulse while monitoring the exhaust pressure sensor...

How to Remove, Install, and Adjust Ignition Timing

Ignition distributors help spark the gas and air in the engine. Worn distributors need to be removed to be cleaned to maintain proper ignition timing.

Grinding noise when brake is applied

A grinding noise can be the brake pad material or the pads worn down to metal. The shaking when you brake is most likely the front rotors being warped. Sometimes the rotors will feel okay during light braking, but will...

Jerking reaction when accelerating

What you are describing sounds like an ignition problem or a lean fuel issue. I would start with checking items like the mass air flow sensor, O2 sensor, etc. since these types of items can affect air/fuel mixture controlling the...

So how would a relay,a fuse, cost for windshield wipers?

Hi Marques. Thanks for contacting us today. If your wipers are not working correct, it could be due to multiple reasons. Before we can give you an estimate for repair, it would be required to correctly diagnose the issue, so...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com