Ford Bronco II Brake Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(25)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(25)

Brake Hose Replacement Service

How much does a Brake Hose Replacement cost?

On average, the cost for a Ford Bronco II Brake Hose Replacement is $204 with $42 for parts and $161 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1986 Ford Bronco IIV6-2.9LService typeBrake Hose - Passenger Side Front ReplacementEstimate$305.70Shop/Dealer Price$350.26 - $445.68
1988 Ford Bronco IIV6-2.9LService typeBrake Hose - Passenger Side Rear ReplacementEstimate$281.20Shop/Dealer Price$326.79 - $422.98
1987 Ford Bronco IIV6-2.9LService typeBrake Hose - Passenger Side Front ReplacementEstimate$279.10Shop/Dealer Price$325.54 - $426.53
1984 Ford Bronco IIV6-2.8LService typeBrake Hose - Driver Side Rear ReplacementEstimate$255.68Shop/Dealer Price$294.85 - $371.87
1986 Ford Bronco IIV6-2.9LService typeBrake Hose - Driver Side Rear ReplacementEstimate$281.20Shop/Dealer Price$326.82 - $423.03
1985 Ford Bronco IIV6-2.8LService typeBrake Hose - Driver Side Front ReplacementEstimate$275.24Shop/Dealer Price$320.71 - $418.81
1986 Ford Bronco IIV6-2.9LService typeBrake Hose - Passenger Side Rear ReplacementEstimate$290.20Shop/Dealer Price$335.54 - $431.55
1985 Ford Bronco IIV6-2.8LService typeBrake Hose - Passenger Side Rear ReplacementEstimate$290.20Shop/Dealer Price$336.21 - $432.72
Show example Ford Bronco II Brake Hose Replacement prices

What is the brake hose and how does it work?

The hydraulic steel brake lines that carry brake fluid in your car are bolted to the frame of the vehicle. These metal brake lines must eventually attach to the individual wheel calipers — or wheel cylinders in the case of drum brakes — at all four wheels. Since the wheels constantly move up and down, or left and right in the case of the front wheels, the brake line that attaches to the individual wheel calipers must be highly flexible. Enter the brake hose: a flexible, synthetic, reinforced-rubber hose designed to withstand the 1,000 PSI plus pressures that occur when you apply the brakes. There is at least one brake hose at each wheel position, and sometimes two depending on the suspension design. At the end of each rubber hose are steel connections with seals to maintain a leak-proof connection.

Brake Hoses

When to consider replacing the brake hose:

  • Physical damage. If there are cuts, cracks, abrasions, bulging, or excessive rust at the hose fitting ends, the hose should be replaced.
  • Leaks. Seepage at hose fittings, or leaks anywhere along the hose, requires replacement. If there is a leak, or the hose is bulging, you may notice that the brake pedal is lower than usual or spongy.
  • Internal hose failure. Occasionally, the lining on the interior of the hose can separate, blocking the flow of hydraulic fluid. This is diagnosed using test gauges. A fluid blockage that prevents the brakes from releasing may manifest itself as dragging brakes or overheated brakes.
  • End of Lifetime. Although many brake hoses can last 20 plus years if well-made out of quality materials, after 10 years of service it is best to replace the hoses with new ones for maximum reliability and safety.

How do mechanics replace the brake hose?

  • The vehicle is jacked up and safely supported with steel jack stands.
  • The wheel and tire assembly are removed.
  • A pan is put in place to catch brake fluid.
  • Residual pressure in the brake line is relieved by momentarily opening the brake caliper bleeder screw.
  • Each hose end is detached. At the caliper, the attachment is often a banjo style bolt with one-time-use copper washers. The attachment at the vehicle frame is typically a flare connection, so a tube nut must be loosened. Once both ends are detached, the hose is removed.
  • The new hose is installed using new copper-sealing washers and the factory OEM torque on the tube nut and the banjo bolt.
  • Finally, the brake system is bled to remove all air and the vehicle is road tested. A final check for leaks is performed after the road test.

Is it safe to drive with a brake hose problem?

No. Properly working brakes are always essential. If you suspect damage to the brake hoses or see leaks it is a good idea to have a professional evaluate your car’s brakes.

When replacing a brake hose keep in mind:

  • If a brake hose is replaced due to aging, the mechanic will check all of the other brake hoses as they may be worn or defective as well.
  • Some vehicles have flexible, braided stainless steel brake hoses, or other specially designed hoses. If your car does not have ordinary synthetic rubber hoses, a mechanic will let you know what type of new brake hose you have and what your replacement options are.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(25)

Rating Summary
22
2
0
0
1
22
2
0
0
1

Ejnar

29 years of experience
107 reviews
Ejnar
29 years of experience
Ford Bronco II V6-2.9L - Starter Solenoid Replacement - Fremont, California
Came twice. Once to do the diagnosis, and second time to do the fix. On time both times and thorough in his approach. Diagnosed the problem correctly and fixed it. Took care to make sure everything else was returned to original condition.

Ramon

20 years of experience
166 reviews
Ramon
20 years of experience
Ford Bronco II V6-2.9L - Brakes, Steering and Suspension Inspection - Tucson, Arizona
Great info, very experienced. Good job

Kerry

31 years of experience
27 reviews
Kerry
31 years of experience
Ford Bronco II V6-2.9L - Car starts and then dies - Covington, Georgia
Kerry was on time, and he described each diagnostic test that he performed. When he left , he told me the cause of the problem. The fuel pump was not keeping the correct pressure while the vehicle was running. This was caused by the vehicle sitting for a long period of time and the gas tank had developed rust and water in the gas. He showed me samples of the bad gas coming from the fuel pump. He is professional, knowledgeable, and friendly.

Ramon

20 years of experience
166 reviews
Ramon
20 years of experience
Ford Bronco II V6-2.9L - Spark Plugs - Tucson, Arizona
GREAT work!

Excellent Rating

(25)

Rating Summary
22
2
0
0
1
22
2
0
0
1
Number of Ford Bronco II services completed
275+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1700+
experts on our platform

Recent articles & questions

How to Transfer a Car Title in Hawaii
In In order to prove ownership of a vehicle, there must be a title in the owner’s name. For vehicles that aren’t paid off, the lender will hold the title and provide a certificate for the owner to use. However,...
What Does the Lane Departure Warning Light Mean?
The lane departure light means the vehicle is detected to be moving out of its current lane without signaling. It may assist to keep you in your lane.
How to Build a Headache Rack For Your Pickup Truck
Headache racks protect pickup truck cabs from loose objects in the truck bed. Learn how to build and install a headache rack for your pickup truck.

Heat only works when accelerating

Hello. I suspect the heater control valve is the culprit here. Most likely only opening partially. By only being partially open, it allows more hot water to circulate when the engine load and RPM are higher, as when you accelerate,...

i was driving my acura integra , i had stopped at a red light i out it in 1st gear but wasn´t going nowhere like if my e brake was

Hello, thank you for writing in. The lack of transmission fluid is why you are not able to send the power from the engine to the wheels. The first step is to identify and fix the cause of the transmission...

96 dodge ram pickup left turn signal works but rear does not new bulb seems to have power until you install bulb check with light from behind then no power

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com