Dodge W150 Valve Cover Gasket Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(110)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(110)

Valve Cover Gasket Replacement Service

How much does a Valve Cover Gasket Replacement cost?

On average, the cost for a Dodge W150 Valve Cover Gasket Replacement is $132 with $37 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1993 Dodge W150V8-5.2LService typeValve Cover Gasket ReplacementEstimate$387.87Shop/Dealer Price$466.09 - $678.25
1980 Dodge W150V8-5.9LService typeValve Cover Gasket ReplacementEstimate$270.19Shop/Dealer Price$324.01 - $462.92
1986 Dodge W150V8-5.9LService typeValve Cover Gasket ReplacementEstimate$298.69Shop/Dealer Price$355.51 - $496.68
1992 Dodge W150V6-3.9LService typeValve Cover Gasket ReplacementEstimate$205.71Shop/Dealer Price$239.26 - $310.67
1990 Dodge W150V8-5.9LService typeValve Cover Gasket ReplacementEstimate$298.69Shop/Dealer Price$355.53 - $496.71
1981 Dodge W150V8-5.9LService typeValve Cover Gasket ReplacementEstimate$270.19Shop/Dealer Price$324.01 - $462.92
1991 Dodge W150V8-5.9LService typeValve Cover Gasket ReplacementEstimate$375.71Shop/Dealer Price$449.98 - $643.91
1984 Dodge W150V8-5.9LService typeValve Cover Gasket ReplacementEstimate$275.19Shop/Dealer Price$329.24 - $468.34
Show example Dodge W150 Valve Cover Gasket Replacement prices

What is a valve cover gasket and how does it work?

Each cylinder head on your car’s engine has an aluminum or plastic valve cover bolted to it. Between this valve cover and the cylinder head, there is a gasket that keeps engine oil from leaking out. The valve cover bolts keep the gasket compressed, thus preventing leaks. Over time the gasket becomes brittle from the engine’s heat or the bolts loosen, creating an engine oil leak.

When to consider replacing a valve cover gasket?

Look for these signs of oil leakage at the valve cover gasket:

  • Oil seepage or dripping. Should the joint between the valve cover and the cylinder head fail, oil often becomes visible on the valve cover or cylinder heads. Usually, the oil will attract and hold dirt.
  • Oil accumulating inside the spark plug well. The spark plug tube seals are part of the valve cover sealing system. If the tube seals are leaking, you will see oil on the spark plugs or wires. The valve cover gasket and tube seals are all replaced at one time if either fails.
  • Oil leakage at the rubber grommets. The bolts holding the valve cover to the cylinder head sometimes have rubber grommet seals under the bolt heads. If these seals are leaking, you will see oil seepage around the bolt heads.

How do mechanics replace a valve cover gasket?

  • Remove engine cover. Some engines have plastic covers over the entire top. The plastic engine cover is removed to access the valve cover(s).
  • Remove components. On 4 cylinder engines, the valve cover is usually readily accessed once any electrical components and emission control tubing are removed, plus any accelerator linkages that might be in the way. On 6 or 8 cylinder engines, depending on which valve cover gasket is leaking, removal of the air intake plenum might be required, as well as additional steps.
  • Remove valve cover. Once the valve cover(s) is accessed, the cover retaining bolts are removed and the cover pulled off. The valve cover sealing surface is checked with a straight edge to be sure the cover is flat and thus reusable.
  • Install new gasket. The new valve cover gasket is applied along with new rubber grommets under the retaining bolt heads. If there are spark plug tube seals, these are replaced as well. In some applications, oil resistant RTV (room temperature vulcanization) sealant must be applied to specific segments of the sealing surface, along with the new gasket, to ensure a complete and effective seal. The cover is bolted back on, using a calibrated inch pound torque wrench, and all other components are restored to their original position.
  • Check for leaks. Finally, the car engine is run and a visual check is made for oil leaks.

Is it safe to drive with a valve cover gasket problem?

Yes, as long as the amount of oil leaking is small, and there is no leak onto hot engine parts such as the exhaust manifold, it is safe to drive your car until you have an opportunity to fix it.

If you notice oil leaking on to the ground beneath your car after it is parked, you do not have a small leak, and it needs to be found and repaired as soon as possible. Any leak, of course, means your oil level is dropping as you drive the car. If you have a leak, be sure to check your oil more frequently than usual so you do not run low on oil and damage the engine.

When replacing a valve cover gasket keep in mind:

  • The mechanical components of a car engine will typically outlive the gaskets used to seal the engine. However, many of these gaskets, including the valve cover gaskets, are relatively easy to replace.
  • Never add stop leak type products to engine oil or other vehicle fluids. Not only are these materials not approved or specified by the original equipment manufacturers, but they also can create additional problems that may be costly to repair.
  • Often, if a car is old enough to have a valve cover oil leak, there will be oil leaks elsewhere on the engine, so you should request a complete leak inspection. It may be more cost effective to repair multiple leaks during one service call.
  • Often, the PCV (Positive Crankcase Ventilation) valve is inserted into a rubber grommet in one of the valve covers. An old rubber grommet is a potential leak source, as well as connections to the PCV valve. These components should be inspected and considered for replacement while there is access to the valve cover.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Dodge mechanics

Real customer reviews from Dodge owners like you.

Excellent Rating

(110)

Rating Summary
105
3
2
0
0
105
3
2
0
0

Peter

13 years of experience
3 reviews
Peter
13 years of experience
Dodge W150 V8-5.2L - Car is hesitating and bucking Inspection - Richmond, Virginia
It was overall a great experience

Trung

12 years of experience
412 reviews
Trung
12 years of experience
Dodge Stratus V6-3.0L - Valve Cover Gasket - San Mateo, California
Showed up on time, did a great job & completed all tasks.

Brian

23 years of experience
658 reviews
Brian
23 years of experience
Dodge Journey V6-3.5L - Valve Cover Gasket - Jacksonville, Florida
I was able to work while Brian ensured all work was completed satisfactory. Highly recommend this service to both friends and family.

Patrick

33 years of experience
1408 reviews
Patrick
33 years of experience
Dodge Charger V8-5.7L - Valve Cover Gasket Replacement - Pflugerville, Texas
Great mechanic. Very pleasant to work with and very knowledgeable.

Excellent Rating

(110)

Rating Summary
105
3
2
0
0
105
3
2
0
0
Number of Dodge Valve Cover Gasket Replacement services completed
1210+
services done by our mechanics
TOTAL NUMBER OF EXPERT Dodge MECHANICS
1400+
experts on our platform

Recent articles & questions

How to Transfer a Car Title in South Dakota
In In South Dakota, a car title shows who owns a vehicle. This is a crucial document, and if there is a change in ownership, whether due to buying, selling, gifting or inheriting, the title needs to be updated to...
How to Get a Georgia Driver's Permit
Georgia Georgia is another state that uses a graduated driver's licensing program, which most states require. This program states that those under 18 must obtain a learner’s permit, that slowly graduates to a full license as the driver gains experience...
P0894 OBD-II Trouble Code: Transmission Component Slipping
P0894 means there is an issue with the vehicle’s automatic transmission component due to low, empty, or dirty fluid, or faulty shift solenoids.

Low hovering/humming (not high pitched) sound driving over 35mph.

Hello there, thank you for asking about your 2006 Chevrolet Malibu. Failed wheel bearings will not typically cause the vehicle to shake. They will instead make exactly the noise you are describing: humming. Although humming is typical, there are other...

Yes, I have a 2000 Chevy 3500 5.7L truck which just stopped turnning over, I tested the battery and changed the starter so far.

Hi There, Depending on whether or not the vehicle will turn over will determine what the next step should be. If the engine does not turn over, I would recommend checking all connections related to the battery and check to...

2006 Saturn vue won’t start

It is possible that the spark plug on that cylinder or the ignition coil has failed. I would recommend having these check by qualified professional in your area. This can be done by switching them to another cylinder to determine...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com