Dodge W150 Car Thermostat Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(248)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(248)

Car Thermostat Replacement Service

How much does a Car Thermostat Replacement cost?

On average, the cost for a Dodge W150 Car Thermostat Replacement is $200 with $60 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1990 Dodge W150V8-5.9LService typeCar Thermostat ReplacementEstimate$311.14Shop/Dealer Price$353.78 - $473.58
1991 Dodge W150V8-5.2LService typeCar Thermostat ReplacementEstimate$302.13Shop/Dealer Price$343.00 - $461.48
1993 Dodge W150V8-5.9LService typeCar Thermostat ReplacementEstimate$302.13Shop/Dealer Price$343.02 - $461.52
1991 Dodge W150V6-3.9LService typeCar Thermostat ReplacementEstimate$302.13Shop/Dealer Price$343.02 - $461.52
1990 Dodge W150V6-3.9LService typeCar Thermostat ReplacementEstimate$302.13Shop/Dealer Price$344.50 - $464.10
1993 Dodge W150V6-3.9LService typeCar Thermostat ReplacementEstimate$302.13Shop/Dealer Price$343.16 - $461.77
1991 Dodge W150V8-5.9LService typeCar Thermostat ReplacementEstimate$302.13Shop/Dealer Price$343.04 - $461.55
1993 Dodge W150V8-5.2LService typeCar Thermostat ReplacementEstimate$302.13Shop/Dealer Price$343.02 - $461.52
Show example Dodge W150 Car Thermostat Replacement prices

What is an engine cooling system thermostat and how does it work?

The car's engine cooling system thermostat is a small valve within a cooling system passageway that opens and closes in response to the temperature of the circulating engine coolant. When your car is first started and the coolant is cold, the valve in the thermostat will be in the closed position, circulating the coolant flow only within the engine instead of flowing to the radiator, which allows the engine to warm up fast, promoting fuel efficiency, low emissions, and reduced engine deposits. Once the engine coolant reaches the design temperature, usually around 195 degrees, the valve will open and close as you drive in order to maintain a coolant temperature typically between 195 to 225 degrees Fahrenheit.

Thermostat

When to consider replacing the engine cooling system thermostat:

  • Engine overheats. A thermostat with the valve stuck closed is a common cause of engine overheating. However, since there are other causes of overheating, a mechanic will thoroughly inspect the cooling system prior to condemning the thermostat. Since it is usually not known how badly the engine overheated, the mechanic will also try to determine if there is evidence that the cylinder head gasket was blown. If so, it would be repaired prior to replacing the thermostat.
  • Temperature gauge reads too low or too high. Thermostats can get sticky, causing the engine temperature to stray from the optimal range. Your dash-mounted temperature gauge will notify you of this malfunction.
  • Cooling system repairs. All thermostats eventually fail. Therefore, if the cooling system is already open for major repairs, such as water pump or radiator replacement, it is recommended to install a new thermostat simply as insurance against future breakdown.

How do mechanics replace the engine cooling system thermostat?

  • Once the engine is completely cold, the radiator cap is loosened and enough coolant is drained from the radiator so the coolant level is below the thermostat housing.
  • The thermostat housing is removed and the thermostat and gasket are extracted. Note that some cars have more than one cooling system thermostat and both might need replacement.
  • All mounting surfaces on the thermostat housing are cleaned of old gasket material. A new gasket is applied and the thermostat is re-installed in the correct orientation and with the temperature sensing cylinder facing downward towards the engine.
  • The thermostat housing bolts are tightened to original equipment manufacturer (OEM) specifications using a calibrated inch-pound torque wrench.
  • The cooling system is refilled with the appropriate coolant type and the system is fully bled of all air.
  • The car engine is run until the normal operating temperature is reached, and while taking precautions with the hot coolant, the coolant level is rechecked while confirming there is flow through the radiator — either visually or with an infrared temperature gun. This will confirm the thermostat is open. Finally, the engine is checked for leaks.

Is it safe to drive with an engine cooling system thermostat problem?

No. If it has been determined that there is a thermostat problem, it should be repaired right away. Failure to do so can cause substantial and costly damage to the engine.

When replacing the engine cooling system thermostat keep in mind:

  • Engine overheating due to causes other than a faulty thermostat, will themselves damage a thermostat. Therefore, always replace the thermostat if the engine overheats, even if the thermostat was not the initial cause of the overheating.
  • The thermostat should be replaced anytime you have major work done on the coolant system. It is convenient and costs little during such repairs and insurance against future breakdown.
  • OEM thermostats are the best ones to use and you can request your mechanic to install only the OEM thermostat. Dealer supplied, OEM thermostats are sometimes more costly but are generally higher quality and specifically engineered for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Dodge mechanics

Real customer reviews from Dodge owners like you.

Excellent Rating

(248)

Rating Summary
235
6
0
2
5
235
6
0
2
5

Peter

14 years of experience
3 reviews
Peter
14 years of experience
Dodge W150 V8-5.2L - Car is hesitating and bucking Inspection - Richmond, Virginia
It was overall a great experience

Victor

21 years of experience
72 reviews
Victor
21 years of experience
Dodge Challenger V6-3.6L - Thermostat - Irving, Texas
excellent

Collins

13 years of experience
678 reviews
Collins
13 years of experience
Dodge Challenger V8-5.7L - Thermostat - Atlanta, Georgia
He always provides prompt and satisfactory service. Always pleased with his work.

Dante

37 years of experience
98 reviews
Dante
37 years of experience
Dodge Ram 1500 V8-5.9L - Thermostat - Lakewood, California
Great service as always.

Excellent Rating

(248)

Rating Summary
235
6
0
2
5
235
6
0
2
5
Number of Dodge Car Thermostat Replacement services completed
2728+
services done by our mechanics
TOTAL NUMBER OF EXPERT Dodge MECHANICS
1400+
experts on our platform

Recent articles & questions

How to Replace a Brake Hose
Modern Modern cars use a combination of metal lines and rubber hoses to contain and transfer the fluid that applies your brakes. The lines coming out of the brake master cylinder are made of metal to be strong and long...
What Are Daytime Running Lights
Once Once upon a time, the average vehicle only had a handful of lights – headlights, taillights, brake lights, reverse lights and turn signals. Today, there are others, including fog lights and daytime running lights (DRL). Read on to find...
P0296 OBD-II Trouble Code: Cylinder 12 Contribution/Balance Fault
P0296 P0296 code definition The P0296 code means that the PCM detects that the voltage reading for the fuel injector circuit in cylinder 12 does not align with the manufacturer’s specifications. What the P0296 code means Part of the fuel...

How do I reset the Maintenance Minder?

The Maintenance Minder lets you know when your vehicle is due for regular maintenance. The system can be reset after your car has received maintenance. Here’s how to reset the Maintenance Minder using the multi-information display: 1. Turn the ignition...

The engine light is on and displaying a P1101 code on my code reader.

Hi and thanks for contacting Your Mechanic. The code P1101 means that the mass airflow sensor (MAF) is out of self-test range. Check to see if the clamps to the sensor are tight. A slight leak of air around the...

OD light flaahing after transmission fluid flush

Hi there. Typically a transmission fluid flush and filter change would resolve these type of symptoms. However, it is possible that an inner seal is damaged, that may have been pushed out during the fluid flush. It's probably a good...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com