Dodge Stratus Distributor Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(207)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(207)

Distributor Replacement Service

How much does a Distributor Replacement cost?

On average, the cost for a Dodge Stratus Distributor Replacement is $514 with $318 for parts and $196 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1997 Dodge StratusV6-2.5LService typeDistributor ReplacementEstimate$887.40Shop/Dealer Price$1060.04 - $1566.62
1995 Dodge StratusV6-2.5LService typeDistributor ReplacementEstimate$874.79Shop/Dealer Price$1044.95 - $1549.68
1998 Dodge StratusV6-2.5LService typeDistributor ReplacementEstimate$874.79Shop/Dealer Price$1044.99 - $1549.74
2005 Dodge StratusV6-3.0LService typeDistributor ReplacementEstimate$927.04Shop/Dealer Price$1089.52 - $1568.60
1999 Dodge StratusV6-2.5LService typeDistributor ReplacementEstimate$874.79Shop/Dealer Price$1047.05 - $1553.35
1996 Dodge StratusV6-2.5LService typeDistributor ReplacementEstimate$874.79Shop/Dealer Price$1045.18 - $1550.08
2000 Dodge StratusV6-2.5LService typeDistributor ReplacementEstimate$874.79Shop/Dealer Price$1045.01 - $1549.78
Show example Dodge Stratus Distributor Replacement prices

What is a distributor and how does it work?

The distributor is an electro-mechanical component installed in a car’s ignition system to provide, time, and “distribute” the spark that occurs at each spark plug in an engine’s combustion cylinders. The distributor contains a rotating shaft with a gear at the bottom that engages a gear on the engine’s camshaft. Atop the shaft is a plastic rotor that has electrical contacts molded in. As the plastic rotor turns, it completes a high voltage circuit to each electrical contact, one per engine cylinder, that is molded into a plastic distributor cap. That high voltage then flows along the spark plug wire to the spark plug, creating the spark that ignites the air-fuel mixture in an engine cylinder.

Distributors vary in design: some may have the ignition coil built in, some have vacuum advance mechanisms attached for engine timing, and really old distributors may even have mechanical points. Vintage cars, that is cars older than 25 years, will more commonly be equipped with a distributor. Most modern car designs have replaced the distributor with fully electronic systems controlled by engine sensors for more precise, and more powerful, ignition system operation.

When to consider replacing the distributor:

  • Worn or damaged integral parts. Worn shaft bushings can result in wobbling or eccentric rotation of the rotor, resulting in misfires, loss of power, rough idle and poor mileage. If the shear pin breaks that secures the distributor shaft drive gear, complete loss of ignition spark distribution is the result. A failed ignition module that is mounted to the distributor housing may also be more cost-performance efficient to replace the entire distributor.
  • Visible oil leaks. Distributors are attached to the engine and consequently, there are seals, both internal and external, that keep oil from leaking at the point of attachment. External O-rings are serviceable but if an internal oil leak occurs, due to a worn shaft, for example, it might necessitate rebuilding or replacing the distributor.

How do mechanics replace the distributor?

Distributors are bolted to the engine block or the cylinder head. The replacement procedure is as follows:

  • Once all diagnostic tests are complete and the distributor is confirmed to be faulty, disconnect the battery negative cable.
  • Set engine at top dead center on the compression stroke for cylinder no. 1. Mark location of distributor housing and shaft relative to the engine mounting surface.
  • Remove primary and secondary ignition system wiring connected to the distributor. Unbolt and remove the distributor. Temporarily cover the hole in the head or block so no foreign matter drops into the engine.
  • Install new distributor and new cap and rotor, with the rotor pointing to the cylinder no. 1 firing-order electrode of the distributor cap. Reconnect all wiring and reconnect battery negative cable.
  • Start engine and set basic engine ignition timing per original equipment manager specification. Then check timing advance for proper function. Road test vehicle.

Is it safe to drive with a distributor problem?

Yes. A faulty distributor will cause increased fuel consumption, increased emissions and poor engine operation but does not generally create a safety hazard.

When replacing a distributor keep in mind:

  • Many ignition system failures will mimic a distributor failure, including faulty spark plugs, faulty wiring, and a worn cap and rotor. Mechanics will always test the distributor directly to ensure it is not needlessly replaced.
  • If a distributor is removed for testing and then re-installed, be sure that new o-rings are installed. Re-using old o-rings often results in oil leaks.
  • If the distributor is replaced, and the spark plugs and spark plug wires have considerable mileage on them, the best results will be obtained by replacing those components at the same time the new distributor is installed.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Dodge mechanics

Real customer reviews from Dodge owners like you.

Excellent Rating

(207)

Rating Summary
187
14
2
0
4
187
14
2
0
4

Jesse

15 years of experience
14 reviews
Jesse
15 years of experience
Stratus 2005 - Check Engine Light is on - Daytona Beach, FL
Great mechanic, on time, did a thoroiugh car check, explained his findings, offered service recommendations and price quote.

Michael

14 years of experience
11 reviews
Michael
14 years of experience
Stratus 2005 - Battery - Albuquerque, NM
N/A

Levi

8 years of experience
53 reviews
Levi
8 years of experience
Stratus 2002 - Axle / CV Shaft Assembly - Norman, OK
Very personable and knew what he was doing.

Levi

8 years of experience
53 reviews
Levi
8 years of experience
Stratus 2002 - Control Arm Assembly - Norman, OK
Very personable and knew what he was doing.

Excellent Rating

(207)

Rating Summary
187
14
2
0
4
187
14
2
0
4
Number of Dodge Stratus services completed
2277+
services done by our mechanics
TOTAL NUMBER OF EXPERT Dodge MECHANICS
1400+
experts on our platform

Recent articles & questions

How Long Does an Air Spring Bag Last?
Air Air suspension systems have been in place for a long time in the trucking industry, and over the past decade, they have moved into ordinary passenger vehicles. The support to the springs is delivered by means of air spring...
Symptoms of a Bad or Failing Air Bleed Housing Assembly
Common signs include coolant leaks, overheating, and a damaged bleeder valve.
A Buyer's Guide to the 2012 Nissan Pathfinder
Whether Whether you have plans to go off-road or just want a vehicle that’s nice and roomy, the 2012 Nissan Pathfinder is definitely worth a closer look. Key Features As a dual-purpose vehicle, Nissan made the 2012 Pathfinder with three-rows...

Shift to drive but goes to manual mode not automatic.

Hi there. Check the shifter to the transmission. The shifter solenoid is not working properly and needs replaced. Remove the shifter housing from the vehicle and you will see a solenoid in it. This is the shift interlock solenoid for...

Does the Chrysler 4.0 V6 have a timing belt that must be changed?

Hi Stephen. Thanks for contacting us tonight. The 4.0-liter V6 engine has a timing belt that needs to be changed every 100,000 miles.

Car wont start instument cluster keeps flashing power windows and locks dont work scanner wont connect

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com