Dodge Ram 50 Cruise control is not working Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(5)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(5)

Cruise control is not working Inspection Service

How much does a Cruise control is not working Inspection cost?

On average, the cost for a Dodge Ram 50 Cruise control is not working Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1993 Dodge Ram 50L4-2.4LService typeCruise control is not working InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1987 Dodge Ram 50L4-2.0LService typeCruise control is not working InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1990 Dodge Ram 50V6-3.0LService typeCruise control is not working InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1990 Dodge Ram 50L4-2.4LService typeCruise control is not working InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
1988 Dodge Ram 50L4-2.0LService typeCruise control is not working InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
1985 Dodge Ram 50L4-2.0LService typeCruise control is not working InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1985 Dodge Ram 50L4-2.3L Turbo DieselService typeCruise control is not working InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
1984 Dodge Ram 50L4-2.6LService typeCruise control is not working InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Dodge Ram 50 Cruise control is not working Inspection prices

Cruise control can be very convenient when on a long drive or when on the highway. By setting a speed, you can relax your foot and let the vehicle maintain speed. More modern cruise control systems even allow you to maintain speed and a certain distance behind the vehicle in front of you. When cruise control fails, it can be annoying, but when it fails suddenly it may be dangerous. A sudden failure by the cruise control may mean your vehicle is rapidly decelerating. Even when cruise control is on, it is important to remain a vigilant driver.

How this system works:

Cruise control systems have changed as cars have become more modern. Newer cars use a fully electronic setup to maintain speed and may be able to maintain speed and distance behind the car in front of you. These systems are controlled through the vehicle’s computer or ECU (electronic control unit). Older cars may use what is called electromechanical cruise control. In this setup, a vacuum actuator is physically connected to the throttle by a cable or chain. The cable adjusts to increase or decrease throttle position based upon the actions of the actuator. A mechanic will let you know what kind of setup you have on your vehicle.

Common reasons for this to happen:

  • Bad Fuse: Like many electronically controlled systems in your car, the cruise control has a corresponding fuse which will blow to protect the system if it senses a short circuit. When the fuse of for the cruise control blows, the cruise control will stop working altogether.

  • Failing Brake Pedal Switch: The brake pedal switch turns on the vehicles brake lights when it senses that the brake pedal has been pressed. Because cruise control systems have been designed to disengage when the brake pedal is pressed, the cruise control is wired to the brake pedal switch. If the brake pedal switch fails, the car may think the brakes are engaged and not allow the cruise control system to turn on.

  • Failing Speed Sensor: A speed sensor has many purposes including indicating the speed of the vehicle, regulating flow of fuel and ignition timing, and operating the cruise control. If the speed sensor fails the cruise control may stop working. You may also notice that the speedometer has stopped working and the engine has more difficulty when idling.

  • Damaged Vacuum Actuator/Hoses/Cable: On older vehicles, cruise control speed is maintained using a vacuum actuator and a cable connected to the throttle. A vehicle’s cruise control may stop working if the vacuum actuator has stopped working or if there is damage to the vacuum hoses. The system may also fail if the cable linking the actuator to the throttle is broken.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the reason why your vehicle’s cruise control system has stopped working. The mechanic will then provide a detailed inspection report outlining the nature of the system failure and the cost of any repairs that need to be made.

How it's done:

The mechanic will first want to connect to the vehicle’s ECU through a code reader/scanner. This will allow the mechanic to read and trouble codes and better diagnose what component may have failed.

If the mechanic determines that there is a bad fuse, he or she will find the corresponding fuse for the cruise control system to see if it has failed. If the fuse has blown, the mechanic will remove it and replace it with a fuse rated for the correct amperage.

If the mechanic believes that the brake pedal switch has failed, he or she will examine the switch to check for any superficial damage. The mechanic should then check the wiring connected to the switch and change it if necessary. When the switch has been replaced, the mechanic should make sure that both the brake lights and the cruise control system are working properly.

To check the speed sensor, the mechanic will have to get underneath the vehicle. While underneath, the mechanic will find the sensor and examine it and the surrounding wires for damage. The mechanic will then replace the sensor and then check the wires going from the sensor up to the speedometer and cruise control switches to endure that they are not frayed.

If the mechanic believes that the vacuum actuator or the corresponding hoses and cable have failed, he or she will open the hood and locate the actuator. The mechanic will first check the hoses and cable to make sure that they are in good working order. He or she will then replace the actuator as necessary.

In all of these repair scenarios the mechanic will ask to test drive the vehicle to make sure that the cruise control is working properly. He or she should also use their code reader/scanner to clear any trouble codes that may have been produced when the cruise control system was not working.

How important is this service?

A failed cruise control system can be a signal that other repairs may need to be made soon. By examining the cruise control, the mechanic is likely to also inspect other systems on the car including the brake lights and speedometer. While driving without cruise control may be an inconvenience, a sudden failure of the cruise control system could be potentially dangerous for a driver who is not vigilant. If you notice that your vehicle’s cruise control has stopped working you should have a mechanic check it to determine the nature of the problem.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Dodge mechanics

Real customer reviews from Dodge owners like you.

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0

Alexander

29 years of experience
45 reviews
Alexander
29 years of experience
Dodge Ram 50 L4-2.0L - Car is not starting - Los Altos, California
He was able to come a day early he was quick and proffessional

Richard

11 years of experience
265 reviews
Richard
11 years of experience
Dodge Grand Caravan V6-3.3L - Cruise control is not working - Antioch, Tennessee
Richard was right on time and had the knowledge and skill to diagnose my cruise control problem.

Bryant

12 years of experience
600 reviews
Bryant
12 years of experience
Dodge Journey L4-2.4L - Cruise control is not working Inspection - Indianapolis, Indiana
It was very good he made the service very knowledgeable and fast. Booked another appointment already.

John

27 years of experience
1019 reviews
John
27 years of experience
Dodge Dakota V6-3.9L - Cruise control is not working - Alvin, Texas
John is always early for our appointments. He did an awesome job changing oil and a badly needed tune up. He discovered one of the spark plug wires was cracked and exposed. Amazing the truck even worked. Very much appreciate John's expertise.

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0
Number of Dodge Cruise control is not working Inspection services completed
55+
services done by our mechanics
TOTAL NUMBER OF EXPERT Dodge MECHANICS
1400+
experts on our platform

Recent articles & questions

Top 10 Scenic Drives in Southern California
Southern California has some of the most diverse landscape and terrain in the world, and this makes it an ideal region to explore by way of a scenic drive. Over the course of an hour, afternoon, or even a weekend,...
P2112 OBD-II Trouble Code: Throttle Actuator Control System - Stuck Closed
P2112 code definition Throttle Actuator Control System - Stuck Closed What the P2112 code means P2112 is a general ODB2 diagnostic trouble...
How to Become a Certified Mobile Vehicle Inspector (State Car Inspector Certified) in West Virginia
Automotive technician jobs include mobile vehicle inspectors. Learn how to do car checks in West Virginia through a formal institution such as ASE.

Catalytic converter bad.

Catalytic converters (https://www.yourmechanic.com/services/catalytic-converter-replacement) do have a federal required warranty that most people are unaware of, talk to your dealer to find out if you are still covered. Early catalytic converter failure can be cause by other factors including coolant contamination...

Car engine makes hissing sound when driving and bogs down when idling. 2004 Nissan Maxima

Hi there - you are on the right track. If the hiss comes more directly from the engine (with the hood up for example), you probably have an air leak in the intake tract (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-intake-manifold-gaskets) of the engine. If the...

How does eps work in a 2013 Dodge ram 1500? I replaced rack and pinion and still don't have power steering?

Hello. This system works with several inputs including vehicle speed and the steering angle sensor. If you are not getting any power assist then the system needs to be scanned for codes and the inputs checked to see what is...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com