Dodge Ram 1500 Power Steering Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(22)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(22)

Power Steering Pump Replacement Service

How much does a Power Steering Pump Replacement cost?

On average, the cost for a Dodge Ram 1500 Power Steering Pump Replacement is $259 with $119 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2003 Dodge Ram 1500V6-3.7LService typePower Steering Pump ReplacementEstimate$468.50Shop/Dealer Price$539.93 - $743.69
2008 Dodge Ram 1500V8-4.7LService typePower Steering Pump ReplacementEstimate$550.51Shop/Dealer Price$643.07 - $915.40
2001 Dodge Ram 1500V8-5.9LService typePower Steering Pump ReplacementEstimate$384.63Shop/Dealer Price$446.15 - $626.52
2005 Dodge Ram 1500V8-5.7LService typePower Steering Pump ReplacementEstimate$456.79Shop/Dealer Price$525.95 - $728.01
1998 Dodge Ram 1500V8-5.2LService typePower Steering Pump ReplacementEstimate$443.03Shop/Dealer Price$507.35 - $689.83
1994 Dodge Ram 1500V8-5.9LService typePower Steering Pump ReplacementEstimate$384.63Shop/Dealer Price$446.29 - $626.77
1994 Dodge Ram 1500V6-3.9LService typePower Steering Pump ReplacementEstimate$384.63Shop/Dealer Price$446.16 - $626.55
2003 Dodge Ram 1500V8-5.7LService typePower Steering Pump ReplacementEstimate$456.79Shop/Dealer Price$525.95 - $728.01
Show example Dodge Ram 1500 Power Steering Pump Replacement prices

What is the power steering pump and how does it work?

The power steering pump is a belt-driven or electric-driven hydraulic pump that generates the hydraulic pressure needed to provide power steering assist. It develops output pressures of 1,000 PSI or more. The pump output is directed to the steering gear, often a rack and pinion type unit, where the hydraulic pressure pushes on the steering rack, greatly reducing the effort it would otherwise take to turn the steering wheel.

Power Steering

When to consider replacing the power steering pump:

  • Groaning or whining noise when turning. Noise can occur if there is wear on the pump bearings or impeller vanes. A low fluid level or trapped air can also cause noises. If the pump has already been operating while dry, adding fluid may not resolve the noise and replacement of the pump might be necessary.
  • Power steering fluid leaks. Leaks can develop at pump seals, threaded connections, hoses, or on the steering rack and pinion unit. Pump seal leaks will generally require a replacement.
  • Difficult steering. Should you notice it is harder to turn the steering wheel, it might mean the power steering pump output pressure is too low, or there could be blockages in the pump or lines.
  • Damage to the pump pulley. Should the pump pulley become damaged or is loose on the pump shaft, you might detect vibration, drive belt damage, or hard steering. Either the pulley will have to be serviced or the pump assembly replaced.

How do mechanics replace the power steering pump?

  • If driven by a drive belt, the power steering pump is bolted to the engine via a bracket that allows for adjustment of the pump drive belt. Once the engine is cold, and safe to work on, the drive belt is removed.
  • If driven by an electric pump, the pump may be mounted in conjunction with the steering shaft or in conjunction with the steering rack. With either a drive belt or electric pump, removal of any dash, panel, or steering components is performed to access the pump.
  • The threaded connectors to the pump inlet and outlet are loosened and removed.
  • Any mounting bolts and brackets are removed so the pump can be removed.
  • If the old pump has failed catastrophically, or there is reason to suspect contaminants in the power steering hoses, the system is flushed.
  • The new pump is bolted on, the pressure and return hoses attached and the system is bled of all air. If pump is belt-driven, it is tightened to the manufacturer’s specification.
  • Finally, the engine is run and the car is road tested to confirm normal steering effort. If a new drive belt was installed, belt tension is measured again, and adjusted as needed, after the belt has run for a few minutes.

Is it safe to drive with a power steering pump problem?

No. If the power steering pump is operated without an adequate amount of fluid, and the pump reservoir will not hold fluid due to a large leak. The pump could seize, which would snap the serpentine belt and likely leave you stranded. If the pump turns and there is adequate fluid, but there is no power assist, it will require much greater effort to turn the steering wheel, and that presents inherent safety risks. Generally, the wisest course is to seek immediate repairs if you suspect a problem with any component in your car’s power steering system.

When replacing the power steering pump keep in mind:

  • Any belts driving the pump should be inspected and replaced as needed. The pump will only produce the required hydraulic pressure if it is driven by the belt at an adequate speed.
  • Power steering leaks from aged rubber hoses, particularly where the rubber is crimped to the steel tube, are not unusual and should be carefully inspected. The system operates under high pressure. The fluid is flammable, and if leaking fluid happens to contact a hot engine part, a fire might result. You always want to be sure the hoses and connections are sound.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Dodge mechanics

Real customer reviews from Dodge owners like you.

Excellent Rating

(22)

Rating Summary
22
0
0
0
0
22
0
0
0
0

Nathaniel

7 years of experience
260 reviews
Nathaniel
7 years of experience
Ram 1500 2006 - Power Steering Pump - Chesapeake, VA
Nate was easily one of the best experiences I've ever had with a mechanic. He communicated openly and was direct and to the point.

Julius

24 years of experience
15 reviews
Julius
24 years of experience
Ram 1500 2006 - Car is shaking or vibrating - Virginia Beach, VA
Great

Adrian

11 years of experience
26 reviews
Adrian
11 years of experience
Ram 1500 2007 - Wheel Bearings - Stone Mountain, GA
Adrian showed up 5 minutes before the appointment time, which is awesome. He is very courteous and friendly and got the job done in a timely manner.

Daniel

8 years of experience
37 reviews
Daniel
8 years of experience
Ram 1500 2006 - Battery will not hold a charge - Las Vegas, NV
Daniel was great. Professional, knowledgeable. Diagnosed the issue quickly, was isn't easy, as it was an electrical problem. I highly recommend him and will use him again as needed.

Excellent Rating

(22)

Rating Summary
22
0
0
0
0
22
0
0
0
0
Number of Dodge Ram 1500 Power Steering Pump Replacement services completed
242+
services done by our mechanics
TOTAL NUMBER OF EXPERT Dodge MECHANICS
1400+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Electronic Brake Control Module (EBCM)
Common signs include the ABS or Check Engine Lights coming on and the ABS or traction control systems malfunctioning.
10 Best Stores to Buy Auto Parts in Charleston, South Carolina
Automotive technicians rely on auto parts stores to add and replace car parts. The best auto parts shop in Charleston is AutoZone.
P0042 OBD-II Trouble Code: HO2S Heater Control Circuit (Bank 1 Sensor 3)
P0042 P0042 code definition P0042 is telling us the ECM has detected a fault in the heated oxygen sensor control circuit for bank 1 sensor 3. This can be associated with P0043 and P0044 What the P0042 code means The...

How do I change the Bluetooth passkey?

Your car’s Bluetooth connectivity lets you use the hands-free calling system, stream music and more. However, you’ll need to pair your device with the system first. While some phones and other devices are automatically recognized, not all are. In these...

Key stuck in ignition of 2001 Mercedes-Benz ML320

Hello. Most of the time, this is caused by a bad battery in the car. If the battery is low then this will occur. I typically start by checking the battery and doing a load test. If the battery is...

Car stutters when accelerating.

You could have gotten some bad gas from a gas station that has a lot of water in the fuel. When there is excessive water in the fuel, the engine will tend to run rough at a low rpm and...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com