Dodge Intrepid Power Steering Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(91)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(91)

Power Steering Pump Replacement Service

How much does a Power Steering Pump Replacement cost?

On average, the cost for a Dodge Intrepid Power Steering Pump Replacement is $353 with $115 for parts and $238 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1999 Dodge IntrepidV6-2.7LService typePower Steering Pump ReplacementEstimate$518.24Shop/Dealer Price$588.05 - $783.69
2003 Dodge IntrepidV6-3.5LService typePower Steering Pump ReplacementEstimate$543.46Shop/Dealer Price$610.00 - $801.36
1999 Dodge IntrepidV6-3.2LService typePower Steering Pump ReplacementEstimate$509.70Shop/Dealer Price$578.24 - $776.75
1993 Dodge IntrepidV6-3.3LService typePower Steering Pump ReplacementEstimate$477.70Shop/Dealer Price$538.24 - $712.75
2002 Dodge IntrepidV6-2.7LService typePower Steering Pump ReplacementEstimate$546.72Shop/Dealer Price$617.07 - $813.12
2000 Dodge IntrepidV6-2.7LService typePower Steering Pump ReplacementEstimate$502.92Shop/Dealer Price$570.01 - $763.61
1995 Dodge IntrepidV6-3.5LService typePower Steering Pump ReplacementEstimate$538.50Shop/Dealer Price$614.27 - $834.40
2001 Dodge IntrepidV6-2.7LService typePower Steering Pump ReplacementEstimate$546.72Shop/Dealer Price$614.12 - $807.96
Show example Dodge Intrepid Power Steering Pump Replacement prices

What is the power steering pump and how does it work?

The power steering pump is a belt-driven or electric-driven hydraulic pump that generates the hydraulic pressure needed to provide power steering assist. It develops output pressures of 1,000 PSI or more. The pump output is directed to the steering gear, often a rack and pinion type unit, where the hydraulic pressure pushes on the steering rack, greatly reducing the effort it would otherwise take to turn the steering wheel.

Power Steering

When to consider replacing the power steering pump:

  • Groaning or whining noise when turning. Noise can occur if there is wear on the pump bearings or impeller vanes. A low fluid level or trapped air can also cause noises. If the pump has already been operating while dry, adding fluid may not resolve the noise and replacement of the pump might be necessary.
  • Power steering fluid leaks. Leaks can develop at pump seals, threaded connections, hoses, or on the steering rack and pinion unit. Pump seal leaks will generally require a replacement.
  • Difficult steering. Should you notice it is harder to turn the steering wheel, it might mean the power steering pump output pressure is too low, or there could be blockages in the pump or lines.
  • Damage to the pump pulley. Should the pump pulley become damaged or is loose on the pump shaft, you might detect vibration, drive belt damage, or hard steering. Either the pulley will have to be serviced or the pump assembly replaced.

How do mechanics replace the power steering pump?

  • If driven by a drive belt, the power steering pump is bolted to the engine via a bracket that allows for adjustment of the pump drive belt. Once the engine is cold, and safe to work on, the drive belt is removed.
  • If driven by an electric pump, the pump may be mounted in conjunction with the steering shaft or in conjunction with the steering rack. With either a drive belt or electric pump, removal of any dash, panel, or steering components is performed to access the pump.
  • The threaded connectors to the pump inlet and outlet are loosened and removed.
  • Any mounting bolts and brackets are removed so the pump can be removed.
  • If the old pump has failed catastrophically, or there is reason to suspect contaminants in the power steering hoses, the system is flushed.
  • The new pump is bolted on, the pressure and return hoses attached and the system is bled of all air. If pump is belt-driven, it is tightened to the manufacturer’s specification.
  • Finally, the engine is run and the car is road tested to confirm normal steering effort. If a new drive belt was installed, belt tension is measured again, and adjusted as needed, after the belt has run for a few minutes.

Is it safe to drive with a power steering pump problem?

No. If the power steering pump is operated without an adequate amount of fluid, and the pump reservoir will not hold fluid due to a large leak. The pump could seize, which would snap the serpentine belt and likely leave you stranded. If the pump turns and there is adequate fluid, but there is no power assist, it will require much greater effort to turn the steering wheel, and that presents inherent safety risks. Generally, the wisest course is to seek immediate repairs if you suspect a problem with any component in your car’s power steering system.

When replacing the power steering pump keep in mind:

  • Any belts driving the pump should be inspected and replaced as needed. The pump will only produce the required hydraulic pressure if it is driven by the belt at an adequate speed.
  • Power steering leaks from aged rubber hoses, particularly where the rubber is crimped to the steel tube, are not unusual and should be carefully inspected. The system operates under high pressure. The fluid is flammable, and if leaking fluid happens to contact a hot engine part, a fire might result. You always want to be sure the hoses and connections are sound.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Dodge mechanics

Real customer reviews from Dodge owners like you.

Excellent Rating

(91)

Rating Summary
81
2
3
0
5
81
2
3
0
5

Jay

38 years of experience
1035 reviews
Jay
38 years of experience
Dodge Intrepid * - Car is not starting - Riverside, California
Professional and punctual.

Jason

17 years of experience
24 reviews
Jason
17 years of experience
Dodge Intrepid V6-3.5L - Crankshaft Position Sensor - Raleigh, North Carolina
Excellent service, thank you!

Joseph

25 years of experience
44 reviews
Joseph
25 years of experience
Dodge Intrepid V6-3.5L - Thermostat - New River, Arizona
Highly efficient and professional mechanic. He is knowledgeable and pays good attention to detail. He did an overall great job and also kept the work area clean. I would highly recommend Joseph Jock.

Jerel

12 years of experience
125 reviews
Jerel
12 years of experience
Dodge Intrepid V6-2.7L - Coolant is leaking - Morrisville, North Carolina
This guys definitely knows his stuff. I plan on using him again for sure.

Excellent Rating

(91)

Rating Summary
81
2
3
0
5
81
2
3
0
5
Number of Dodge Intrepid services completed
1001+
services done by our mechanics
TOTAL NUMBER OF EXPERT Dodge MECHANICS
1400+
experts on our platform

Recent articles & questions

How Does Adjustable Suspension Work?
Every Every vehicle’s suspension — the collection of parts that supports it, cushions its load from bumps, and enables it to turn — represents a compromise by the designers. Automakers must consider numerous factors in design any vehicle’s suspension, including:...
What is the Manual Transmission Fluid all about?
How do you change manual transmission fluid
5 Essential Things to Know About Vehicle Covers
Whether Whether you are driving a car, truck or SUV, a vehicle cover is critical to ensure that your vehicle is safe from the elements and maintains that just-off-the-lot look. Leaving your car or truck out in the rain can...

How do I use the steering wheel to adjust the volume?

The steering wheel volume switches are located on the back of the steering wheel, on the right side. Using your right hand, feel behind the steering wheel for the volume switches. Press the top of the switch to increase the...

My car ran hot and now it won't start

Hi there. An overheated engine is not a good thing. A severely overheated engine could mean catastrophic damage has occurred. Assuming the engine does not turn over, this would lead me to believe the engine has seized or the head...

Getting fuel, getting spark, and won't start.

Check the ignition timing on the distributor and see if the timing is off. If the timing is good, then the accelerator pump in the carburetor or the fuel injectors are not working properly (if your vehicle has TBI injection)....

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com