Dodge Dakota Throttle Body Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(445)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(445)

Throttle Body Replacement Service

How much does a Throttle Body Replacement cost?

On average, the cost for a Dodge Dakota Throttle Body Replacement is $411 with $271 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1994 Dodge DakotaV6-3.9LService typeThrottle Body ReplacementEstimate$2441.34Shop/Dealer Price$3016.53 - $4733.98
1995 Dodge DakotaL4-2.5LService typeThrottle Body ReplacementEstimate$835.55Shop/Dealer Price$1009.77 - $1528.32
2009 Dodge DakotaV8-4.7LService typeThrottle Body ReplacementEstimate$690.11Shop/Dealer Price$828.00 - $1237.48
1994 Dodge DakotaV8-5.2LService typeThrottle Body ReplacementEstimate$3201.15Shop/Dealer Price$3966.80 - $6259.56
2006 Dodge DakotaV8-4.7LService typeThrottle Body ReplacementEstimate$688.33Shop/Dealer Price$827.25 - $1236.50
1998 Dodge DakotaL4-2.5LService typeThrottle Body ReplacementEstimate$814.95Shop/Dealer Price$984.19 - $1487.41
1999 Dodge DakotaV8-5.9LService typeThrottle Body ReplacementEstimate$823.29Shop/Dealer Price$994.49 - $1503.87
2003 Dodge DakotaV8-5.9LService typeThrottle Body ReplacementEstimate$750.01Shop/Dealer Price$902.87 - $1357.28
Show example Dodge Dakota Throttle Body Replacement prices

What is the throttle body and how does it work?

The throttle body is an air metering device mounted between the air filter and snorkel, and the intake plenum. Within the throttle body is a movable throttle plate whose position controls the amount of air that enters the engine to determine engine speed. Throttle body designs vary. Some incorporate an idle air control valve, throttle position sensor, and other electronic throttle controls. The throttle plate in the throttle body can be controlled directly by an accelerator pedal cable or fully electronically in the newest drive-by-wire systems.

When to consider replacing the throttle body:

  • Check engine light and/or reduced power warning light is on. Most modern throttle bodies have electrical components, such as a throttle position sensor. These components are monitored by the powertrain control module (PCM). If the check engine light or reduced power warning light comes on, a mechanic will determine if any of the stored trouble codes implicate a throttle body malfunction.
  • Wrong idle speed. Carbon deposits in the throttle body, particularly around the movable throttle plate or in the idle air control valve, can cause the engine idle speed to be too low or too high.
  • Poor transmission shifting. In some applications, transmission shift timing relies on signal outputs from the throttle body. If the throttle position sensor is defective, that might adversely affect shift timing and feel.

How do mechanics replace the throttle body?

  • The engine cover is removed, if necessary.
  • The flexible rubber snorkel from the air filter housing to the throttle body is disconnected. Typically, the connection is made with a large stainless steel hose clamp.
  • The electrical connections to the throttle body are removed.
  • If the throttle body is not a drive-by-wire system, the accelerator cable and cruise control cable are disconnected and set aside.
  • The bolts retaining the throttle body to the plenum, the gasket, and the throttle body are removed. If the throttle body is being cleaned and tested for re-use, approved chemicals are used in the cleaning process.
  • The new or serviced throttle body is re-attached to the plenum and the bolts torqued to factory specifications.
  • All cables and electrical connections are restored. The intake air snorkel is reconnected.
  • If applicable, the electronic throttle installation and idle re-learn procedures are performed using an appropriate scan tool.
  • Finally, the engine is started, brought to normal operating temperature, and idle speed is checked. The car is road tested to ensure normal operation and no illumination of warning or service lights.

Is it safe to drive with a throttle body problem?

Yes. But, the vehicle may be limited in power or put into what is referred to as limp mode, in order to get the vehicle to a repair facility. If the check engine light is on, or the electronic throttle control warning light is on, but there is no noticeable difference in engine performance, the car can be safely driven. However, it is best to have it diagnosed and repaired at your earliest convenience to avoid unexpected breakdown or possible damage to the catalytic converter.

When replacing the throttle body keep in mind:

  • Many modern throttle bodies have spring loaded sensors and plastic gears that are not intended to be manipulated directly during any diagnostics or inspections. These components are controlled electronically or generate signals. It is best to let a mechanic use approved tests to diagnose the problem.
  • Wiring faults, bad grounds, or bad terminal connections can make it appear as though an electronically controlled throttle has failed. A mechanic will always rule out all other causes before replacing the throttle body.
  • When cleaning the throttle body, special care should be taken to use only special spray cleaners designed to not damage electrical components or sensors.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Dodge mechanics

Real customer reviews from Dodge owners like you.

Excellent Rating

(445)

Rating Summary
411
22
3
3
6
411
22
3
3
6

Chris

10 years of experience
31 reviews
Chris
10 years of experience
Dakota 2001 - Shock Absorber - Clearfield, UT
Chris was very friendly and professional

Pedro

7 years of experience
26 reviews
Pedro
7 years of experience
Dakota 1998 - Wheel Stud - Bakersfield, CA
Great worker

CURTIS

5 years of experience
8 reviews
CURTIS
5 years of experience
Dakota 2003 - AC Belt - Warrington, PA
great all around

Luis

3 years of experience
32 reviews
Luis
3 years of experience
Dakota 2003 - Battery - Richmond, VA
Very professional. Walked me thru recommendations for items that may need attention in the future. Awesome service.

Excellent Rating

(445)

Rating Summary
411
22
3
3
6
411
22
3
3
6
Number of Dodge Dakota services completed
4895+
services done by our mechanics
TOTAL NUMBER OF EXPERT Dodge MECHANICS
1400+
experts on our platform

Recent articles & questions

P0480 OBD-II Trouble Code: Cooling Fan 1 Control Circuit Malfunction
P0480 code definition P0480 is a general OBD2 trouble code that refers to the a malfunction within the cooling fan control circuit....
Symptoms of a Bad or Failing Steering Gear Adjuster Plug
Common signs include the steering wheel feeling loose or hard to turn, leaking power steering fluid, and the steering wheel shaking while driving.
How to Renew Your Car Registration in Indiana
In In order to be able to drive on Indiana roadways legally, you will have to get your car registered with the Bureau of Motor Vehicles. Every year, this registration will have to be renewed. The last thing that you...

How do I use the remote to lock and unlock the doors?

Your car’s Remote Entry system gives you the ability to lock and unlock your doors from outside (up to 33 feet away). That’s certainly convenient. Here’s what you need to know about locking and unlocking your car’s doors: To Unlock...

Long trip

Hi Pedro, This is a difficult question to answer because I am unable to determine the condition of your particular car. Generally speaking, a well maintained car that is operating properly should have absolutely no problem completing a 5 hour...

Abs light, Trac light, service vehicle light on, brake pedal sinks to floor hard to stop vehicle

During the service of these components, the brake hose bolted to the caliper is not required to be removed. If it was removed and the brake system was not bled properly, air trapped in the system can cause your symptoms....

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com