Dodge Colt Fuel Injector Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(23)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(23)

Fuel Injector Replacement Service

How much does a Fuel Injector Replacement cost?

On average, the cost for a Dodge Colt Fuel Injector Replacement is $519 with $424 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1987 Dodge ColtL4-2.0LService typeFuel Injector ReplacementEstimate$1899.05Shop/Dealer Price$2355.07 - $3700.61
1990 Dodge ColtL4-2.0LService typeFuel Injector ReplacementEstimate$947.17Shop/Dealer Price$1170.23 - $1816.88
1979 Dodge ColtL4-1.6LService typeFuel Injector ReplacementEstimate$1778.11Shop/Dealer Price$2208.91 - $3478.76
1986 Dodge ColtL4-1.6L TurboService typeFuel Injector ReplacementEstimate$942.95Shop/Dealer Price$1164.94 - $1808.40
1993 Dodge ColtL4-1.8LService typeFuel Injector ReplacementEstimate$1826.37Shop/Dealer Price$2269.25 - $3575.31
1981 Dodge ColtL4-1.4LService typeFuel Injector ReplacementEstimate$943.69Shop/Dealer Price$1165.88 - $1809.92
1992 Dodge ColtL4-1.5LService typeFuel Injector ReplacementEstimate$1942.97Shop/Dealer Price$2413.60 - $3803.24
1984 Dodge ColtL4-1.6LService typeFuel Injector ReplacementEstimate$1783.11Shop/Dealer Price$2214.14 - $3484.18
Show example Dodge Colt Fuel Injector Replacement prices

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

  • Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
  • Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
  • Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
  • Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

  • Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
  • The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
  • The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
  • The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
  • Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
  • The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
  • Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

  • Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
  • If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
  • Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
  • On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Dodge mechanics

Real customer reviews from Dodge owners like you.

Excellent Rating

(23)

Rating Summary
22
0
1
0
0
22
0
1
0
0

Robert

31 years of experience
641 reviews
Robert
31 years of experience
Dodge Colt L4-1.5L - Axle / CV Shaft Assembly Replacement (Passenger Side Front) - Hayward, California
He went above and beyond my expectations. He performed the job very well, fixing what I was unable to fix myself. I would defiantly recommend him to my friends and family and will defiantly have him work on my car again in the future.

Dameron

17 years of experience
171 reviews
Dameron
17 years of experience
Dodge Colt L4-1.5L - Oil Change - Indianapolis, Indiana
Great job!!! Car is running much better after the tune up. We thought we might have needed a new air filter, but after it was checked, he said it was still in good shape. Saved us about $30.00. Thank you!!

Pardeep

21 years of experience
1068 reviews
Pardeep
21 years of experience
Dodge Caravan V6-3.3L - Fuel Injector - San Jose, California
EXCELLENT! Pardeep was an hour early, very friendly, and thorough. He showed me the old yukky parts then showed me the installed new ones. He also gave me tips for a smoother smog. Thank you Pardeep! I look forward to booking you again. Definitely recommend

Tyler

27 years of experience
178 reviews
Tyler
27 years of experience
Dodge Charger V6-2.7L - Fuel Injector - Houston, Texas
great mechanic

Excellent Rating

(23)

Rating Summary
22
0
1
0
0
22
0
1
0
0
Number of Dodge Fuel Injector Replacement services completed
253+
services done by our mechanics
TOTAL NUMBER OF EXPERT Dodge MECHANICS
1400+
experts on our platform

Recent articles & questions

Insurance Requirements for Car Registration in Ohio
All All drivers in the state of Ohio are required to be financially responsible for the costs associated with an automobile accident, in order to operate a vehicle legally and maintain vehicle registration. The minimum financial responsibility requirements for Ohio...
P0531 OBD-II Trouble Code: A/C Refrigerant Pressure Sensor Circuit Performance
P0531 code means that there is too much or too little A/C refrigerant, high system pressure, faulty wiring, connectors, or cooling fans.
C1095 OBD-II Trouble Code: ABS Hydraulic Pump Motor Circuit Failure
Trouble code C1095 means the ABS hydraulic pump motor circuit has failed, often because of a damaged wheel speed sensor or wheel bearings.

What does the turn signal light mean?

There are lights that indicate the function of the Turn Signals located on the dashboard. The Turn Signal Light is displayed by two left and right arrows. To understand the Turn Signal Light. When the left or right turn signal...

I hear a knocking when stopping.

Hello! Weak steering and suspension components have a tendency to clunk and make a lot of noise as the vehicle shifts weight balance. This is accelerating, decelerating and going over bumps. Weak control arm bushings, worn brake pad hardware, and...

My car wont go pass 20-30mph whats my problem

Hi Robert. Thanks for contacting us today. Usually, when the car will not go past those speeds, it's because the ECU has detected some sort of fault or problem with the transmission or driveline components. This will activate a "limp...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com