Dodge Caravan Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(292)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(292)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Dodge Caravan Power Steering Pressure Hose Replacement is $203 with $63 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2002 Dodge CaravanV6-3.3LService typePower Steering Pressure Hose ReplacementEstimate$336.16Shop/Dealer Price$385.05 - $523.62
1991 Dodge CaravanL4-2.5LService typePower Steering Pressure Hose ReplacementEstimate$545.93Shop/Dealer Price$647.75 - $949.08
1998 Dodge CaravanV6-3.8LService typePower Steering Pressure Hose ReplacementEstimate$383.05Shop/Dealer Price$444.17 - $623.36
1994 Dodge CaravanElectricService typePower Steering Pressure Hose ReplacementEstimate$363.25Shop/Dealer Price$419.42 - $583.76
2006 Dodge CaravanL4-2.4LService typePower Steering Pressure Hose ReplacementEstimate$272.15Shop/Dealer Price$307.02 - $404.14
1995 Dodge CaravanV6-3.0LService typePower Steering Pressure Hose ReplacementEstimate$432.51Shop/Dealer Price$506.14 - $722.53
2005 Dodge CaravanV6-3.3LService typePower Steering Pressure Hose ReplacementEstimate$330.29Shop/Dealer Price$378.24 - $517.87
2007 Dodge CaravanL4-2.4LService typePower Steering Pressure Hose ReplacementEstimate$272.15Shop/Dealer Price$305.55 - $401.56
Show example Dodge Caravan Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Dodge mechanics

Real customer reviews from Dodge owners like you.

Excellent Rating

(292)

Rating Summary
269
13
0
1
9
269
13
0
1
9

Jason

33 years of experience
617 reviews
Jason
33 years of experience
Dodge Caravan V6-3.8L - Oxygen Sensor Replacement (Front/Upper/Upstream, Rear/Lower/Downstream) - Union City, California
Reliable, Honest and Highly efficient in quality repair services. Would highly recommend!

Kevo

313 years of experience
189 reviews
Kevo
313 years of experience
Dodge Caravan L4-2.4L - Car is not starting - Elk Grove, California

David

28 years of experience
182 reviews
David
28 years of experience
Dodge Caravan V6-3.3L - AC is not working - San Francisco, California

Andrew

12 years of experience
962 reviews
Andrew
12 years of experience
Dodge Caravan V6-3.3L - Starter - Kansas City, Missouri
Andrew did a fantastic job and was extremely timely. Communication was off the charts good and I never had to wonder what was going on. Would strongly recommend Andrew to anyone searching for a trustworthy mechanic.

Excellent Rating

(292)

Rating Summary
269
13
0
1
9
269
13
0
1
9
Number of Dodge Caravan services completed
3212+
services done by our mechanics
TOTAL NUMBER OF EXPERT Dodge MECHANICS
1400+
experts on our platform

Recent articles & questions

Is it Safe to Drive With a Mattress On Your Roof?
If If you bought a mattress at the local mattress store, you may be wondering how to transport it home. While some stores offer delivery, others do not. Tying a mattress to the roof of your car is an option,...
How to Pressure Test a Radiator Cap
Radiator caps are pressure tested using a cooling system pressure tester. This shows if the pressure in the cooling system is at a healthy level.
How to Renew Your Car Registration in Ohio
There There are a number of things that the citizens of Ohio will have to do to keep in compliance with its laws. When first moving to this state, you will have to make sure that you register your car...

Fuel door release open

Hey there. This is an electrical release mechanism, consisting of the switch in the glove compartment, and a solenoid that is inside the fuel door itself. Starting with the fuse for this circuit, follow the "power trail" to see which...

2012 toyota corolla green circle with an arrow half way on in the car not on dashboard

The light on your dash that looks like a green circle with an arrow at about the 10 O'clock position is the cruise control turned on light. Check to see if your cruise control is turned on.

Hey I recently got my oil changed and my car is making a knocking noise when I start it up

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com