Dodge B1500 Brake Pad Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(21)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(21)

Brake Pad Replacement Service

How much does a Brake Pad Replacement cost?

On average, the cost for a Dodge B1500 Brake Pad Replacement is $202 with $62 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1995 Dodge B1500V6-3.9LService typeBrake Pads - Front ReplacementEstimate$316.12Shop/Dealer Price$360.00 - $483.54
1998 Dodge B1500V8-5.2LService typeBrake Pads - Rear ReplacementEstimate$431.30Shop/Dealer Price$466.33 - $562.76
1997 Dodge B1500V6-3.9LService typeBrake Pads - Rear ReplacementEstimate$383.59Shop/Dealer Price$427.52 - $553.07
1996 Dodge B1500V6-3.9LService typeBrake Pads - Front ReplacementEstimate$307.11Shop/Dealer Price$349.25 - $471.48
1998 Dodge B1500V8-5.9LService typeBrake Pads - Front ReplacementEstimate$307.11Shop/Dealer Price$350.72 - $474.06
1998 Dodge B1500V8-5.2LService typeBrake Pads - Front ReplacementEstimate$307.11Shop/Dealer Price$349.39 - $471.73
1995 Dodge B1500V6-3.9LService typeBrake Pads - Rear ReplacementEstimate$383.59Shop/Dealer Price$427.55 - $553.10
1998 Dodge B1500V6-3.9LService typeBrake Pads - Rear ReplacementEstimate$431.30Shop/Dealer Price$466.38 - $562.85
Show example Dodge B1500 Brake Pad Replacement prices

What are brake pads and how do they work?

Brake pads consist of friction material that is bonded to a sturdy steel backing plate. When you push on the brake pedal, the friction material on the brake pads is forced against the inner and outer surfaces of the steel brake rotor under tremendous pressure. The resulting friction causes the wheels on your car to slow rapidly allowing for a quick, safe and controlled stop. After thousands of miles, this friction material eventually wears away, and the brake rotor wears away as well, requiring replacement.

Brakes-Service

When to replace brake pads?

Here are several indications that you need new brake pads:

  • Wear indicator on vehicle dashboard. When the friction material on the brake pads is worn to within 2 mm of the pad backing plate, replacement of the pads is necessary. Most newer cars today have electronics built into the brake pad. When the pad is at a point that it needs to be replaced, a symbol will appear on your vehicle dashboard’s instrument cluster. Consult your owner’s manual to learn what the symbol looks like.
  • High pitched squeal when braking. When the friction material on the pads is worn close to the backing plate, you may hear a squealing or squeaking noise as you drive regardless of whether you are applying the brakes or not. That squealing or squeaking noise is designed to make you aware that the brake pads are getting low and need to be inspected. If all of the friction material on the brake pad has been worn away, you will hear grinding and scraping noises when you apply the brakes. Pad replacement is mandatory at this point and the vehicle is unsafe to drive until corrected.
  • Brake pedal pulsation or vehicle vibration. Over time, brake rotors may develop excessive thickness variation (>.001 inches), excessive runout on the wheel hub (> .002 inches), or the brake rotor may warp due to high operating temperatures. If these defects exist, you may notice pulsation in the brake pedal or steering wheel during braking. New pads and rotor resurfacing or replacement will be required if the rotor has any of the above-mentioned deficiencies.
  • Vehicle pulling or wandering on braking. If your car pulls to the right or left during braking, that could be a sign of a sticking brake caliper, misalignment of the suspension, and sometimes tire defects or uneven tire inflation from side-to-side. The mechanic who inspects your vehicle will determine if new brake pads alone will resolve the issue or if other repairs are needed.
  • High mileage on existing pads. Regardless of whether any of the above brake system symptoms occur, every 10,000 miles a mechanic should measure the thickness of the remaining friction material on the brake pads and perform a thorough visual inspection of the braking system.
  • Brake system warning lights and/or maintenance reminder messages. Should your brake system warning light ever illuminates, or a brake system related maintenance reminder message appears in the driver information display, have your vehicle inspected and repaired as soon as possible.

How do mechanics replace brake pads?

Normally, pad replacement requires these steps:

  • Confirm the thickness of the remaining friction material on the brake pads. If the remaining friction material is less than 2 mm in thickness, pad replacement is warranted.
  • Visually inspect the brake rotor surface that contacts the pad (for scoring, pitting, grooves, rust) and measure the brake rotor with precision tools for thickness variation, run-out and warpage.
  • Inspect the caliper, torque plate, pads, and rotors to determine if the caliper is operating freely (i.e., inspect for stuck calipers).
  • Install new pads and any additional recommended components (e.g., rotors, if rotors depart from OEM specifications) only with customer approval of course.
  • Lubricate brake system components, such as caliper sliding pins, and inspect the condition of the brake fluid. Top off brake fluid as required.
  • Perform a basic 50 point safety inspection of your vehicle.
  • Finally, the mechanic will test drive your vehicle to confirm normal operation of the brake system.

Is it safe to drive with a brake pad problem?

Driving a vehicle with a known deficiency in the braking system is unsafe and consequently is not recommended. Worn out brake pads can increase stopping distances and so for your safety, it is always advised that worn out brake pads be replaced promptly. Further driving is not recommended and you should request service at your earliest convenience if any of the following circumstances exist: stopping distances are much greater than what you are accustomed to; the brake pedal is not firm or is low; there is loss of braking power assist; the vehicle pulls severely to one side on braking; or the brake system warning light is on.

If you detect unusual noises, such as squealing or grinding, but stopping distances are close to what you are used to, and the brake pedal is firm, and there are no warning lights, it may be safe to proceed to your destination but schedule service at your earliest convenience. When it comes to the brakes on your vehicle, always err on the side of caution and have a mechanic check your brake pads and braking system at the first indication of a problem.

When replacing brake pads keep in mind:

Brake pads must always be replaced as a set, that is both wheels (driver and passenger side) on an axle, front or rear, must be serviced. If brake pads on only one side of the car were replaced, your car might pull to one side when you apply the brakes. Often, resurfacing or replacement of the brake rotors is necessary and a competent mechanic will always measure for wear and damage to the brake rotors and advise you as to whether rotor replacement or re-surfacing is needed.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Dodge mechanics

Real customer reviews from Dodge owners like you.

Excellent Rating

(21)

Rating Summary
20
0
0
0
1
20
0
0
0
1

Raymond

28 years of experience
280 reviews
Raymond
28 years of experience
Dodge B1500 V6-3.9L - Ball Joint Front Replacement (Upper Right) - Apple Valley, California
Came on time and got the job done in a timely fashion.. great guy!!!

Joshua

28 years of experience
709 reviews
Joshua
28 years of experience
Dodge B1500 V8-5.2L - Door Latch Replacement (Passenger Side Front) - Oakland, California
He did exactly what was needed. He's timely and accurate.

Dellano

19 years of experience
554 reviews
Dellano
19 years of experience
Dodge B1500 V6-3.9L - Alternator - Rockville, Maryland
Very satisfied with the work. Dellanos knows what he is doing and is capable of doing it. Quite professional.

Chris

23 years of experience
2372 reviews
Chris
23 years of experience
Dodge B1500 V6-3.9L - Car is not starting - Lake Forest, California
Chris was great, super friendly and helpful and explained in detail what was wrong with my car... was even able to arrive early! He fixed the problem super quickly and recommended other issues on my car to address without “overselling”. He was very thorough and I felt like I totally got my money’s worth. I definitely recommend him!

Excellent Rating

(21)

Rating Summary
20
0
0
0
1
20
0
0
0
1
Number of Dodge B1500 services completed
231+
services done by our mechanics
TOTAL NUMBER OF EXPERT Dodge MECHANICS
1400+
experts on our platform

Recent articles & questions

P0647 OBD-II Trouble Code: A/C Clutch Relay Control Circuit High
P0647 means that the A/C clutch relay control circuit is malfunctioning due to a faulty control relay, compressor driver, damaged wiring components.
How Long Does a Positive Crankcase Ventilation (PCV) Valve Last?
Your Your car’s engine operates by mixing air with fuel and then burning it. This obviously creates waste gases. Most of those gases are routed out of the engine, through the exhaust and then out the muffler. However, that can’t...
5 Best Apps to Beat Traffic
For both iOS and Android, these 5 navigation apps will help you avoid traffic on your daily commute.

Replaced my engine. Does the new one need to be adjusted to the higher elevation?

Check all of the sensors and make sure that they are plugged in all the way. The computer system with the sensors are designed to adjust themselves as elevation changes. This is why all vehicles today have computers in them...

Car runs rough with AC on

It sounds like you may have a bad AC compressor or potentially a faulty MAP Sensor. When the AC compressor (https://www.yourmechanic.com/services/ac-compressor-replacement) is beginning to fail, this may incur an increased load on the motor as it works harder than usual...

emmissins test says i need oxygen sensor heater

Hello, thank you for writing in. The error message you got about the low threshold means the oxygen sensor has failed, the fuel system is off, or the catalytic converter is having issues. The amount of information available isn't enough...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com