Chrysler Town & Country Steering Rack/Gearbox Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(3)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(3)

Steering Rack/Gearbox Replacement Service

How much does a Steering Rack/Gearbox Replacement cost?

On average, the cost for a Chrysler Town & Country Steering Rack/Gearbox Replacement is $657 with $265 for parts and $392 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1996 Chrysler Town & CountryV6-3.8LService typeSteering Rack/Gearbox ReplacementEstimate$1281.80Shop/Dealer Price$1489.77 - $2087.76
2008 Chrysler Town & CountryV6-4.0LService typeSteering Rack/Gearbox ReplacementEstimate$1080.19Shop/Dealer Price$1253.18 - $1760.60
1997 Chrysler Town & CountryV6-3.3LService typeSteering Rack/Gearbox ReplacementEstimate$1252.97Shop/Dealer Price$1455.37 - $2049.18
2009 Chrysler Town & CountryV6-3.8LService typeSteering Rack/Gearbox ReplacementEstimate$1080.19Shop/Dealer Price$1253.25 - $1760.71
2010 Chrysler Town & CountryV6-3.3LService typeSteering Rack/Gearbox ReplacementEstimate$1080.19Shop/Dealer Price$1257.37 - $1767.93
1992 Chrysler Town & CountryV6-3.3LService typeSteering Rack/Gearbox ReplacementEstimate$1374.52Shop/Dealer Price$1587.06 - $2207.57
2016 Chrysler Town & CountryV6-3.6LService typeSteering Rack/Gearbox ReplacementEstimate$1142.69Shop/Dealer Price$1331.42 - $1885.79
2008 Chrysler Town & CountryV6-3.3LService typeSteering Rack/Gearbox ReplacementEstimate$1080.19Shop/Dealer Price$1253.25 - $1760.71
Show example Chrysler Town & Country Steering Rack/Gearbox Replacement prices

What is the Steering Rack/Gearbox all about?

A rack and pinion system uses several large components. This includes your main-shaft, universal joints, and an underlying intermediate shaft which immediately responds to all your steering wheel movements.

This rack and pinion system is designed to make your car’s steering easier to turn with the added help of a power assisted pump or motor. The typical car sold these days now weighs over 3000 pounds and larger vehicles like trucks and SUVs often weigh over 5000 pounds. The steering rack along with this power assist system are what allow you to easily move all that heavy mass between the steering wheel and your tires without so much as breaking a sweat.

Keep in mind:

The steering rack requires heavy and sometimes sophisticated equipment to operate properly. Many of the big and heavy parts that are underneath your vehicle, such as the shafts and universal joints, can gradually wear out over the course of time.

If you feel your steering is tight, chances are your rack is perfectly fine. It’s when your steering feels sloppy, or when you start seeing power steering fluid underneath your vehicle, that an inspection should be done. Also, keep in mind that damage to major suspension parts, such as your CV axles, ball joints, and tie rod ends, can make your steering feel loose and uneven.

This is why it’s a good idea to have your entire steering and suspension system inspected whenever you suspect that there is an issue with your steering.

How it's done:

  • The vehicle is raised and supported on jack stands
  • The tires are removed and tie rods and steering gear disconnected
  • The steering rack and gear box is replaced
  • The system is filled with new fluid, tires reinstalled
  • The vehicle is lowered off of the jack stands

Our recommendation:

If your steering starts to feel clunky or uneven, get it inspected at the earliest possible opportunity. Even a minor issue, such as a cracked seal in between major components, can leak power steering fluid onto your steering rack. This can lead lead to the deterioration or even the complete failure of your steering rack. It’s worth your time to contact one of our top-rated mechanics so that the quickest and most reasonable solution can be pursued for your steering system.

What common symptoms indicate you may need to replace the Steering Rack/Gearbox?

  • Sloppy or uneven steering that takes varying levels of effort.
  • Power steering fluid leaks that are usually at the rear of the engine bay or underneath your car.
  • A hard ‘clunk’ noise when you go over large bumps coupled with a feel of being disconnected to the steering wheel.

How important is this service?

Steering is one of those aspects of driving that you never want to shortchange. Often times, a small issue can be due to little more than a leaking power steering hose or a malfunctioning power steering pump. These both tend to be far less expensive repairs than a steering rack.

However, if your steering rack is in need of replacement the consequences of ignoring it can be dire. The worst accidents tend to happen due to the loss of control on a vehicle and your steering rack is the one component that enables your steering to remain precise. If your steering is giving you trouble, it’s important to address it promptly.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chrysler mechanics

Real customer reviews from Chrysler owners like you.

Excellent Rating

(3)

Rating Summary
2
0
1
0
0
2
0
1
0
0

Excellent Rating

(3)

Rating Summary
2
0
1
0
0
2
0
1
0
0
Number of Chrysler Town & Country Steering Rack/Gearbox Replacement services completed
33+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chrysler MECHANICS
1200+
experts on our platform

Recent articles & questions

P0338 OBD-II Trouble Code: Crankshaft Position Sensor A Circuit High Input
P0338 P0338 code definition The P0338 Trouble Code indicates an error with the crankshaft position sensor A circuit high input. What the P0338 code means The powertrain control module has found that the crankshaft position sensor (https://www.yourmechanic.com/services/crankshaft-position-sensor-replacement), or CPS, is...
How to Get Smog Technician Certified in Massachusetts
Automotive technician jobs include smog certified emissions inspectors. In Massachusetts, you must be hired and trained by Parsons to become one.
P0915 OBD-II Trouble Code: Gear Shift Position Circuit Range/Performance
P0915 means there is a limitation in the gearshift's ability to cover its full range due to corroded, damaged, disconnected, or broken wiring.

antifeeze to come out of the O2 sensor

Hello, thank you for writing in. When coolant leaks into the engine from a blown head gasket, cracked head, crank case, intake manifold, or simply dripping down the engine. If there is actual coolant dripping from the O2 sensor, and...

charge indicator light is on, alternator is charging fine and battery is good. what is the fault

The charging system light may be computer controlled on some vehicles or controlled by the instrument cluster circuit or the alternator output. We would need your vehicle year, make and model with engine size to give a better diagnosis for...

Y 2011 Mazda 6 is overheating I see a fluid in the back of the motor by the front of the battery and that's it and it is steaming

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com