Chrysler Pacifica Wheel Bearings Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(285)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(285)

Wheel Bearings Replacement Service

How much does a Wheel Bearings Replacement cost?

On average, the cost for a Chrysler Pacifica Wheel Bearings Replacement is $301 with $161 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2017 Chrysler PacificaV6-3.6LService typeWheel Bearings - Driver Side Rear ReplacementEstimate$716.32Shop/Dealer Price$860.25 - $1283.94
2006 Chrysler PacificaV6-3.8LService typeWheel Bearings - Driver Side Rear ReplacementEstimate$497.05Shop/Dealer Price$586.65 - $851.32
2007 Chrysler PacificaV6-3.8LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$499.83Shop/Dealer Price$590.15 - $856.92
2007 Chrysler PacificaV6-4.0LService typeWheel Bearings - Driver Side Rear ReplacementEstimate$499.83Shop/Dealer Price$590.15 - $856.92
2017 Chrysler PacificaV6-3.6LService typeWheel Bearings - Driver Side Front ReplacementEstimate$707.31Shop/Dealer Price$850.97 - $1274.46
2018 Chrysler PacificaV6-3.6L HybridService typeWheel Bearings - Driver Side Front ReplacementEstimate$721.91Shop/Dealer Price$864.44 - $1287.08
2018 Chrysler PacificaV6-3.6L HybridService typeWheel Bearings - Passenger Side Front ReplacementEstimate$721.91Shop/Dealer Price$864.30 - $1286.84
2008 Chrysler PacificaV6-4.0LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$467.81Shop/Dealer Price$550.12 - $792.88
Show example Chrysler Pacifica Wheel Bearings Replacement prices

What are wheel bearings and how do they work?

A wheel bearing assembly consists of rolling elements, such as hardened steel ball bearings or roller bearings, that roll on and around hardened steel bearing races. The wheel bearings support the front and rear axle, and all the weight of your car. Wheel bearings are made with a high-precision technique using extremely hard steel in order to withstand all the normal impacts that occur to the wheel and tire assembly as you drive along the road.

When to replace wheel bearings?

  • Growling or grinding noise from a wheel. Failed or failing wheel bearings make a very characteristic growling noise which will grow louder as the bearing wear progresses. If you believe the wheel bearing noise is coming from one side of the car, you can self-diagnosis your wheel bearing as you drive the car by loading and unloading vehicle weight You can do this by “swerving” from side-to-side. For example, if the noise markedly increases when you swerve to left, which shifts the vehicle’s weight to the right, then it often indicates the wheel bearing on the right is failing.

  • Axial or radial play in the wheel or wheel hub. Should the wheel hub move up and down or in and out, the bearing may be worn.

  • Vibration in the steering wheel or vehicle body and/or wandering. Vibration and lack of directional stability could be consequences of loose or worn out wheel bearings.

  • Tire and wheel assembly does not turn smoothly. With the wheel jacked up, and the car not in gear, the wheel should rotate smoothly. Rough or inconsistent movement, which is often accompanied by noise, can signify damaged bearings. Be sure the brakes are not dragging as you perform this check.

How do mechanics replace wheel bearings?

The complexity of wheel bearing replacement varies greatly depending on the vehicle make, model, year, the wheel position (front versus rear), and the drive type (AWD versus FWD):

  • On vehicles with unitized wheel bearing/hub assemblies, the brake rotor and caliper are removed.
  • The large axle nut is removed, the axle is pushed back through the center of the unitized hub assembly, and three (or more) bolts holding the hub assembly to the steering knuckle are removed.
  • The hub assembly is then removed from the knuckle. On installation of the new hub assembly to the knuckle, the bolts are torqued to the factory specification. In many cases, it is required to discard the old axle nut and replace with a new one. Special attention must be given to tightening the axle nut to the exact factory specification because over or under-tightening can damage the newly installed bearing. All YourMechanic professionals use calibrated torque wrenches on these critical fasteners.
  • Finally, the brake rotor and brake caliper are re-attached, the wheel installed and the car is road tested.
  • On vehicles where the wheel bearing is pressed into a cavity within the steering knuckle, the steering knuckle must be removed from the vehicle in order to press out the old bearing and press in the new bearing.
  • On some vehicles, the wheel bearing is pressed onto an axle shaft and thus the axle must be extracted from the axle carrier. This will apply to certain trucks.

Is it safe to drive with a wheel bearing problem?

No. Wheel bearing failure is usually gradual, although in some cases it starts immediately after the dramatic impact of the wheel and tire assembly with a deep pothole. Wheel bearings can sometimes make noise for quite some time before you experience a catastrophic failure that would result in complete separation of the wheel and tire assembly from the axle. Generally, the risk of sudden failure increases with the noise level. But strictly speaking, once the bearing has started to fail it is impossible to predict exactly when it will fail completely. So it should not continue to be driven. Were a failing bearing to seize or break while you are moving, you could experience loss of control of the vehicle. Once you receive a conclusive diagnostic that a wheel bearing has failed, replace the bearing promptly.

When replacing wheel bearings, keep in mind:

  • If the car has a substantial number of miles on the failed bearing (100,000 miles or more), it is a good idea to replace both bearings (driver and passenger) on the axle at the same time.
  • Wheel bearing noise can be confused with tire noise from defective tires. In difficult cases, a mechanic will apply remote wireless microphones at all 4 wheel positions, and then drive the car while listening to a remote receiver, switching between wheel positions to pinpoint the location of the failed bearing.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chrysler mechanics

Real customer reviews from Chrysler owners like you.

Excellent Rating

(285)

Rating Summary
256
17
3
3
6
256
17
3
3
6

Chris

10 years of experience
31 reviews
Chris
10 years of experience
Pacifica 2005 - Alternator - Ogden, UT
Very friendly and did a great job. If I need more work on my car in the future I would definitely use this service again.

Michael

20 years of experience
391 reviews
Michael
20 years of experience
Pacifica 2006 - Timing Belt - Mesa, AZ
Explained well and far is running better! Need a few more things done abs will use again for sure

Adam

16 years of experience
142 reviews
Adam
16 years of experience
Pacifica 2017 - Auxiliary Battery - Boca Raton, FL
Professional!

Ronnaldo

10 years of experience
37 reviews
Ronnaldo
10 years of experience
Pacifica 2006 - Coolant is leaking - Fairburn, GA
He was very courteous, respectful , knowledgeable, friendly, and helpful. Thanks,

Excellent Rating

(285)

Rating Summary
256
17
3
3
6
256
17
3
3
6
Number of Chrysler Pacifica services completed
3135+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chrysler MECHANICS
1200+
experts on our platform

Recent articles & questions

5 Best Ridesharing Apps
Get where you need to go with the short wait times and affordable prices of these amazing rideshare apps.
GMC Certified Pre-Owned (CPO) Car Program
Drivers Drivers in the market for a used GMC vehicle may want to check out cars under their certified pre-owned program. Many manufacturers have a certified pre-owned (CPO) program, and each one is set up differently. Read on to learn...
P008A OBD-II Trouble Code: Pressure Fuel System Pressure - Too Low
P008A means that fuel has entered into the system and sent a false signal due to a faulty fuel pressure sensor or problems with the fuel pump.

Keeps overheating and I've already got the radiator flushed and the replaced the thermostat

Hi, thanks for writing in. You will need to have the cooling fan clutch checked to see if it is working properly. The engine will not cool properly if the clutch is not locking enough as the engine gets hot....

When I start my car it and try to pull off it shakes and then cut off I was told it was the fuel pressure sensor which I replaced

You will need to have computer scanned for codes and supply the codes you get so I can help you better. The fuel system pressure sensor is an input for the fuel pump control module so it can control the...

It wont start

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com