Chrysler Dynasty Wheel Bearings Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(43)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(43)

Wheel Bearings Replacement Service

How much does a Wheel Bearings Replacement cost?

On average, the cost for a Chrysler Dynasty Wheel Bearings Replacement is $163 with $23 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1991 Chrysler DynastyV6-3.3LService typeWheel Bearings - Driver Side Rear ReplacementEstimate$681.98Shop/Dealer Price$817.33 - $1215.26
1993 Chrysler DynastyL4-2.5LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$367.27Shop/Dealer Price$424.42 - $591.76
1993 Chrysler DynastyL4-2.5LService typeWheel Bearings - Driver Side Front ReplacementEstimate$367.27Shop/Dealer Price$424.45 - $591.80
1991 Chrysler DynastyL4-2.5LService typeWheel Bearings - Driver Side Rear ReplacementEstimate$416.65Shop/Dealer Price$486.17 - $690.56
1990 Chrysler DynastyL4-2.5LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$416.65Shop/Dealer Price$487.65 - $693.14
1993 Chrysler DynastyV6-3.3LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$191.97Shop/Dealer Price$205.46 - $241.45
1990 Chrysler DynastyV6-3.3LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$672.97Shop/Dealer Price$806.59 - $1203.23
1990 Chrysler DynastyV6-3.3LService typeWheel Bearings - Driver Side Rear ReplacementEstimate$672.97Shop/Dealer Price$806.57 - $1203.20
Show example Chrysler Dynasty Wheel Bearings Replacement prices

What are wheel bearings and how do they work?

A wheel bearing assembly consists of rolling elements, such as hardened steel ball bearings or roller bearings, that roll on and around hardened steel bearing races. The wheel bearings support the front and rear axle, and all the weight of your car. Wheel bearings are made with a high-precision technique using extremely hard steel in order to withstand all the normal impacts that occur to the wheel and tire assembly as you drive along the road.

When to replace wheel bearings?

  • Growling or grinding noise from a wheel. Failed or failing wheel bearings make a very characteristic growling noise which will grow louder as the bearing wear progresses. If you believe the wheel bearing noise is coming from one side of the car, you can self-diagnosis your wheel bearing as you drive the car by loading and unloading vehicle weight You can do this by “swerving” from side-to-side. For example, if the noise markedly increases when you swerve to left, which shifts the vehicle’s weight to the right, then it often indicates the wheel bearing on the right is failing.

  • Axial or radial play in the wheel or wheel hub. Should the wheel hub move up and down or in and out, the bearing may be worn.

  • Vibration in the steering wheel or vehicle body and/or wandering. Vibration and lack of directional stability could be consequences of loose or worn out wheel bearings.

  • Tire and wheel assembly does not turn smoothly. With the wheel jacked up, and the car not in gear, the wheel should rotate smoothly. Rough or inconsistent movement, which is often accompanied by noise, can signify damaged bearings. Be sure the brakes are not dragging as you perform this check.

How do mechanics replace wheel bearings?

The complexity of wheel bearing replacement varies greatly depending on the vehicle make, model, year, the wheel position (front versus rear), and the drive type (AWD versus FWD):

  • On vehicles with unitized wheel bearing/hub assemblies, the brake rotor and caliper are removed.
  • The large axle nut is removed, the axle is pushed back through the center of the unitized hub assembly, and three (or more) bolts holding the hub assembly to the steering knuckle are removed.
  • The hub assembly is then removed from the knuckle. On installation of the new hub assembly to the knuckle, the bolts are torqued to the factory specification. In many cases, it is required to discard the old axle nut and replace with a new one. Special attention must be given to tightening the axle nut to the exact factory specification because over or under-tightening can damage the newly installed bearing. All YourMechanic professionals use calibrated torque wrenches on these critical fasteners.
  • Finally, the brake rotor and brake caliper are re-attached, the wheel installed and the car is road tested.
  • On vehicles where the wheel bearing is pressed into a cavity within the steering knuckle, the steering knuckle must be removed from the vehicle in order to press out the old bearing and press in the new bearing.
  • On some vehicles, the wheel bearing is pressed onto an axle shaft and thus the axle must be extracted from the axle carrier. This will apply to certain trucks.

Is it safe to drive with a wheel bearing problem?

No. Wheel bearing failure is usually gradual, although in some cases it starts immediately after the dramatic impact of the wheel and tire assembly with a deep pothole. Wheel bearings can sometimes make noise for quite some time before you experience a catastrophic failure that would result in complete separation of the wheel and tire assembly from the axle. Generally, the risk of sudden failure increases with the noise level. But strictly speaking, once the bearing has started to fail it is impossible to predict exactly when it will fail completely. So it should not continue to be driven. Were a failing bearing to seize or break while you are moving, you could experience loss of control of the vehicle. Once you receive a conclusive diagnostic that a wheel bearing has failed, replace the bearing promptly.

When replacing wheel bearings, keep in mind:

  • If the car has a substantial number of miles on the failed bearing (100,000 miles or more), it is a good idea to replace both bearings (driver and passenger) on the axle at the same time.
  • Wheel bearing noise can be confused with tire noise from defective tires. In difficult cases, a mechanic will apply remote wireless microphones at all 4 wheel positions, and then drive the car while listening to a remote receiver, switching between wheel positions to pinpoint the location of the failed bearing.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chrysler mechanics

Real customer reviews from Chrysler owners like you.

Excellent Rating

(43)

Rating Summary
42
1
0
0
0
42
1
0
0
0

Robert

21 years of experience
1307 reviews
Robert
21 years of experience
Chrysler Dynasty V6-3.3L - Oil Pan - Broomfield, Colorado
He is very down to earth and willing to do whatever it takes to get the job done. I'm very greatful for all the hard work he put in on such a cold day.

Joe

44 years of experience
838 reviews
Joe
44 years of experience
Chrysler Town & Country V6-3.3L - Wheel Bearings Replacement (Driver Side Front, Passenger Side Front) - Largo, Florida
My experience with Joe and Your Mechanic was nothing but positive. From my first encounter I believed that this company understood customer service. Great communication, showed up on time, did what he said he would do and gave a quote on some other issues I needed to have done. A mechanic that comes to your house FOR LESS than a garage? Why would I use anyone else?

Jerome

25 years of experience
415 reviews
Jerome
25 years of experience
Chrysler 200 V6-3.6L - Wheel Bearings Replacement (Passenger Side Front) - Baltimore, Maryland
Was very late

Joshua

17 years of experience
38 reviews
Joshua
17 years of experience
Chrysler Sebring L4-2.4L - Wheel Bearings Replacement (Driver Side Front, Passenger Side Front) - Dayton, Ohio
He was friendly and professional . The work was done faster than expected and my car is so much better now

Excellent Rating

(43)

Rating Summary
42
1
0
0
0
42
1
0
0
0
Number of Chrysler Wheel Bearings Replacement services completed
473+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chrysler MECHANICS
1200+
experts on our platform

Recent articles & questions

P2705 OBD-II Trouble Code: Transmission Friction Element F Apply Time Range/Performance
P2705 means there is a malfunction in the transmissions friction elements due to failing transmission components, low fluid level or electrical issues
How to Keep Your Car Smelling Fresh
You You love that fresh new-car smell, but sadly, it only lasts for a little while. But don’t worry! You can keep your car smelling good all year round and avoid unpleasant odors (https://www.yourmechanic.com/article/how-to-remove-odors-from-your-car) if you follow a few easy-to-do...
The Guide to Right-of-Way Laws in Georgia
Traffic Traffic laws exist to keep you safe. If you fail to obey them, then you could end up in a crash that could damage or total your vehicle, and cause serious injuries or even death. Most traffic accidents occur...

Air not working after alternator repair

There is a chance that the electrical connector that goes to your AC compressor may have gotten disconnected while the alternator was being worked on; it is in close proximity to the alternator and may have been bumped. I would...

My car has a hard time starting and when it finally does it shakes violently then dies.

Hello there, many different faults can cause your 2002 Ford Focus to start then die. The most common causes would be a vacuum leak, faulty oxygen sensor (https://www.yourmechanic.com/services/oxygen-sensor-replacement), exhaust leak, alternator (https://www.yourmechanic.com/services/alternator-replacement), battery cable (https://www.yourmechanic.com/services/battery-cable-replacement), wiring harness fault, fuel pump...

Stick shift has absolutely no pressure. Feels like there are no gears at all.

Hello, thanks for writing in. If there is no pressure on the clutch pedal, then most of the time it is caused by an issue with the clutch hydraulics. Most of the time it is caused by a bad clutch...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com