Chrysler Aspen Exhaust Gas Recirculation/EGR Valve Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(94)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(94)

Exhaust Gas Recirculation/EGR Valve Replacement Service

How much does a Exhaust Gas Recirculation/EGR Valve Replacement cost?

On average, the cost for a Chrysler Aspen Exhaust Gas Recirculation/EGR Valve Replacement is $228 with $88 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2008 Chrysler AspenV8-5.7LService typeExhaust Gas Recirculation/EGR Valve ReplacementEstimate$611.22Shop/Dealer Price$728.88 - $1073.74
2009 Chrysler AspenV8-5.7L HybridService typeExhaust Gas Recirculation/EGR Valve ReplacementEstimate$1360.79Shop/Dealer Price$1666.32 - $2578.80
2008 Chrysler AspenV8-4.7LService typeExhaust Gas Recirculation/EGR Valve ReplacementEstimate$421.37Shop/Dealer Price$492.07 - $700.00
2007 Chrysler AspenV8-4.7LService typeExhaust Gas Recirculation/EGR Valve ReplacementEstimate$321.95Shop/Dealer Price$367.80 - $501.16
2007 Chrysler AspenV8-5.7LService typeExhaust Gas Recirculation/EGR Valve ReplacementEstimate$602.21Shop/Dealer Price$719.60 - $1064.26
2009 Chrysler AspenV8-4.7LService typeExhaust Gas Recirculation/EGR Valve ReplacementEstimate$421.37Shop/Dealer Price$492.21 - $700.25
2009 Chrysler AspenV8-5.7LService typeExhaust Gas Recirculation/EGR Valve ReplacementEstimate$1360.79Shop/Dealer Price$1666.36 - $2578.87
Show example Chrysler Aspen Exhaust Gas Recirculation/EGR Valve Replacement prices

What is the Exhaust Gas Recirculation/EGR Valve all about?

The EGR (Exhaust Gas Recirculation) valve helps lower the car’s exhaust emissions (gases from the tailpipe). It recirculates the portion of the gasses coming out of the engine by putting in back into the intake manifold, where the engine can burn it again, thereby reducing the emissions.

The EGR valve is located in the engine compartment (underneath the hood). Most engines require exhaust gas recirculation to meet emissions standards. If the EGR valve has gone bad, the car will not pass emissions.

Exhaust Gas Recirculation Valve

Keep in mind:

During the EGR valve replacement, your mechanic should also inspect the vacuum hoses connected to the EGR valve. If the vacuum hoses are cracked (leaking), the EGR valve will not function properly.

How it's done:

  • Scan the computer system in the car.
  • Check all vacuum related hoses to EGR valve.
  • Test EGR transducer.
  • Verify the EGR port is not plugged.
  • Remove and replace the EGR valve.
  • Clean the carbon deposit on EGR pintle.
  • Clear the trouble codes and test for proper operation of EGR valve.

Our recommendation:

It is a good idea to get an air induction (carbon cleaning) service performed every 50,000 miles. This will clean out any sludge or carbon build up in the air intake system. Always keep up with regular oil changes; it will help prevent sludge build up in the engine.

What common symptoms indicate you may need to replace the Exhaust Gas Recirculation/EGR Valve?

  • Check Engine light is on.
  • Possible loss of power.
  • Car will not run smoothly (shake, stumble, may stall).

How important is this service?

The EGR valve helps your vehicle recycle gas. The EGR valve is responsible for taking the gas that comes out of the engine, and sending it through the intake manifold, where the engine can utilize it again. Without the EGR valve your vehicle will not recycle and reuse any of its gas, which increases the emissions. Without the EGR, your car will not pass an emission inspection.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chrysler mechanics

Real customer reviews from Chrysler owners like you.

Excellent Rating

(94)

Rating Summary
83
3
1
2
5
83
3
1
2
5

Christopher

19 years of experience
58 reviews
Christopher
19 years of experience
Chrysler Aspen V8-5.7L - Water Pump - Humble, Texas
Outstanding job

Claud

9 years of experience
640 reviews
Claud
9 years of experience
Chrysler Aspen V8-4.7L - Alternator - Detroit, Michigan
Great job. Professional

Steven

22 years of experience
200 reviews
Steven
22 years of experience
Chrysler Aspen V8-5.7L - Valve Cover Gasket Replacement - Weatherford, Texas
Steven was very attentive, new what the job was. Did a great job. So good, l set up another appointment.

Justin

9 years of experience
372 reviews
Justin
9 years of experience
Chrysler Aspen V8-4.7L - Alternator - Pompano Beach, Florida
Justin was GREAT! Thank you!

Excellent Rating

(94)

Rating Summary
83
3
1
2
5
83
3
1
2
5
Number of Chrysler Aspen services completed
1034+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chrysler MECHANICS
1200+
experts on our platform

Recent articles & questions

How Often Does My Car Need New Transfer Case Fluid?
A transfer case is a part of a drivetrain system. Its primary function is to engage the axles of multi-axle vehicles....
10 Best Car Top Carriers for Roof Top Cargo & Storage
Storing equipment on the your car roof is a great way to optimize the space in your car. Thule's Sidekick box can carry up to 110 pounds of cargo.
Is It Safe to Drive With the DPF Light On?
Diesel particulate filters are intended to reduce soot emissions by as much as 80%. When the filter fails, the DPF (diesel particulate filter)...

Mechanic told me that the P1125 cod meant that one of 2 transmission sensors had gone bad on my 2002 Toyota Echo. He does not know

After checking the manual for the code P1125 I have found that this code is not listed for this vehicle. Can you verify the code and the vehicle information so we can help you better. i would not recommend not...

2005 Ford Escape v6. A/c compressor was bad (took apart and noticed the bearing were failing). So I replaced compressor with brand new one. Added 4oz of oil and also added new refrigerant. But now I can not get the clutch to engage nor the radiator fans. I have checked fuses and also replaced 3 relays just to be sure that was not it. [Engine](/topics-engine-ford/) starts to smoke some. Before this situation there was a Freon leak somewhere (i was assuming the bad compressor). And the heat stopped working properly about a year again. I drained the [coolant](/topics-coolant-ford/) and tried flushing the system. Not much came out and still no good amount of heat unless the car was accelerating. My next step was to replace the [thermostat](/topics-thermostat-ford/) switch, but was curious if I may be missing something else?

Can i take the ignition switch module and cylinder off of a 1999 gmc seirra and it work in my 1996 chevy s10

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com