Chevrolet V3500 Car Thermostat Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(298)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(298)

Car Thermostat Replacement Service

How much does a Car Thermostat Replacement cost?

On average, the cost for a Chevrolet V3500 Car Thermostat Replacement is $208 with $68 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1990 Chevrolet V3500V8-6.2L DieselService typeCar Thermostat ReplacementEstimate$433.82Shop/Dealer Price$507.13 - $718.94
1991 Chevrolet V3500V8-6.2L DieselService typeCar Thermostat ReplacementEstimate$424.81Shop/Dealer Price$496.35 - $706.84
1991 Chevrolet V3500V8-7.4LService typeCar Thermostat ReplacementEstimate$309.55Shop/Dealer Price$352.30 - $476.36
1990 Chevrolet V3500V8-7.4LService typeCar Thermostat ReplacementEstimate$314.97Shop/Dealer Price$359.07 - $487.20
1990 Chevrolet V3500V8-5.7LService typeCar Thermostat ReplacementEstimate$314.97Shop/Dealer Price$360.55 - $489.78
1991 Chevrolet V3500V8-5.7LService typeCar Thermostat ReplacementEstimate$313.73Shop/Dealer Price$357.66 - $484.97
Show example Chevrolet V3500 Car Thermostat Replacement prices

What is an engine cooling system thermostat and how does it work?

The car's engine cooling system thermostat is a small valve within a cooling system passageway that opens and closes in response to the temperature of the circulating engine coolant. When your car is first started and the coolant is cold, the valve in the thermostat will be in the closed position, circulating the coolant flow only within the engine instead of flowing to the radiator, which allows the engine to warm up fast, promoting fuel efficiency, low emissions, and reduced engine deposits. Once the engine coolant reaches the design temperature, usually around 195 degrees, the valve will open and close as you drive in order to maintain a coolant temperature typically between 195 to 225 degrees Fahrenheit.

Thermostat

When to consider replacing the engine cooling system thermostat:

  • Engine overheats. A thermostat with the valve stuck closed is a common cause of engine overheating. However, since there are other causes of overheating, a mechanic will thoroughly inspect the cooling system prior to condemning the thermostat. Since it is usually not known how badly the engine overheated, the mechanic will also try to determine if there is evidence that the cylinder head gasket was blown. If so, it would be repaired prior to replacing the thermostat.
  • Temperature gauge reads too low or too high. Thermostats can get sticky, causing the engine temperature to stray from the optimal range. Your dash-mounted temperature gauge will notify you of this malfunction.
  • Cooling system repairs. All thermostats eventually fail. Therefore, if the cooling system is already open for major repairs, such as water pump or radiator replacement, it is recommended to install a new thermostat simply as insurance against future breakdown.

How do mechanics replace the engine cooling system thermostat?

  • Once the engine is completely cold, the radiator cap is loosened and enough coolant is drained from the radiator so the coolant level is below the thermostat housing.
  • The thermostat housing is removed and the thermostat and gasket are extracted. Note that some cars have more than one cooling system thermostat and both might need replacement.
  • All mounting surfaces on the thermostat housing are cleaned of old gasket material. A new gasket is applied and the thermostat is re-installed in the correct orientation and with the temperature sensing cylinder facing downward towards the engine.
  • The thermostat housing bolts are tightened to original equipment manufacturer (OEM) specifications using a calibrated inch-pound torque wrench.
  • The cooling system is refilled with the appropriate coolant type and the system is fully bled of all air.
  • The car engine is run until the normal operating temperature is reached, and while taking precautions with the hot coolant, the coolant level is rechecked while confirming there is flow through the radiator — either visually or with an infrared temperature gun. This will confirm the thermostat is open. Finally, the engine is checked for leaks.

Is it safe to drive with an engine cooling system thermostat problem?

No. If it has been determined that there is a thermostat problem, it should be repaired right away. Failure to do so can cause substantial and costly damage to the engine.

When replacing the engine cooling system thermostat keep in mind:

  • Engine overheating due to causes other than a faulty thermostat, will themselves damage a thermostat. Therefore, always replace the thermostat if the engine overheats, even if the thermostat was not the initial cause of the overheating.
  • The thermostat should be replaced anytime you have major work done on the coolant system. It is convenient and costs little during such repairs and insurance against future breakdown.
  • OEM thermostats are the best ones to use and you can request your mechanic to install only the OEM thermostat. Dealer supplied, OEM thermostats are sometimes more costly but are generally higher quality and specifically engineered for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(298)

Rating Summary
284
5
2
1
6
284
5
2
1
6

Albin

7 years of experience
17 reviews
Albin
7 years of experience
Chevrolet Impala V6-3.5L - Thermostat - Brooklyn, New York
Albin bent over backwards to provide multiple major services in a day, and did so with expert care and efficiency (and all at my convenience). He’s an honest mechanic, which is notoriously hard to come by, so I’m glad YourMechanic introduced me to someone I would recommend so highly. Hire Albin; you won’t be disappointed.

Jordan

10 years of experience
59 reviews
Jordan
10 years of experience
Chevrolet Colorado L5-3.5L - Thermostat - Austin, Texas
On time. Got the job done.

Richard

22 years of experience
461 reviews
Richard
22 years of experience
Chevrolet Cruze L4-1.8L - Thermostat - Mableton, Georgia
Got here at 4, time was between 3-4, no biggie though I know they come from other jobs. Got the job done in about 25 minutes. Seemed knowledgeable about what he was doing. I was expecting the job to take longer, as I was quoted for labor by other places for about 2-2.5 hours of labor. I'd highly suggest Richard to anyone needing some work done.

Robert

38 years of experience
237 reviews
Robert
38 years of experience
Chevrolet C10 V8-5.7L - Thermostat - Atlanta, Georgia
Robert does excellent work and is extremely knowledgeable and compedent.

Excellent Rating

(298)

Rating Summary
284
5
2
1
6
284
5
2
1
6
Number of Chevrolet Car Thermostat Replacement services completed
3278+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1700+
experts on our platform

Recent articles & questions

What Does the Oil Pressure Warning Light Mean?
The oil pressure light warns you when the oil pressure in your car is getting low, due to either a pump malfunction or low oil level in the engine.
How Do Rotor Engines Differ From Regular Engines?
Rotary engines use three-sided rotors inside an oblong housing instead of pistons. Rotary engines create lots of horsepower, but aren't as efficient.
P0608 OBD-II Trouble Code: Control Module VSS Output "A" Malfunction
P0608 means there is an malfunction in the vehicle speed sensor A control module often due too faulty speed sensor or shorted electrical wiring.

I need help locating my starter

Replacing the starter can be a bit of a tricky job as it is located usually down on the driver's side of the motor underneath the exhaust manifold on the side of the engine block. It is mounted very close...

It's like I don't have a clutch, more or less there's too much pedal.

Hello - first task is to check the fluid level in your clutch fluid reservoir. This reservoir may be shared with the brake master cylinder - they both use brake fluid. If the fluid level is correct, it sounds like...

Acts like there is a surging of the engine when I accerate 02 6cyl Altima even in park and nutral.very slow to get up to speed

If the check engine light is on then you will have a stored code in one of the computers in the car. It will store a code anytime the light is on. You may have a problem with the fuel...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com