Chevrolet Trax Loud noise when using the clutch Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(38)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(38)

Loud noise when using the clutch Inspection Service

How much does a Loud noise when using the clutch Inspection cost?

On average, the cost for a Chevrolet Trax Loud noise when using the clutch Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2013 Chevrolet TraxL4-1.4L TurboService typeLoud noise when using the clutch InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2016 Chevrolet TraxL4-1.4L TurboService typeLoud noise when using the clutch InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2020 Chevrolet TraxL4-1.4L TurboService typeLoud noise when using the clutch InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2017 Chevrolet TraxL4-1.4L TurboService typeLoud noise when using the clutch InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2021 Chevrolet TraxL4-1.4L TurboService typeLoud noise when using the clutch InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2018 Chevrolet TraxL4-1.4L TurboService typeLoud noise when using the clutch InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2022 Chevrolet TraxL4-1.4L TurboService typeLoud noise when using the clutch InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
2014 Chevrolet TraxL4-1.4L TurboService typeLoud noise when using the clutch InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Chevrolet Trax Loud noise when using the clutch Inspection prices

Driving a car with a manual transmission can be a lot of fun. It’s perhaps the most engaged type of driving – connecting you with the car in a very visceral way. However, drivers with manual transmissions face problems that rarely occur for drivers who have an automatic. Clutch wear and tear is one of those (all clutches wear out, and automatic transmissions use them too, but the incidence of wear is less). If you’ve noticed a loud noise when using the clutch, there’s definitely a problem, but it could be one of several different things.

How this system works:

While manual transmissions have become more advanced in the last couple of decades, they’re still simpler to understand than automatics. One of the most easily understood aspects here is how the clutch works. It’s all about friction – and it’s pretty similar to the way your brakes work, too.

When you press the clutch pedal, it engages the clutch to allow you to shift gears. The clutch presses against the flywheel, and the friction material on the clutch stops the transmission from spinning. When you let off the pedal, the clutch disengages, and the transmission is free to spin with the engine.

Operating the clutch requires having working bearings – this applies to both engaging (pressing the pedal in) and disengaging (letting off on the pedal). There are several bearings here as well, including the throw out bearing and pilot bearing.

Common reasons for this to happen:

  • Worn Throw Out Bearing: If you notice the noise from your clutch when you release the pedal, chances are good that the throw out bearing is failing and will need to be replaced.

  • Worn Pilot Bearing: If you notice noise when you press the clutch pedal in, the most likely culprit is the pilot bearing, which will need to be replaced.

  • Worn Release Bearing: Another possible cause of noise when pressing the clutch pedal in is the release bearing. If it’s making noise, then the bearing is failing and will need to be replaced.

  • Worn Clutch: It’s also possible that the clutch itself is worn and will need to be replaced. These are high wear components and need to be replaced on a regular basis. However, the frequency of replacement will depend on your driving style and habits. When replacing the clutch, it may also be necessary to have the flywheel resurfaced.

  • Worn Input Bearing: If the noise happens when the car is in neutral and you are not using the clutch at all, the most likely cause is the input bearing, which is located inside the transmission.

What to expect:

A top-rated mobile mechanic will come to your home or office to inspect the clutch and transmission operation and verify the problem. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

One of our mechanics will inspect your clutch operation in order to verify the noise and determine the correct course of action. A test drive may be necessary to duplicate the noise. Once the mechanic has ascertained the cause of the problem, a repair can be made.

How important is this service?

If your clutch is making noise during use, it’s more than just an embarrassing annoyance. It’s a sign that there’s something going wrong. The most common problems to fit these symptoms are failed bearings (pilot, throw out and release), but a worn clutch can also cause similar issues. One of our professional mechanics can determine the actual cause of your problem and repair your clutch so you can get back on the road and enjoy peace of mind.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(38)

Rating Summary
36
2
0
0
0
36
2
0
0
0

Jordan

8 years of experience
87 reviews
Jordan
8 years of experience
Chevrolet Trax L4-1.4L Turbo - Windshield Wiper/Washer System Inspection - Citrus Ridge, Florida
Jordan was so friendly, professional and didn't mind all my questions. He was on time and did a great inspection. For my repair it does require ordering a part, so I will see Jordan again. I highly recommend Jordan and the company. Thank you Jordan!

Jeffrey

16 years of experience
100 reviews
Jeffrey
16 years of experience
Chevrolet Trax L4-1.4L Turbo - Water Pump - Tampa, Florida
Jeff is very prompt and takes his time to complete the job. Was in no rush and ensured that the job was completed to satisfaction. When i asked a few questions, he had very clear explanations. I would recommend him for any car repair work.

Shaun

10 years of experience
542 reviews
Shaun
10 years of experience
Chevrolet Trax L4-1.4L Turbo - Oil Change - Phoenix, Arizona
Very patient and polite

Claud

8 years of experience
482 reviews
Claud
8 years of experience
Chevrolet Trax L4-1.4L Turbo - Air Bleed Housing Assembly - Grosse Pointe, Michigan
Claud is an outstanding professional, and he has made getting my car fixed a more pleasant experience. Who wants to be without a car? No one, but Claud makes that time bearable.

Excellent Rating

(38)

Rating Summary
36
2
0
0
0
36
2
0
0
0
Number of Chevrolet Trax services completed
418+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1600+
experts on our platform

Recent articles & questions

How a Manual Transmission Works
A A manual transmission helps a vehicle achieve a desired speed through the use of gears, a clutch, and a shifter. It works like this: when the driver wants to shift gears, he or she pushes in the clutch pedal...
Symptoms of a Bad or Failing Canister Purge Solenoid
Common signs of a problem with a car EVAP canister purge solenoid include rough idle, difficulty starting, and the Check Engine Light turning on.
How Long Does a Key Fob Battery Last?
In order to get into a modern car, you will usually have to have the key fob that comes...

Fuel pump is not coming on when try to start the vehicle.

Hello there, thank you for asking about your 2007 Chevrolet Cobalt. If you jump the fuel pump relay and still do not get fuel pressure, then you may have wired the fuel pump in backwards. The pump may be running...

I just bought a 05 Impala v6 automatic. It's very used, and when I first started driving it, I did notice that the shifting felt like it was slipping. Also, the gear shirt bar that moves the lever is in bad shape. It was having a difficult time getting into 4th gear on the freeway drive home, so I used cruise control, thinking that would take some pressure off of the transmission. I don't know if that's relevant, just saying everything. I got off the freeway and stopped at a light . The car wouldn't move. I tried push starting it in neutral like you would a manual, apparently autos don't do that ( I really really hate auto trans and I don't know anything about them as a result). Then I turned the car off and started it up again. It drove for about 1/16 of a mile at about 4000 RPMs. I did that about 5 times til I just got home. I do have a quart of trans fluid and I was going to try flushing that, but it doesn't seem as simple as just slipping.

I have a 2000 volkswagon jetta 2.0L. It will start fine, as I drive i feel the engine kinda losing power. Then I start to slow down or come to a stop sign or red light and it dies. It will crank but won't turn over. I let it sit for about 30 minutes and it will start right back up. I already replaced the camshaft sensor and no change. The stalling is getting more frequent with longer wait times before I can start it again

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com