Chevrolet Suburban 1500 Serpentine/Drive Belt Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(11)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(11)

Serpentine/Drive Belt Replacement Service

How much does a Serpentine/Drive Belt Replacement cost?

On average, the cost for a Chevrolet Suburban 1500 Serpentine/Drive Belt Replacement is $174 with $34 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2008 Chevrolet Suburban 1500V8-6.0LService typeSerpentine/Drive Belt ReplacementEstimate$226.08Shop/Dealer Price$247.45 - $303.46
2009 Chevrolet Suburban 1500V8-6.0LService typeSerpentine/Drive Belt ReplacementEstimate$214.59Shop/Dealer Price$233.57 - $286.40
2003 Chevrolet Suburban 1500V8-5.3LService typeSerpentine/Drive Belt ReplacementEstimate$453.17Shop/Dealer Price$531.82 - $763.60
2006 Chevrolet Suburban 1500V8-6.0LService typeSerpentine/Drive Belt ReplacementEstimate$453.17Shop/Dealer Price$531.82 - $763.60
2004 Chevrolet Suburban 1500V8-5.3LService typeSerpentine/Drive Belt ReplacementEstimate$453.17Shop/Dealer Price$533.30 - $766.18
2002 Chevrolet Suburban 1500V8-5.3LService typeSerpentine/Drive Belt ReplacementEstimate$453.17Shop/Dealer Price$531.96 - $763.85
2014 Chevrolet Suburban 1500V8-5.3LService typeSerpentine/Drive Belt ReplacementEstimate$214.59Shop/Dealer Price$233.61 - $286.47
2005 Chevrolet Suburban 1500V8-5.3LService typeSerpentine/Drive Belt ReplacementEstimate$453.17Shop/Dealer Price$531.82 - $763.60
Show example Chevrolet Suburban 1500 Serpentine/Drive Belt Replacement prices

What is a serpentine belt and how does it work?

A serpentine belt is a relatively long, flat, multi-ribbed belt that is driven by the engine’s crankshaft pulley. The belt drives many, and often all, of the engine accessories such as the alternator, air conditioning compressor, power steering pump, water pump, and air pump. The serpentine belt is tensioned by a hydraulic or spring-loaded automatic tensioner. Some older cars use a serpentine belt to drive most accessories but will also have a shorter v-style belt to drive, for example, the power steering pump.

Belts

When to consider replacing the serpentine belt:

  • Regularly scheduled maintenance. Typically, belt manufacturers recommend belt replacement at 90,000 miles. However, the belt must be inspected for wear or damage at regular intervals prior to this high mileage.
  • Squealing noise, belt slippage, visible belt damage. Should the belt fail or wear out prematurely, you may hear noise or you may see visible signs of deterioration such as missing chunks of rubber, excessive cracking, or a shredded appearance on the edge of the belt.
  • Battery Light. A loose belt, perhaps caused by a defective tensioner, may not drive the alternator at adequate speed and thus the battery may discharge, causing the warning light to illuminate.
  • Engine overheating. Often, the serpentine belt drives the water pump. In those applications, if the belt breaks the engine will overheat in seconds to minutes. If the belt is inadequately tensioned, you may notice higher-than-normal engine operating temperature.

How do mechanics replace the serpentine belt?

  • Prior to removing the belt, the mechanic must run the engine to determine if the idler pulley and the belt tensioner are noise-free. Those rotating components have grease filled bearings and are subject to wear. In addition, the mechanic will ensure that all pulleys and accessories are turning in the same plane. These steps help make sure your new belt will operate trouble-free for its full-service life.
  • The belt’s routing path through the various components is noted. The belt tensioner is released, usually with a wrench or lever, to release the tension from the belt. With the tension off, the belt slides off the pulleys.
  • All rotating components — that is the alternator, air conditioner compressor, etc. — are checked for smooth operation and no noise.
  • If everything checks out, the new belt is slipped over all of the pulleys while holding the tensioner away from the belt. Once the belt is centered on all pulleys, the tensioner is released and the installation is complete. The engine is run to ensure normal operation.

Is it safe to drive with a serpentine belt problem?

No. Should the belt have visible damage, you risk unexpected and sudden breakage that could potentially leave you stranded. Serpentine belt problems that result in the alternator not charging may cause the battery to discharge, which will result in loss of electrical power to the vehicle. Additionally, if a deteriorated belt breaks and that belt drives the water pump, the engine will overheat in a matter of seconds.

When replacing the serpentine belt keep in mind:

  • On many cars, the expected service life of a serpentine belt is around 90,000 miles. Should the belt fail well prior to that, a very careful inspection should be performed to check for out-of-alignment pulleys, a possibly out-of-position crankshaft harmonic balancer on which the drive pulley is mounted, binding pulleys, or a defective belt tensioner.
  • Attention should always be given to serpentine belt routing, since proper routing is critical to proper belt tension, and function of the driven components.
  • Sometimes it is difficult to distinguish serpentine belt related noise from other engine noises. In these cases, a mechanic will determine the origin of the noise by momentarily running the engine without the serpentine belt attached.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(11)

Rating Summary
11
0
0
0
0
11
0
0
0
0

Dustin

6 years of experience
32 reviews
Dustin
6 years of experience
Suburban 1500 2006 - Serpentine/Drive Belt - Cypress, TX
Wonderful young man . He did e ery thing I needed.

Chuy

12 years of experience
300 reviews
Chuy
12 years of experience
Suburban 1500 2011 - Serpentine/Drive Belt - Oak Forest, IL
Very professional and friendly. Highly knowledgeable and goes above and beyond with service

Juan

10 years of experience
47 reviews
Juan
10 years of experience
Suburban 1500 2005 - Brake Pads - Vacaville, CA
Very professional

Luis

6 years of experience
132 reviews
Luis
6 years of experience
Suburban 1500 2008 - Oxygen Sensor - White Plains, NY
Thank you so much for all of your help!

Excellent Rating

(11)

Rating Summary
11
0
0
0
0
11
0
0
0
0
Number of Chevrolet Suburban 1500 Serpentine/Drive Belt Replacement services completed
121+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1700+
experts on our platform

Recent articles & questions

How to Paint Car Wheels
While While there are many ways to update the look of your vehicle, one method that is often overlooked is painting the wheels. It is far cheaper and simpler than changing the entire color of your car or truck, and...
10 Reasons To Get a Mobile Oil Change
The benefits of ordering an oil change to your home driveway.
P0877 OBD-II Trouble Code: Transmission Fluid Pressure Sensor/Switch “D” Circuit Low
P0877 means that the transmission fluid pressure that is above or below factory spec due to low fluid level, overheating engine, or faulty sensors.

Transmission fluid leak in 1996 Ford F-150

Unfortunately without looking over the vehicle in person, it is difficult to say whether additional work is required for your Ford F-150. It appears from the information provided that your Ford had a transmission leak prior to performing the transmission...

Can a faulty O2 sensor cause a lean burn?

Hi, thanks for writing in. Yes the O2 sensor can cause the vehicle to run lean. What the O2 sensor does is read the amount of air entering the engine and sends that information to the computer, the computer reads...

I just bought a 2007 Hyundai Santa Fe with the 3.3 v6. I had the oil changed snd 5.5 arts didn't show on stick. 6 barely did.

Hello, thank you for writing in. The vehicle should take 6 quarts of oil with a new filter. Make sure the dip stick is fully inserted and getting a proper reading. Also make sure you are checking the level after...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com