Chevrolet Silverado 3500 HD Windows Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(12)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(12)

Windows Inspection Service

How much does a Windows Inspection cost?

On average, the cost for a Chevrolet Silverado 3500 HD Windows Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2017 Chevrolet Silverado 3500 HDV8-6.0LService typeWindows InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2007 Chevrolet Silverado 3500 HDV8-6.6L Turbo DieselService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2022 Chevrolet Silverado 3500 HDV8-6.6LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2020 Chevrolet Silverado 3500 HDV8-6.6L Turbo DieselService typeWindows InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2016 Chevrolet Silverado 3500 HDV8-6.6L Turbo DieselService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2013 Chevrolet Silverado 3500 HDV8-6.0LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2021 Chevrolet Silverado 3500 HDV8-6.6LService typeWindows InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
2015 Chevrolet Silverado 3500 HDV8-6.6L Turbo DieselService typeWindows InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Chevrolet Silverado 3500 HD Windows Inspection prices

The windows on a car keep the interior safe, warm and dry. They allow fresh air in and make it easy to order at a drive thru window. If a window gets stuck up or down it can create a very unpleasant situation for the driver and passengers.

There can be a number of different problems with vehicle windows. The issue can vary from a blown fuse to a window switch that is not working. In some cases the glass can actually fall into the door.

Regardless of the problem, it should be fixed quickly, a malfunctioning window is not only inconvenient, it can also be dangerous.

How this system works:

Power Windows

The glass sits in a part called a regulator, which is pushed up and down by a small electric motor. The motor is attached to a worm gear and a number of spur gears, which creates a gear reduction, producing enough torque to lift the window while also keeping it level. When the window button is pushed the door module closes a relay, which then provides power to the window motor. The majority of problems with a power window are caused by the electrical system but faulty gears can also be the culprit.

Manual Windows

The glass is attached to a regulator, which is the component that pushes the window up and down. The handle sticks through the door panel and when the handle is cranked it moves the regulator up or down. Manual windows are rapidly being replaced by power windows.

Common reasons for this to happen:

  • Blown Fuse: If none of the power windows are functioning there is a good chance that the problem is a blown fuse or a bad relay. While these are two separate issues, the symptoms are often very similar. A complete inspection of the fuses and electrical system will be necessary to determine where the problem is and how to repair it.

  • Burned Out Motor: if the windows are not going up or down and there is no noise coming from the door when the switch is pressed there is a good chance the electric motor is burned out or malfunctioning. The motor will have to be replaced.

  • Power Window Regulator: If the motor is running when the switch is pressed but the window does not move, the regulator is likely damaged or malfunctioning. There are a number of parts that can break on a regulator. In this situation the regulator will have to be repaired or replaced.

  • Malfunctioning Motor: If the window is still moving up and down but very slowly, the electric motor may be malfunctioning. If it is making a whining sound this can also indicate a problem. As the motor ages it will wear out and eventually it will have to be replaced.

  • Broken Window Tracks: There are window track guides, which hold the window in place as it goes up and down. If the track guides are damaged it can cause problems with the window going up and down. Common symptoms include a slow moving window, and a rattling or grinding noise. Eventually, the window may fall inside the door.

  • Worn Window Switch: The power window switch gets used a lot and eventually it can wear out which will prevent power from going to the window. If this happens the window can end up stuck in the up or down position.

  • Bad Wiring: Wiring is integral to the operation of the power windows and if there is a short, a faulty switch or a malfunctioning relay it can bring the whole system to a halt. A professional should deal with wiring issues.

  • Broken Regulator Manual Window: If the window is starting to tilt sideways, the most likely cause is a broken regulator. The wheels on the end of a regulator will often break off which will cause the glass to tilt sideways, and eventually fall into the door.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the window issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A malfunctioning window is certainly not a life threatening situation but it can lead to interior damage and unsafe situations if the window is stuck in the down position. The flip side of that coin is a window stuck in the up position which can make it impossible to order at a drive-thru or use the window as an escape exit in the event of an emergency.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(12)

Rating Summary
11
0
0
0
1
11
0
0
0
1

Ivan

12 years of experience
19 reviews
Ivan
12 years of experience
Chevrolet Silverado 3500 HD V8-6.0L - Brake Pads Replacement (Front) - Burbank, California
Best mechanic ever! Very knowledgeable and easy to work with. Fast and very efficient!

Angel

28 years of experience
118 reviews
Angel
28 years of experience
Chevrolet Silverado 3500 HD V8-6.6L Turbo Diesel - Brake Pads Replacement (Rear) - Mesa, Arizona
Angel, was pleasant and did a good job! Thanks

Jeremy

20 years of experience
603 reviews
Jeremy
20 years of experience
Chevrolet Silverado 3500 HD V8-6.0L - Parking / Emergency Brake does not work - Boynton Beach, Florida
Had out of town guests leaving early AM, parking brake stuck. Wow, what an awesome experience with Jeremy. I would request and wait for him if possible. Knew his stuff, great personality, professional but personable. He was even earlier than quoted.

Lucas

21 years of experience
887 reviews
Lucas
21 years of experience
Chevrolet Silverado 3500 HD V8-6.0L - Grinding noise when braking - Simi Valley, California
Extremely knowledgeable, smart, and an enjoyment to be around.

Excellent Rating

(12)

Rating Summary
11
0
0
0
1
11
0
0
0
1
Number of Chevrolet Silverado 3500 HD services completed
132+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1600+
experts on our platform

Recent articles & questions

P2432 OBD-II Trouble Code: Secondary Air Injection System Air Flow/Pressure Circuit Low Bank 1
P2432 code definition The P2432 trouble code is a generic powertrain code related to the auxiliary emissions control system. This particular code...
P0435 OBD-II Trouble Code: Catalyst Temperature Sensor Bank 2
P0435 code means the oxygen sensors readings falls outside of the expected parameters due to fuel in the exhaust system, or injector malfunction.
P001C OBD-II Trouble Code: "A" Camshaft Profile Control Circuit High (Bank 1)
P001C means there is a circuit running high in bank 1, likely due to a timing chain that needs to be adjusted, or faulty wiring.

Suspension up front makes a ton of noise, creaks

The front suspension has many moving parts which could cause the noise you describe. The most likely cause is the sway bar links binding. They can be inspected by turning the suspension steering and bouncing the car up and down,...

Engine seems like it's out of time

Hello, thanks for writing in. It is surprising to me that there are no codes stored. Nonetheless, I suspect your timing chain (https://www.yourmechanic.com/services/timing-chain-replacement) and gear set are worn sufficiently that the timing chain has jumped one or more teeth, and...

So I need a special tool to remove a knock sensor on a 2005 Buick LaCrosse

An ordinary 6 point socket is used to replace the knock sensor on this model. Stalling, if that is what you mean by "cutting off", is not typically caused by a faulty knock sensor. Unless the knock sensor has been...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com