Chevrolet Silverado 3500 HD Car Battery Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(14)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(14)

Car Battery Replacement Service

How much does a Car Battery Replacement cost?

On average, the cost for a Chevrolet Silverado 3500 HD Car Battery Replacement is $306 with $166 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2011 Chevrolet Silverado 3500 HDV8-6.0LService typeCar Battery ReplacementEstimate$487.68Shop/Dealer Price$574.45 - $826.66
2023 Chevrolet Silverado 3500 HDV8-6.6LService typeCar Battery ReplacementEstimate$745.99Shop/Dealer Price$897.82 - $1349.20
2010 Chevrolet Silverado 3500 HDV8-6.6L Turbo DieselService typeCar Battery ReplacementEstimate$511.87Shop/Dealer Price$605.20 - $881.00
2013 Chevrolet Silverado 3500 HDV8-6.6L Turbo DieselService typeCar Battery ReplacementEstimate$511.87Shop/Dealer Price$605.20 - $881.00
2018 Chevrolet Silverado 3500 HDV8-6.6L Turbo DieselService typeCar Battery ReplacementEstimate$511.87Shop/Dealer Price$606.67 - $883.58
2017 Chevrolet Silverado 3500 HDV8-6.0LService typeCar Battery ReplacementEstimate$511.87Shop/Dealer Price$605.34 - $881.25
2021 Chevrolet Silverado 3500 HDV8-6.6LService typeCar Battery ReplacementEstimate$545.73Shop/Dealer Price$647.54 - $948.75
2019 Chevrolet Silverado 3500 HDV8-6.6L Turbo DieselService typeCar Battery ReplacementEstimate$511.87Shop/Dealer Price$605.20 - $881.00
Show example Chevrolet Silverado 3500 HD Car Battery Replacement prices

What are car batteries and how do they work?

A car battery is an energy storage device that relies on a chemical reaction within the battery to produce electricity. The stored electrical energy is used to initially operate the starter motor, ignition system, and fuel system on your vehicle. Once your car engine is running, the alternator supplies the electricity needed for all vehicle systems and charges the battery to replace the electric energy used when starting a car.

Most electric vehicles have a traction battery which is in addition to the standard 12 volt battery that is used to start the car engine. Traction batteries also convert chemical energy to supply electrical energy but operate at higher voltages and often are monitored by the PCM (Powertrain Control Module).

Battery

When to replace a car battery?

  • Your car doesn’t start. A new battery has a specified capacity to provide power. This capacity is referred to as the cranking amps rating of the battery. As a battery ages, the actual amps that a battery can supply becomes lower than its original rating Once the cranking amps fall below a critical threshold, it will be difficult or impossible to start your car.
  • Battery or charging system warning light is illuminated. Should a battery or charging system warning light illuminate, a mechanic should perform a few basic tests to determine if a battery replacement is needed.
  • Electrical components don’t work. Once a battery has started to fail, and the voltage produced by the battery drops, then vehicle electrical components can malfunction, such as the security system. If you are experiencing electrical malfunctions, it’s a smart idea to have the battery tested.

How do mechanics replace the battery?

  • A temporary power source might be installed to avoid the possibility of losing radio presets or stored data in the PCM while the battery is out. When the battery is already completely dead, this step is unnecessary.
  • The vehicle’s negative cable is removed from the battery, followed by the positive cable. The battery tie down system is loosened and the old battery removed.
  • Cable ends and wiring are carefully inspected to ensure cleanliness and no corrosion. In some cases, corrosion can be extreme and the cable may need to be replaced or wiring repaired.
  • The new battery is installed and the tie down system is reinstalled. Anti-corrosion compound is applied to the battery terminals. The positive terminal is reconnected followed by the negative terminal.
  • Some vehicles, for example some models of BMW, VW, and Audi, may require PCM programming to input battery parameters. This step, performed using a specialized scan tool, is necessary to maximize battery life and prevent electrical system malfunctions.
  • The car is started and charging system output is measured and compared against the factory OEM specification to ensure that the new battery will properly recharge. Generally, charging output will be in the range of 13.8 to 14.8 volts but the exact specifications vary by make and model.

Is it safe to drive with a battery problem?

Yes, but if you have a weak battery you might be left stranded somewhere if the battery dies completely and you cannot start your car. A faulty battery may also needlessly overload the alternator and could adversely affect the operation of the vehicle’s electrical system, including the vehicle security system and the shift interlock.

When replacing the battery keep in mind:

  • The quality of the electrical connections to the battery posts is important. Connections must be clean, free of corrosion and properly tightened.
  • Batteries store a large amount of energy and if short-circuited a battery could explode and can create intense discharges that can damage your eyesight. Insulated tools should be used to attach cabling to battery terminals. Otherwise, the battery’s positive cable can be shorted to ground or the positive and negative posts can be directly shorted. Batteries can only be safely installed from a positive terminal to positive wiring and from a negative terminal to body ground. If the polarity is reversed damage will likely occur to the vehicle’s electrical system.
  • Generally, a car battery will have a service life of 4 to 7 years. If a load test on a battery reveals a significant reduction in the capacity of the battery to provide power, you should buy a new battery rather than wait for the old battery to fail completely.
  • Batteries should only be disconnected if the engine is off and the alternator is not running. Disconnecting a car battery while the alternator is running can cause a voltage spike that will damage sensitive electronic components in the vehicle, such as the PCM.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(14)

Rating Summary
13
0
0
0
1
13
0
0
0
1

ivan

13 years of experience
19 reviews
ivan
13 years of experience
Chevrolet Silverado 3500 HD V8-6.0L - Brake Pads Replacement (Front) - Burbank, California
Best mechanic ever! Very knowledgeable and easy to work with. Fast and very efficient!

Lucas

30 years of experience
938 reviews
Lucas
30 years of experience
Chevrolet Silverado 3500 HD V8-6.0L - Grinding noise when braking - Simi Valley, California
Extremely knowledgeable, smart, and an enjoyment to be around.

Angel

29 years of experience
118 reviews
Angel
29 years of experience
Chevrolet Silverado 3500 HD V8-6.6L Turbo Diesel - Brake Pads Replacement (Rear) - Mesa, Arizona
Angel, was pleasant and did a good job! Thanks

Chris

19 years of experience
600 reviews
Chris
19 years of experience
Chevrolet Silverado 3500 HD V8-6.6L Turbo Diesel - Thermostat - Forney, Texas
Chris was very professional prompt and thorough. He was very responsive in all communication and followed up quickly. He was very knowledgeable, helpful and overall excellent experience with Chris and Your Mechanic. I would definitely use Chris and Your Mechanic again..

Excellent Rating

(14)

Rating Summary
13
0
0
0
1
13
0
0
0
1
Number of Chevrolet Silverado 3500 HD services completed
154+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1700+
experts on our platform

Recent articles & questions

10 Best Car Seat Cushions and Covers
Car cushions and seat covers provide comfort, protection, and wicks moisture. Aylio's Comfort Foam Cushion relieves back pain during long drives.
P2600 OBD-II Trouble Code: Coolant Pump Control Circuit/Open
P2600 means there is an issue with the auxiliary coolant pump control circuit, usually due to a faulty relay or damaged components.
Disabled Driving Laws and Permits in Iowa
Driver Driver disability laws vary by state. It is important that you know the rules and regulations not only for the state in which you live, but also for states that you might visit or travel through. How do I...

My 2006 Hyundai Tucson 2.7l 4wd is not selecting gear when in drive , it moves but won't change to d next gear for smooth run

Hi there. In most cases, when you have this type of shifting problem, it's due to old transmission fluid inside the hydraulic lines of the transmission. It could also be due to inner transmission seals being damaged or an inner...

How do I install a high pressure power steering line I can't get it to twist and screw into the rack

The double flare end of the tube should be fully inserted until the flare mates with the convex sealing surface. The tube nut should then smoothly thread all the way down by hand. If the tube nut does not start...

It won't start

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com