Chevrolet Silverado 1500 HD Fuel Injector Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(12)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(12)

Fuel Injector Replacement Service

How much does a Fuel Injector Replacement cost?

On average, the cost for a Chevrolet Silverado 1500 HD Fuel Injector Replacement is $1324 with $1184 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2005 Chevrolet Silverado 1500 HDV8-6.0LService typeFuel Injector ReplacementEstimate$2522.24Shop/Dealer Price$3117.65 - $4895.78
2003 Chevrolet Silverado 1500 HDV8-6.0LService typeFuel Injector ReplacementEstimate$2513.23Shop/Dealer Price$3106.87 - $4883.68
2006 Chevrolet Silverado 1500 HDV8-6.0LService typeFuel Injector ReplacementEstimate$2513.23Shop/Dealer Price$3106.90 - $4883.72
2002 Chevrolet Silverado 1500 HDV8-6.0LService typeFuel Injector ReplacementEstimate$2513.23Shop/Dealer Price$3106.90 - $4883.72
2001 Chevrolet Silverado 1500 HDV8-6.0LService typeFuel Injector ReplacementEstimate$2513.23Shop/Dealer Price$3108.37 - $4886.30
Show example Chevrolet Silverado 1500 HD Fuel Injector Replacement prices

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

  • Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
  • Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
  • Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
  • Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

  • Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
  • The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
  • The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
  • The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
  • Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
  • The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
  • Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

  • Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
  • If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
  • Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
  • On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(12)

Rating Summary
11
0
0
0
1
11
0
0
0
1

Jay

38 years of experience
1035 reviews
Jay
38 years of experience
Chevrolet Silverado 1500 HD V8-6.0L - Car is stalling - Corona, California
Jay is always professional and can spot the problem/fix right away!

Allen

37 years of experience
471 reviews
Allen
37 years of experience
Chevrolet Silverado 1500 HD V8-6.0L - Window Motor / Regulator Assembly Replacement (Passenger Side Rear) - Daytona Beach, Florida
Great guy... great personality. Very fast efficient and effective.

Eric

15 years of experience
73 reviews
Eric
15 years of experience
Chevrolet Silverado 1500 HD V8-6.0L - Water Pump - Fayetteville, Georgia
Eric arrived early and was fantastic. He completed the job quickly and was friendly and very knowledgeable.

Nicholas

12 years of experience
303 reviews
Nicholas
12 years of experience
Chevrolet Silverado 1500 HD V8-6.0L - Coolant is leaking - Conroe, Texas
Great service. Always on time

Excellent Rating

(12)

Rating Summary
11
0
0
0
1
11
0
0
0
1
Number of Chevrolet Silverado 1500 HD services completed
132+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1700+
experts on our platform

Recent articles & questions

What Causes a Car to Stall?
You trust your car. You may not think about it, but you believe that certain functions will occur without fail. You may be aware...
The 10 Things to Check in a Pre-Purchase Inspection
A pre-purchase inspection will help you feel assured about a buying a used car. Check warning lights, fluids, tires, suspension, and brakes in a PPI.
How to Dispose of an Old Child Car Seat
Car Car seats are an integral part of owning a car when you have a child. When your kid is an infant or a young child, they should always be placed in a car seat (https://www.yourmechanic.com/article/5-essential-things-to-know-about-baby-car-seats) when you drive. A...

Car slams into gear after having transmission flushed

Sometimes, on older and/or high mileage transmissions, a fluid flush can be detrimental. The old fluid (which is full of friction material from the transmission clutches) is all that is holding the transmission together. However, this may not be the...

Why would there be 4 warning signs appearing in my 2010 hybrid

Hello. I would need to know the model of the vehicle to be able to give a better diagnosis as to what is going on. If you have warning lights that came on all of a sudden then the computer...

2009 vw tiguan p12a2,p0341- camshaft P.S p0343, p0300-misfire,p0016-crankshaft P.S, p0299,p2293,p011,car start but does't have

The codes implicate engine timing (valve versus crankshaft position), but also fuel supply. Either fault could account for the loss of power and misfiring. If you request an engine loss of power diagnostic (https://www.yourmechanic.com/services/loss-of-power-inspection) the mechanic will find the cause....

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com