Chevrolet Silverado 1500 HD Classic Control Arm Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(114)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(114)

Control Arm Assembly Replacement Service

How much does a Control Arm Assembly Replacement cost?

On average, the cost for a Chevrolet Silverado 1500 HD Classic Control Arm Assembly Replacement is $301 with $161 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2007 Chevrolet Silverado 1500 HD ClassicV8-6.0LService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$677.96Shop/Dealer Price$766.61 - $1013.91
2007 Chevrolet Silverado 1500 HD ClassicV8-6.0LService typeControl Arm Assembly - Front Lower Left ReplacementEstimate$880.30Shop/Dealer Price$1020.64 - $1432.20
2007 Chevrolet Silverado 1500 HD ClassicV8-6.0LService typeControl Arm Assembly - Front Upper Right ReplacementEstimate$657.24Shop/Dealer Price$741.88 - $986.18
2007 Chevrolet Silverado 1500 HD ClassicV8-6.0LService typeControl Arm Assembly - Front Lower Right ReplacementEstimate$880.30Shop/Dealer Price$1020.70 - $1432.29
2007 Chevrolet Silverado 1500 HD ClassicV8-6.0LService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$1016.41Shop/Dealer Price$1237.35 - $1892.66
2007 Chevrolet Silverado 1500 HD ClassicV8-6.0LService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$1016.41Shop/Dealer Price$1236.01 - $1890.33
2007 Chevrolet Silverado 1500 HD ClassicV8-6.0LService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$1016.41Shop/Dealer Price$1235.89 - $1890.11
2007 Chevrolet Silverado 1500 HD ClassicV8-6.0LService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$1016.41Shop/Dealer Price$1235.87 - $1890.08
Show example Chevrolet Silverado 1500 HD Classic Control Arm Assembly Replacement prices

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

  • Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
  • Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
  • Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
  • Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

  • The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
  • Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
  • Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
  • For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
  • The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
  • The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
  • The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

  • The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
  • Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
  • All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(114)

Rating Summary
102
5
4
0
3
102
5
4
0
3

Scott

37 years of experience
995 reviews
Scott
37 years of experience
Chevrolet S10 V6-4.3L - Control Arm Assembly Replacement (Front Lower Left, Front Lower Right) - Phoenix, Arizona
Well what can I say about Scott no job is too small or too big for Scott runs into problems and never quits very determined mechanic very knowledgeable if you're looking for someone he's your man great jod scott and thank you so much will be calling again when a problem arises

John

21 years of experience
650 reviews
John
21 years of experience
Chevrolet HHR L4-2.2L - Control Arm Assembly Replacement (Front Lower Left, Front Lower Right) - Orlando, Florida
Very professional and knowledgeable... thank you!

Vlad

15 years of experience
79 reviews
Vlad
15 years of experience
Chevrolet Impala L4-2.5L - Control Arm Assembly Replacement (Front Lower Left, Front Lower Right) - Des Plaines, Illinois
He was honest very detailed and just an all around great person

Nathan

30 years of experience
260 reviews
Nathan
30 years of experience
Chevrolet Trailblazer L6-4.2L - Control Arm Assembly Replacement (Front Upper Left, Front Upper Right) - Arlington, Texas
Nathan is a great mechanic!. He definitely goes above and beyond to make things right.

Excellent Rating

(114)

Rating Summary
102
5
4
0
3
102
5
4
0
3
Number of Chevrolet Control Arm Assembly Replacement services completed
1254+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1700+
experts on our platform

Recent articles & questions

P0206 OBD-II Trouble Code: Injector Circuit Malfunction - Cylinder 6
P0206 code definition Injector Circuit Malfunction - Cylinder 6 What the P0206 code means When a P0206 code is seen, the Engine...
How Long Does a Coolant Tube Last?
The The coolant tube, or hose, carries coolant to and from the engine in your vehicle. First, the coolant tube removes the hot coolant from the engine and brings it to the radiator which cools it down. The cooled fluid...
Top 10 Bad Driving Habits That Damage Your Car
Even the best drivers are guilty of bad driving habits. Riding the brakes, not warming up the engine, and ignoring warning signs will damage your car.

Engine revs really high up when I idle

Hello, by the way you describe your concern, it sounds like the vehicle has a high idle, or an idle flare at a stop. Check for the Technical Service Bulletin (TSB 01-005/14) for an updated software/firmware to help remedy this...

How much does it cost to tint the windows of my Honda Accord?

Hi Art, thanks for your question. The rules and regulations for window tinting in California (https://www.yourmechanic.com/article/the-guide-to-legal-car-modifications-in-california-by-valerie-mellema) indicate that front side windows must allow over 70% of the light through but rear and back side windows can have any tint darkness....

2004 Acura TSX Temperature Gauge Rises To Near Hot in Idle

It is very possible that your electric cooling fans are beginning to fail. The electric cooling fans are intended to keep the engine cool while it is idling and at a stop. When the vehicle is being driven at higher...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com