Chevrolet Metro Valve Cover Gasket Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(13)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(13)

Valve Cover Gasket Replacement Service

How much does a Valve Cover Gasket Replacement cost?

On average, the cost for a Chevrolet Metro Valve Cover Gasket Replacement is $190 with $50 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1999 Chevrolet MetroL3-1.0LService typeValve Cover Gasket ReplacementEstimate$255.60Shop/Dealer Price$284.35 - $362.50
1998 Chevrolet MetroL4-1.3LService typeValve Cover Gasket ReplacementEstimate$253.57Shop/Dealer Price$282.30 - $364.36
1992 Chevrolet MetroL4-1.3LService typeValve Cover Gasket ReplacementEstimate$1061.44Shop/Dealer Price$1181.32 - $1523.38
2000 Chevrolet MetroL3-1.0LService typeValve Cover Gasket ReplacementEstimate$246.59Shop/Dealer Price$273.60 - $350.44
2001 Chevrolet MetroL4-1.3LService typeValve Cover Gasket ReplacementEstimate$253.57Shop/Dealer Price$283.80 - $366.98
2000 Chevrolet MetroL4-1.3LService typeValve Cover Gasket ReplacementEstimate$253.57Shop/Dealer Price$282.46 - $364.65
1998 Chevrolet MetroL3-1.0LService typeValve Cover Gasket ReplacementEstimate$246.59Shop/Dealer Price$273.61 - $350.47
1999 Chevrolet MetroL4-1.3LService typeValve Cover Gasket ReplacementEstimate$253.57Shop/Dealer Price$282.32 - $364.40
Show example Chevrolet Metro Valve Cover Gasket Replacement prices

What is a valve cover gasket and how does it work?

Each cylinder head on your car’s engine has an aluminum or plastic valve cover bolted to it. Between this valve cover and the cylinder head, there is a gasket that keeps engine oil from leaking out. The valve cover bolts keep the gasket compressed, thus preventing leaks. Over time the gasket becomes brittle from the engine’s heat or the bolts loosen, creating an engine oil leak.

When to consider replacing a valve cover gasket?

Look for these signs of oil leakage at the valve cover gasket:

  • Oil seepage or dripping. Should the joint between the valve cover and the cylinder head fail, oil often becomes visible on the valve cover or cylinder heads. Usually, the oil will attract and hold dirt.
  • Oil accumulating inside the spark plug well. The spark plug tube seals are part of the valve cover sealing system. If the tube seals are leaking, you will see oil on the spark plugs or wires. The valve cover gasket and tube seals are all replaced at one time if either fails.
  • Oil leakage at the rubber grommets. The bolts holding the valve cover to the cylinder head sometimes have rubber grommet seals under the bolt heads. If these seals are leaking, you will see oil seepage around the bolt heads.

How do mechanics replace a valve cover gasket?

  • Remove engine cover. Some engines have plastic covers over the entire top. The plastic engine cover is removed to access the valve cover(s).
  • Remove components. On 4 cylinder engines, the valve cover is usually readily accessed once any electrical components and emission control tubing are removed, plus any accelerator linkages that might be in the way. On 6 or 8 cylinder engines, depending on which valve cover gasket is leaking, removal of the air intake plenum might be required, as well as additional steps.
  • Remove valve cover. Once the valve cover(s) is accessed, the cover retaining bolts are removed and the cover pulled off. The valve cover sealing surface is checked with a straight edge to be sure the cover is flat and thus reusable.
  • Install new gasket. The new valve cover gasket is applied along with new rubber grommets under the retaining bolt heads. If there are spark plug tube seals, these are replaced as well. In some applications, oil resistant RTV (room temperature vulcanization) sealant must be applied to specific segments of the sealing surface, along with the new gasket, to ensure a complete and effective seal. The cover is bolted back on, using a calibrated inch pound torque wrench, and all other components are restored to their original position.
  • Check for leaks. Finally, the car engine is run and a visual check is made for oil leaks.

Is it safe to drive with a valve cover gasket problem?

Yes, as long as the amount of oil leaking is small, and there is no leak onto hot engine parts such as the exhaust manifold, it is safe to drive your car until you have an opportunity to fix it.

If you notice oil leaking on to the ground beneath your car after it is parked, you do not have a small leak, and it needs to be found and repaired as soon as possible. Any leak, of course, means your oil level is dropping as you drive the car. If you have a leak, be sure to check your oil more frequently than usual so you do not run low on oil and damage the engine.

When replacing a valve cover gasket keep in mind:

  • The mechanical components of a car engine will typically outlive the gaskets used to seal the engine. However, many of these gaskets, including the valve cover gaskets, are relatively easy to replace.
  • Never add stop leak type products to engine oil or other vehicle fluids. Not only are these materials not approved or specified by the original equipment manufacturers, but they also can create additional problems that may be costly to repair.
  • Often, if a car is old enough to have a valve cover oil leak, there will be oil leaks elsewhere on the engine, so you should request a complete leak inspection. It may be more cost effective to repair multiple leaks during one service call.
  • Often, the PCV (Positive Crankcase Ventilation) valve is inserted into a rubber grommet in one of the valve covers. An old rubber grommet is a potential leak source, as well as connections to the PCV valve. These components should be inspected and considered for replacement while there is access to the valve cover.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(13)

Rating Summary
13
0
0
0
0
13
0
0
0
0

Alfred

14 years of experience
587 reviews
Alfred
14 years of experience
Chevrolet Metro L4-1.3L - Car does not shift from park to drive - San Francisco, California
Love this guy - he saved our lives and many thou$and$ of $$

Raymond

38 years of experience
613 reviews
Raymond
38 years of experience
Chevrolet Metro L4-1.3L - Front Crankshaft Seal - North Las Vegas, Nevada
Hes a REAL cool mechanic.....Dont get stressed call YM

Oreste

15 years of experience
149 reviews
Oreste
15 years of experience
Chevrolet Metro L4-1.3L - Car Battery Replacement - Hollywood, Florida
Orestes was polite and very knowledgeable. I would recommend him highly.

Fabrice

21 years of experience
134 reviews
Fabrice
21 years of experience
Chevrolet Metro L3-1.0L - Car Inspection - Orlando, Florida
Fabrice did an excellent job diagnosing a coolant leak (which I originally thought was a water pump leak meaning a timing belt replacement), and went above and beyond when finding and replacing an O-ring which is no longer available even in aftermarket. Fabrice is ASE certified - that should be added to his mechanic profile.

Excellent Rating

(13)

Rating Summary
13
0
0
0
0
13
0
0
0
0
Number of Chevrolet Metro services completed
143+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1700+
experts on our platform

Recent articles & questions

How Long Does a Windshield Washer Reservoir Last?
Most Most people take a clean windshield for granted and neglect to realize just how many parts have to work together to clean a dirty front glass. Making sure that each of the parts that helps to keep the windshield...
How to Register a Car in Rhode Island
If If you are in the process of moving to the great state of Rhode Island, then you will need to take some time to make sure you follow all of the laws of the state. Among the most important...
How to Replace a Lost or Stolen Car Title in Nebraska
Your Your car title may seem like a small item but in fact it’s a very important piece of paper. This title is what proves you are the registered owner of your vehicle. This is important if you ever have...

Car has been sitting and won't start

The car sitting for a year is most likely a dead battery. These cars are known to have loss of memory problems and the systems have to be reset with a factory scanner. I recommend you have a mechanic like...

Car stalled in stop and go traffic.

Your car may have a dirty or failing idle air control valve. The idle air control valve (https://www.yourmechanic.com/services/idle-control-valve-replacement) reads the air intake as it is mixed with fuel prior to being injected into the engine at low speeds and at...

Is there a dogbone mount on the driver's side? There's one on the passenger side, but it seems fine 2001 Chevrolet Cavalier

Hi - no, there is only the one dogbone link up top. There are 2 motor/transmission mounts (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-engine-mount) where the engine/transmission are supported by the chassis, and these should be inspected for failure. They become soft, and fail with time,...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com