Chevrolet Metro Intake Manifold Gaskets Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(13)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(13)

Intake Manifold Gaskets Replacement Service

How much does a Intake Manifold Gaskets Replacement cost?

On average, the cost for a Chevrolet Metro Intake Manifold Gaskets Replacement is $376 with $96 for parts and $280 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1999 Chevrolet MetroL4-1.3LService typeIntake Manifold Gaskets ReplacementEstimate$528.24Shop/Dealer Price$590.00 - $759.08
1998 Chevrolet MetroL3-1.0LService typeIntake Manifold Gaskets ReplacementEstimate$586.23Shop/Dealer Price$639.20 - $786.96
1999 Chevrolet MetroL3-1.0LService typeIntake Manifold Gaskets ReplacementEstimate$586.23Shop/Dealer Price$639.27 - $787.08
2000 Chevrolet MetroL3-1.0LService typeIntake Manifold Gaskets ReplacementEstimate$586.23Shop/Dealer Price$639.26 - $787.07
2000 Chevrolet MetroL4-1.3LService typeIntake Manifold Gaskets ReplacementEstimate$510.22Shop/Dealer Price$571.44 - $740.12
1998 Chevrolet MetroL4-1.3LService typeIntake Manifold Gaskets ReplacementEstimate$510.22Shop/Dealer Price$568.78 - $735.45
2001 Chevrolet MetroL4-1.3LService typeIntake Manifold Gaskets ReplacementEstimate$510.22Shop/Dealer Price$568.53 - $735.02
Show example Chevrolet Metro Intake Manifold Gaskets Replacement prices

What is an intake manifold gasket and how does it work?

The intake on an engine may be made up of a lower intake manifold and an upper intake manifold or plenum. The lower intake manifold is a cast aluminum or molded plastic chamber bolted to the cylinder head of the engine. The intake manifold must be tightly sealed to the cylinder head(s) using a gasket in order to prevent air, oil, or engine coolant leaks.

When to consider replacing the intake manifold gasket:

Internal or external leaks. Due to constant temperature expansion and contraction of engine parts or overheating, the gasket’s ability to seal properly can be ruined, resulting in problems such as:

  • Internal or external engine coolant leaks. In some applications, the manifold has cooling passages within. If the manifold seal to the engine fails, coolant can leak externally or even into the engine oil crankcase, where coolant can be noticed in the engine oil.
  • Engine overheating. If the leak at the manifold is a leak of engine coolant, it can lead to engine overheating. However, there are other causes of engine overheating, so a mechanic would have to determine the actual cause.
  • External oil leaks. On some 6 and 8 cylinder engines, the intake manifold sits atop an oil-lubricated area of the engine block. If the manifold gasket has failed, oil can leak from the block to the exterior of the engine.
  • Poor engine operation, lean operation, rough idle. Vacuum air leaks into the manifold due to a defective gasket that will upset the air-fuel ratio. The engine may run poorly.
  • Check engine light. Minor leaks at the intake manifold gasket will not usually cause the check engine light to illuminate. However, as a leak persists, it may grow larger and it possible for the leak to degrade engine performance enough that it will cause a trouble code to set, which will cause the check engine light to illuminate.

How do mechanics replace the intake manifold gasket?

  • Working on a cold engine, the engine cover is removed. If the intake manifold has internal cooling system passageways, the engine coolant is drained below the level of those passageways.
  • The accelerator cable assembly and cruise control cable are removed and set aside. All electrical connections and emission and vacuum lines in the way of the intake are removed. Ignition components, such as the coil, are removed as needed. If the car has an upper plenum, that is removed and set aside.
  • If the fuel rail is bolted to the intake manifold, the supply and return connections to the fuel rail are disconnected.
  • Once all connections to the manifold are clear, the manifold is unbolted and removed from the engine.
  • Aluminum and plastic manifolds are checked with a machinist’s straightedge to ensure the surface flatness does not exceed the original equipment manufacturer’s specification. If the surface of a manifold is not flat, the new gasket will not seal properly. Plastic manifolds are checked for cracks, heat damage, and warpage.
  • Once the manifold is deemed re-usable or replaced as needed, the new gasket is applied, the manifold is put in position and the mounting bolts are torqued with a calibrated torque wrench in the OEM specified sequence. In some applications, RTV sealant must be applied in corners of the mounting surface or specified hard-to-seal spots, per the service manual.
  • All removed components are then re-installed in the reverse of the above steps.
  • Finally, the vehicle is run and checked for leaks, and test driven.

Is it safe to drive with an intake manifold gasket problem?

Yes. The principal concern with a leaking intake manifold gasket is potential damage to the engine, depending on where the leak is. Although the vehicle will generally be safe to drive, you should schedule service as soon as possible to minimize the chances of additional costly damage. If the leak involves coolant, it could lead to engine overheating damage or the coolant could contaminate the engine oil, which can damage the engine bearings. If there is an air leak to the cylinders, it can cause lean operation which could overheat the catalytic converter.

When replacing the intake manifold gasket keep in mind:

  • In engines where coolant flows through the intake manifold, a leaking intake manifold gasket can be either the cause of or result of engine overheating. If you have a leaking intake manifold gasket, and the engine has overheated, the entire engine should be inspected for damage, such as a blown head gasket. The engine cooling system thermostat should be replaced because engine overheating can damage the cooling system thermostat.
  • Some car engine designs are more likely than others to experience leaking intake manifold gaskets due to material and design issues. Your mechanic can inform you if your car represents one of these cases. Many times a re-designed gasket, or altered installation technique and torque values, will be relevant to avoid a recurrence of any leaks. Mechanics will consult Technical Service Bulletins to determine if any unique circumstance exists for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(13)

Rating Summary
13
0
0
0
0
13
0
0
0
0

Richard

14 years of experience
601 reviews
Richard
14 years of experience
Chevrolet Metro L4-1.3L - Clutch Cable - North Las Vegas, Nevada
Richard is very nice and knows what he is doing! He proved too me that I have a GREAT car even for it's miles! Thanx Richard

Raymond

38 years of experience
613 reviews
Raymond
38 years of experience
Chevrolet Metro L4-1.3L - inspect belts and pulleys - North Las Vegas, Nevada
Hes a great,honest mechanic,very smart

Oreste

15 years of experience
149 reviews
Oreste
15 years of experience
Chevrolet Metro L4-1.3L - Car Battery Replacement - Hollywood, Florida
Orestes was polite and very knowledgeable. I would recommend him highly.

Stephen

13 years of experience
36 reviews
Stephen
13 years of experience
Chevrolet Metro L4-1.3L - Headlight Bulb Replacement (Driver Side Low Beam, Driver Side High Beam) - San Diego, California
Very nice, capable and had the job completed quickly and efficiently.

Excellent Rating

(13)

Rating Summary
13
0
0
0
0
13
0
0
0
0
Number of Chevrolet Metro services completed
143+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1700+
experts on our platform

Recent articles & questions

How A Vehicle’s Headlights Work
The The History of Headlights When cars were first being produced, the headlight was more of a lamp, with an enclosed acetylene flame which had to be manually lit by the driver. Those early headlights were introduced in the 1880s,...
How to Finance a Used Car
You’ve You’ve saved some money to purchase a used car. And while you could use those funds to pay cash for a vehicle from an individual, you can also benefit from having money in hand when visiting a dealership. The...
How to Buy a Good Quality AC Low Pressure Hose
Air Air conditioning is one of the most important creature comforts in a car. When a component of the AC system malfunctions, you will feel the pain almost right away, and no doubt want to correct it ASAP. The AC...

Noises when backing up and turning.

The front strut bearings could be noisy or binding. If the front end is lifted and you turn the wheel from left to right, you may be able to detect the noise that way if that bearing is an issue....

Replacing a power window motor - 2005 Chevrolet Equinox

If you have already removed the motor and regulator assembly but are unable to separate the two, I would recommend using a pry bar of some sort to try to separate the gears. If this does not work, it is...

Why is my car overheating? 2011 Chevrolet Cruze

Hi. It sounds like there may be a problem with the radiator being clogged (https://www.yourmechanic.com/services/radiator-replacement) or just not operating properly. If the radiator is clogged or not operating properly, it will cause the car to overheat and the heat to...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com