Chevrolet Equinox ECM-Power Relay Replacement at your home or office.

What is the ECM-Power Relay all about?

Vehicle development has evolved over the past several decades to a point where it seems every vehicle function is controlled by a computer, right down to the engine itself. This is actually the case for the engine and its related functions as it is controlled by the engine control module, or ECM. The ECM monitors and adjusts operation and power distribution to the fuel supply and injection systems, engine timing, exhaust gas recirculation, emissions, ignition system, and several other systems. In order to dispense power to operate these other systems, the engine control module requires power itself.

The power distribution center, or fuse block, located under the hood houses most or all of the vehicle’s fuses and relays. It contains a relay for the ECM that is powered up when the ignition key is turned to the on position. This ECM power relay acts as a switch that supplies power to the ECM. When the ignition is turned off, power switches inside the ECM relay and it no longer receives battery power. If the ECM power relay stops switching as it should, you will experience vehicle problems. When the relay is stuck open, no power will be delivered to the engine control module and the vehicle won’t start. If the relay is stuck closed, constant power will be sent to the ECM even with the engine turned off and the battery will drain.