Chevrolet Classic Ignition Switch Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(91)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(91)

Ignition Switch Replacement Service

How much does a Ignition Switch Replacement cost?

On average, the cost for a Chevrolet Classic Ignition Switch Replacement is $570 with $374 for parts and $196 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2005 Chevrolet ClassicL4-2.2LService typeIgnition Switch ReplacementEstimate$964.84Shop/Dealer Price$1156.84 - $1721.50
2004 Chevrolet ClassicL4-2.2LService typeIgnition Switch ReplacementEstimate$952.23Shop/Dealer Price$1141.75 - $1704.56
Show example Chevrolet Classic Ignition Switch Replacement prices

What is the Ignition Switch all about?

The ignition switch, located on the steering column or in the dashboard, takes the power from the battery and directs it to all the accessories and electrical components of your car. It also transfers the power to the starter when you turn the ignition key. If the starter does not receive power from the ignition key, the car will not start. When the ignition switch goes bad, your car may not start and the accessories (lights, radio, etc.) may not work. Replacing an ignition switch can be as simple as removing a few screws to access the ignition switch, or as complicated as removing the whole steering column.

Ignition Switch

Keep in mind:

  • After an ignition switch is replaced, all electrical components should be checked to ensure proper operation.

How it's done:

  • Check the condition of the ignition switch.
  • Remove and replace the ignition switch if it is bad.
  • Verify operation of electrical components.

Our recommendation:

The battery feeds power to ignition switch, so it is important for the ignition system that the battery is in good condition. Don't put too much weight on your key ring because this can damage the key and the tumbler part of the ignition switch. If there is no power inside the car (none of the electrical components are working), have the mechanic inspect the main fuses. If the fuses are good, then the mechanic should inspect the ignition switch and other electrical components.

What common symptoms indicate you may need to replace the Ignition Switch?

  • Car may not start.
  • Car starts then dies.
  • Some electrical components may not work (radio, clock, lights, etc.).

How important is this service?

The ignition switch serves to send power from the battery. When you turn your key to turn on your vehicle, the ignition switch takes power from the battery and sends it to the starter, which allows your vehicle to turn on. When you turn on any electrical components in your vehicle (such as your lights, radio, and air conditioning), the ignition switch draws power from the battery, and sends it to these electrical components to power them. When your ignition switch stops working, your starter and your electrical components have no way of drawing power from your battery. With a faulty ignition switch, you won’t be able to use your radio, lights, or air conditioning, and you won’t be able to turn on your vehicle. In extreme cases, a broken ignition switch won’t allow you to turn your vehicle off, even if you remove the key.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(91)

Rating Summary
84
3
2
1
1
84
3
2
1
1

Ben

19 years of experience
114 reviews
Ben
19 years of experience
Chevrolet Classic L4-2.2L - Oxygen Sensor Replacement (Front/Upper/Upstream, Rear/Lower/Downstream) - Denver, Colorado
Ben was very knowledgeable, communicative and did I great job, I will use him again for future repairs!

Jacob

13 years of experience
329 reviews
Jacob
13 years of experience
Chevrolet Classic L4-2.2L - Brake Caliper Replacement (Driver Side Front) - Allen, Texas
Great all around! No complaints.

Tim

31 years of experience
45 reviews
Tim
31 years of experience
Chevrolet Classic L4-2.2L - Car is not starting - Decatur, Georgia
Tim was excellent. He took his time to diagnose the problem and was very thorough.

Jason

24 years of experience
20 reviews
Jason
24 years of experience
Chevrolet Classic L4-2.2L - Other Inspections - Larkspur, California
He was knowledgeable and I would recommend Jason to my family and friends.

Excellent Rating

(91)

Rating Summary
84
3
2
1
1
84
3
2
1
1
Number of Chevrolet Classic services completed
1001+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1700+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Emergency / Parking Brake Shoe
If your parking brake does not properly hold the vehicle or does not function at all, you may need to replace a parking brake shoe.
The Guide to Legal Car Modifications in North Dakota
ARENA Creative / Shutterstock.com If you live in North Dakota or are planning to move to the state, it is important that you know whether your modified vehicle is within the laws in the state. The following...
P2266 OBD-II Trouble Code: Low Voltage in Water in Fuel Sensor
P2266 P2266 code definition The P2266 code is set when low voltage is detected in the WIF (Water in Fuel) Sensor circuit at the Engine Control Module (ECM). Other fuel system codes may set along with P2266. What the P2266...

How does the windshield wiper and washer switch work?

Your windshield wiper and washer switch might not be critical to driving the car, but it does provide you with important functionality, particularly when it starts to rain. Here’s what you need to know about using it: Turn the knob...

Replaced fuel pump. Car won't start. 2002 Infinity I35

Hi there - the metal component you describe is a fuel check valve on the fuel return line. Its function is to maintain a small amount of pressure in the fuel system so that starting does not require the fuel...

Ok so i just got a use but like new alternator on my 2011 chevy cruze and a brand new battery

The voltage output of the alternator should be tested at the battery terminals while the engine is running. You should read output of 13.8 volts on up to maybe 14.4 volts but the value (and range, which is dependent on...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com