Chevrolet Classic Coolant Temperature Switch (Sensor) Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(88)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(88)

Coolant Temperature Switch (Sensor) Replacement Service

How much does a Coolant Temperature Switch (Sensor) Replacement cost?

On average, the cost for a Chevrolet Classic Coolant Temperature Switch (Sensor) Replacement is $118 with $23 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2005 Chevrolet ClassicL4-2.2LService typeCoolant Temperature Switch (Sensor) ReplacementEstimate$161.63Shop/Dealer Price$183.29 - $225.77
2004 Chevrolet ClassicL4-2.2LService typeCoolant Temperature Switch (Sensor) ReplacementEstimate$141.63Shop/Dealer Price$163.31 - $205.80
Show example Chevrolet Classic Coolant Temperature Switch (Sensor) Replacement prices

What is the Coolant Temperature Switch (Sensor) all about?

The coolant temperature switch, also called the coolant temperature sensor, is a switch that reads the engine coolant temperature and sends a signal to the engine control module, or ECM, to control other functions of engine operation such as the air-fuel ratio.

It is also called a switch because on some cars, it is used to turn on the engine cooling fan at a specific temperature. This aids in the engine warm-up process as well as keeping the engine at a safe operating temperature.

Keep in mind:

  • The coolant temperature switch is a crucial part of the cooling system. If faulty, it can cause severe internal engine damage due to overheating, incorrect air-fuel ratio, or incorrect ignition timing. It can also cause shorter life to the cooling fan motor or other electrical components of the cooling system.
  • Some vehicles are equipped with a separate sensor to display the engine temperature to the driver via the temperature gauge.

How it's done:

  • The Coolant Temperature Switch is verified that it needs to be replaced. The coolant is drained until the switch is exposed.

  • The defective Coolant Temperature Switch is removed by disconnecting the connector and removing it from the manifold.

  • The new Coolant Temperature Switch is installed into the mounting hole in the manifold and the electrical connector is reconnected. The coolant is then refilled.

  • The Coolant Temperature Switch is tested for operation, codes cleared, and retested to ensure all codes have been resolved.

  • The vehicle is road tested to ensure proper operation of the Cooling System.

Our recommendation:

If you suspect that your coolant temperature switch has failed, have one of our licensed mechanics come out immediately to diagnose the problem.

What common symptoms indicate you may need to replace the Coolant Temperature Switch (Sensor)?

  • Check Engine light on
  • Engine overheating
  • Cooling fan runs intermittently
  • Engine misfires, stalls, or idles roughly
  • Erratic coolant temperature

How important is this service?

This part, when faulty, could cause the fan to run intermittently or not at all, which in turns causes overheating or overuse of the cooling fan motor. Whenever overheating occurs, severe engine damage is a possibility.

The engine air-fuel ratio is what keeps it running smoothly. If the ratio gets skewed, the engine will have poor fuel economy and run poorly or not at all. The coolant temperature switch is important because it gives the ECM the information it needs to make this calculation and run the engine optimally. YourMechanic will be able to tell you if this part is performing correctly.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(88)

Rating Summary
81
3
2
1
1
81
3
2
1
1

Andrew

11 years of experience
849 reviews
Andrew
11 years of experience
Chevrolet Classic L4-2.2L - Starter - Olathe, Kansas
Andrew did a great job!

Chris

22 years of experience
2235 reviews
Chris
22 years of experience
Chevrolet Classic L4-2.2L - Car is not starting - Murrieta, California
Wow how awesome! Chris, was here much earlier then original appointment time so I appreciate that!!! he checked out my car asap knew the issue and I am scheduled for repairs and parts wed/4/14/21 with Chris so far this has been great and to have a awesome mechanic who knows what they are doing and check out your car right in front of you! I hope the up coming install and repair goes equally as well and If so I don't think I will ever go back into a shop lol Thank you!!

Emmette

36 years of experience
282 reviews
Emmette
36 years of experience
Chevrolet Classic L4-2.2L - Car is shaking or vibrating - Alexandria, Virginia
Excellent job , Emmettes..

Ben

18 years of experience
114 reviews
Ben
18 years of experience
Chevrolet Classic L4-2.2L - Timing Chain - Denver, Colorado
Great job again with Ben, Very good mechanic and I am a repeat customer.. Wonderful job done despite a huge unexpected rain storm. Thank you again!

Excellent Rating

(88)

Rating Summary
81
3
2
1
1
81
3
2
1
1
Number of Chevrolet Classic services completed
968+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1600+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Crankshaft Position Sensor
Common signs of a faulty crankshaft position sensor include issues starting the vehicle, intermittent stalling, and the Check Engine Light coming on.
How Long Does a Clutch Slave Cylinder Last?
The The clutch slave cylinder is located on the inside or outside of the transmission. If the slave cylinder is mounted on the outside of the transmission, it is normally attached by two bolts. Every time hydraulic pressure is applied,...
Minnesota Parking Laws: Understanding the Basics
Knowing Knowing how and where to park legally in Minnesota is just as important as knowing the rules of being on the road, such as the speed limits and proper signaling and lane changing procedures. If you park in the...

Car turns over but wont start. 1999 Pontiac Grand Am

Hey there. You'll need to have the fuel pressure tested also. If okay, then you need to see if your injectors are opening to supply fuel. If you have compression, fuel, and spark, then the engine should run. I recommend...

How does an adaptive transmission work

There is not a fixed end-point insofar as the "learning" or adaptive strategy. The initial "adaptation" occurs within miles but these systems typically rely on "fuzzy" logic so there are continual changes in the operation of the transmission just as...

Bad Starter?

Testing for voltage alone, or even continuity, on a circuit is not sufficient. You should test for any voltage drop in the starter circuit to be sure that there is not high resistance "somewhere" in the circuit that is causing...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com