Chevrolet Cavalier Windows Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(367)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(367)

Windows Inspection Service

How much does a Windows Inspection cost?

On average, the cost for a Chevrolet Cavalier Windows Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1985 Chevrolet CavalierL4-2.0LService typeWindows InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1993 Chevrolet CavalierL4-2.2LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1991 Chevrolet CavalierV6-3.1LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1984 Chevrolet CavalierL4-2.0LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
1985 Chevrolet CavalierV6-2.8LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2001 Chevrolet CavalierL4-2.2LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1983 Chevrolet CavalierL4-2.0LService typeWindows InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
1994 Chevrolet CavalierV6-3.1LService typeWindows InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Chevrolet Cavalier Windows Inspection prices

The windows on a car keep the interior safe, warm and dry. They allow fresh air in and make it easy to order at a drive thru window. If a window gets stuck up or down it can create a very unpleasant situation for the driver and passengers.

There can be a number of different problems with vehicle windows. The issue can vary from a blown fuse to a window switch that is not working. In some cases the glass can actually fall into the door.

Regardless of the problem, it should be fixed quickly, a malfunctioning window is not only inconvenient, it can also be dangerous.

How this system works:

Power Windows

The glass sits in a part called a regulator, which is pushed up and down by a small electric motor. The motor is attached to a worm gear and a number of spur gears, which creates a gear reduction, producing enough torque to lift the window while also keeping it level. When the window button is pushed the door module closes a relay, which then provides power to the window motor. The majority of problems with a power window are caused by the electrical system but faulty gears can also be the culprit.

Manual Windows

The glass is attached to a regulator, which is the component that pushes the window up and down. The handle sticks through the door panel and when the handle is cranked it moves the regulator up or down. Manual windows are rapidly being replaced by power windows.

Common reasons for this to happen:

  • Blown Fuse: If none of the power windows are functioning there is a good chance that the problem is a blown fuse or a bad relay. While these are two separate issues, the symptoms are often very similar. A complete inspection of the fuses and electrical system will be necessary to determine where the problem is and how to repair it.

  • Burned Out Motor: if the windows are not going up or down and there is no noise coming from the door when the switch is pressed there is a good chance the electric motor is burned out or malfunctioning. The motor will have to be replaced.

  • Power Window Regulator: If the motor is running when the switch is pressed but the window does not move, the regulator is likely damaged or malfunctioning. There are a number of parts that can break on a regulator. In this situation the regulator will have to be repaired or replaced.

  • Malfunctioning Motor: If the window is still moving up and down but very slowly, the electric motor may be malfunctioning. If it is making a whining sound this can also indicate a problem. As the motor ages it will wear out and eventually it will have to be replaced.

  • Broken Window Tracks: There are window track guides, which hold the window in place as it goes up and down. If the track guides are damaged it can cause problems with the window going up and down. Common symptoms include a slow moving window, and a rattling or grinding noise. Eventually, the window may fall inside the door.

  • Worn Window Switch: The power window switch gets used a lot and eventually it can wear out which will prevent power from going to the window. If this happens the window can end up stuck in the up or down position.

  • Bad Wiring: Wiring is integral to the operation of the power windows and if there is a short, a faulty switch or a malfunctioning relay it can bring the whole system to a halt. A professional should deal with wiring issues.

  • Broken Regulator Manual Window: If the window is starting to tilt sideways, the most likely cause is a broken regulator. The wheels on the end of a regulator will often break off which will cause the glass to tilt sideways, and eventually fall into the door.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the window issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A malfunctioning window is certainly not a life threatening situation but it can lead to interior damage and unsafe situations if the window is stuck in the down position. The flip side of that coin is a window stuck in the up position which can make it impossible to order at a drive-thru or use the window as an escape exit in the event of an emergency.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(367)

Rating Summary
345
8
5
2
7
345
8
5
2
7

Steven

14 years of experience
425 reviews
Steven
14 years of experience
Chevrolet Cavalier L4-2.2L - Car is making noise - Surprise, Arizona

Chris

22 years of experience
2229 reviews
Chris
22 years of experience
Chevrolet Cavalier L4-2.2L - Car is overheating - Laguna Beach, California
I have complete trust in Chris he is extremely knowledgeable and honest

Steven

14 years of experience
425 reviews
Steven
14 years of experience
Chevrolet Cavalier L4-2.2L - Brake Pads Replacement (Front) - Surprise, Arizona
Steven was so professional and confident in his expertise. Steven was always willing to answer all questions and gained my trust very easily. Thank you!!!!

Brian

18 years of experience
109 reviews
Brian
18 years of experience
Chevrolet Cavalier L4-2.2L - Front Crankshaft Seal Replacement - Lilburn, Georgia
He was punctual and got the job done in a timely manner.

Excellent Rating

(367)

Rating Summary
345
8
5
2
7
345
8
5
2
7
Number of Chevrolet Cavalier services completed
4037+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1600+
experts on our platform

Recent articles & questions

How to Get a Mississippi Driver's Permit
Mississippi Mississippi is one of many states that uses a graduated driver’s license program. This program requires all new drivers under 18 years old to begin driving under supervision, in order to practice safe driving before getting their full driver’s...
P0262 OBD-II Trouble Code: Cylinder 1 Injector Circuit High
P0262 means the number 1 cylinder is experiencing a draw that’s above average due to a dirty, plugged or shorted fuel injector, or electrical issues.
How to Get Smog Technician Certified in Indiana
Automotive technician jobs include smog certified emissions inspectors. In Indiana, you can be hired by CACC to perform smog inspections.

I have been working on a lexus ES350 I'm getting codes p0300 p0174 and c342d and can't figure out what the problem is, can u help?

C342d relates to faults in the throttle position sensor (TPS) or the idle air control valve (IAC). Check the wiring to the TPS sensor and the IAC valve and test for high resistances which will show up as voltage drops....

Load noise after changing belt andpully still grinding sound like its hitting something is water pump bad

My 2004 Toyota [Camry](/topics-camry/) has about 280,000 miles on it. I recently was running low on oil but it was not quite do for an oil change. so I put in a couple quarts of oil and some [engine](/topics-engine-toyota/) cleaner In it thinking that by the time the engine cleaner circulated it would B time for an oil change. I have never used the engine cleaner before. After a few days and maintenance light came on. The car stalled a few times while sitting at a light. And then today while I was driving it it made one loud pop. What should I be watching for?

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com