Chevrolet Cavalier Brake Master Cylinder Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(391)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(391)

Brake Master Cylinder Replacement Service

How much does a Brake Master Cylinder Replacement cost?

On average, the cost for a Chevrolet Cavalier Brake Master Cylinder Replacement is $243 with $103 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2002 Chevrolet CavalierL4-2.2LService typeBrake Master Cylinder ReplacementEstimate$602.42Shop/Dealer Price$693.27 - $952.05
1995 Chevrolet CavalierL4-2.2LService typeBrake Master Cylinder ReplacementEstimate$538.46Shop/Dealer Price$614.15 - $834.20
2003 Chevrolet CavalierL4-2.2LService typeBrake Master Cylinder ReplacementEstimate$587.10Shop/Dealer Price$674.99 - $931.55
2001 Chevrolet CavalierL4-2.2LService typeBrake Master Cylinder ReplacementEstimate$587.10Shop/Dealer Price$674.99 - $931.55
1992 Chevrolet CavalierV6-3.1LService typeBrake Master Cylinder ReplacementEstimate$436.27Shop/Dealer Price$512.17 - $732.38
2004 Chevrolet CavalierL4-2.2LService typeBrake Master Cylinder ReplacementEstimate$587.10Shop/Dealer Price$675.23 - $931.97
2000 Chevrolet CavalierL4-2.4LService typeBrake Master Cylinder ReplacementEstimate$587.10Shop/Dealer Price$675.02 - $931.60
1991 Chevrolet CavalierV6-3.1LService typeBrake Master Cylinder ReplacementEstimate$427.83Shop/Dealer Price$500.15 - $712.92
Show example Chevrolet Cavalier Brake Master Cylinder Replacement prices

What is the brake master cylinder and how does it work?

The brake master cylinder has a piston that pressurizes fluid in the brake lines to each wheel cylinder as you apply force to the brake pedal. That pressure moves the pistons that are in the wheel cylinders. As the pistons in those wheel cylinders move, they force the brake pads or shoes tightly against the rotors or drums allowing the car to stop quickly.

The size of the pistons in the master cylinder and in the wheel cylinders are carefully selected when designing a car. This allows drivers to apply moderate pressure on the brake pedal when stopping, but creates tremendous pressure applied at the wheel cylinders. A car can then stop quickly even at high speeds. Depending on how much force is applied to the brake pedal, the pressure in a car’s brake lines will typically be in the range of 800 PSI to 2,000 PSI.

Master Cylinder

When to replace the master cylinder?

  • External fluid leaks. There should be no fluid visible on the external surfaces of any portion of the master cylinder or the plastic fluid reservoir.
  • Low, slowly falling, or spongy brake pedal. Faulty internal seals on the piston can cause internal leaks and also seepage of brake fluid into the power assist brake booster. Internal leaks will typically be accompanied by a low pedal, a spongy brake pedal, or a pedal that slowly sinks as you maintain pressure. In all cases, you will experience reduced braking abilities.
  • Discolored brake fluid. No brake fluids, other than those specified for the year, make, and model, are fully compatible with a car’s internal rubber seals in the master cylinder. Discoloration of brake fluid can also occur due to moisture and particulate contaminants in the fluid.
  • Warning lights on the dash. If the brake system warning light illuminates, there are several potential causes but failure of the master cylinder is in the list of causes that would have to be investigated.

How do mechanics replace the brake master cylinder?

  • On vehicles with power brakes, the master cylinder is bolted to the metal housing of the power brake booster. There is usually an electrical plug connecting to a brake fluid level sensor on the master cylinder reservoir and that plug must be disconnected.
  • Once all steel brake lines are disconnected from the master cylinder, the master cylinder is unbolted from the brake booster and removed from the vehicle.
  • The new master cylinder must be bench-bled to expel air from internal passages that contain the piston. Then the new master cylinder is bolted to the brake booster and the brake lines are reattached. The electrical plug for the fluid level sensor is reconnected.
  • Whenever a new master cylinder is installed, brakes lines to wheel positions must be bled to remove air, old fluid and contaminants. If your vehicle is equipped with anti-lock brakes, the mechanic may use a bidirectional scan tool during brake bleeding to actuate the ABS pump, thus ensuring that all air is removed from the complex valving in the ABS system.
  • All brake line connections that were removed during the master cylinder replacement are inspected for any leakage and the vehicle is road tested to ensure normal operation of the brakes.

Is it safe to drive with a master cylinder problem?

No, any fault in the master cylinder, which is part of the braking system creates a safety risk. A fully operational brake system is essential to quickly stopping your car. Driving a vehicle isn’t safe, if the master cylinder is leaking or has other faults, as braking distances might be longer than normal. The braking system on a vehicle is among the most important safety systems and must be fully functional to safely drive your vehicle.

When replacing the master cylinder keep in mind:

  • The master cylinder is only one component of many in a vehicle’s braking system. During replacement of the master cylinder, all vehicle braking system components should be inspected to ensure maximum braking power is available.
  • The amount of friction material remaining on the brake pads and brake shoes should be verified.
  • Brake lines and flexible rubber hoses at each wheel position should be inspected for corrosion and deterioration.
  • The power brake booster should be evaluated to ensure that power assist is working properly.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(391)

Rating Summary
368
8
6
2
7
368
8
6
2
7

Dan

40 years of experience
1080 reviews
Dan
40 years of experience
Chevrolet Cavalier L4-2.2L - Car is overheating - Bethlehem, Georgia
Great

Les

26 years of experience
10 reviews
Les
26 years of experience
Chevrolet Cavalier L4-2.2L - Serpentine/Drive Belt - Raleigh, North Carolina
A good, honest, down home mechanic!

Paul

26 years of experience
280 reviews
Paul
26 years of experience
Chevrolet Cavalier L4-2.2L - Alternator Repair - Las Vegas, Nevada
cool

Berchel

19 years of experience
101 reviews
Berchel
19 years of experience
Chevrolet Cavalier L4-2.2L - Brake fluid is leaking - Bel Air, Maryland
Great service!

Excellent Rating

(391)

Rating Summary
368
8
6
2
7
368
8
6
2
7
Number of Chevrolet Cavalier services completed
4301+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1700+
experts on our platform

Recent articles & questions

Rules of the Road For Massachusetts Drivers
While While you may be familiar with the driving laws in your own state and those that are based on common sense, that does not mean the rules will be the same in other states. If you are planning to...
How to Buy a Good Quality AC Condenser and Condenser Fan
A A car’s air conditioning system is an orchestra of different parts working together – the compressor, condenser, accumulator or receiver dryer, expansion valve or orifice tube, and the evaporator. Each component has a specific function and if one part...
What Material for Car Hoses Is the Strongest and Most Durable?
The The heat within your engine bay is deadly – it turns rubber hoses brittle, causing them to crack and wear. Obviously, you want to use the strongest and most durable material for your engine hoses to prolong life, ensure...

Check Engine Light is On.

The transmission light flashing 16 times may be a problem with the DC solenoid for lock up and the transmission defaults to AWD causing the jerking on turns. I recommend you get a qualified mechanic check and scan the vehicle's...

The OEM tinted windows that came with my 2015 CR-V, is the tinting on the inside or the outside of the glass?

Factory tinting is on the inside of the glass (https://www.yourmechanic.com/article/how-to-clean-windows-on-a-car-by-olivia-marsh). Generally, you shouldn't use any harsh chemicals on any glass or it may etch the glass and make it unclear or cloudy. If you choose to move forward with the...

How much would it cost to have the SCR metering valve cleaned/unclogged? I have a 2011 bmw 335d and the sea light code is p20ee

Hi Zach. I've forwarded your question to our sales and service department, as this repair is not listed on our normal mobile mechanic service offerings. If we're able to offer this service, they will contact you directly via email. Thanks!...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com