Chevrolet Captiva Sport Fuel Injector Replacement Costs

Estimate price near me

Service Location

Customer Ratings

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

See availability

Customer Ratings

Fuel Injector Replacement Service

How much does a Fuel Injector Replacement cost?

On average, the cost for a Chevrolet Captiva Sport Fuel Injector Replacement is $905 with $765 for parts and $140 for labor. Prices may vary depending on your location.

Car	Service	Estimate	Shop/Dealer Price
2013 Chevrolet Captiva SportL4-2.4L	Service typeFuel Injector Replacement	Estimate$1685.12	Shop/Dealer Price$2071.25 - $3221.54
2012 Chevrolet Captiva SportV6-3.0L	Service typeFuel Injector Replacement	Estimate$2132.82	Shop/Dealer Price$2603.63 - $4008.64
2015 Chevrolet Captiva SportL4-2.4L	Service typeFuel Injector Replacement	Estimate$1967.71	Shop/Dealer Price$2425.00 - $3792.68
2012 Chevrolet Captiva SportL4-2.4L	Service typeFuel Injector Replacement	Estimate$1690.71	Shop/Dealer Price$2075.28 - $3224.40
2014 Chevrolet Captiva SportL4-2.4L	Service typeFuel Injector Replacement	Estimate$1967.71	Shop/Dealer Price$2426.47 - $3795.26

Show example Chevrolet Captiva Sport Fuel Injector Replacement prices

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(98)

Rating Summary

95

1

1

0

1

95

1

1

0

1

SEE REVIEWS NEAR ME

Andrew

16 years of experience

657 reviews

Andrew

16 years of experience

by Nathaniel

Chevrolet Captiva Sport L4-2.4L - Variable Valve Timing (VVT) Solenoid - Beaverton, Oregon

My experience was great! Andrew was very efficient in his diagnostic.

Tabitha

18 years of experience

379 reviews

Request Tabitha

Tabitha

18 years of experience

Request Tabitha

by Etta

Chevrolet Captiva Sport L4-2.4L - Car is not starting - San Diego, California

Tabitha was amazing. She explained everything so I understood the services provided.

Claud

9 years of experience

640 reviews

Claud

9 years of experience

by John

Chevrolet Captiva Sport V6-3.0L - Wheel Hub Assembly Replacement (Passenger Side Front) - Roseville, Michigan

Claudia was great! He arrived early and completed the repair in a timely manner. I had my hub assembly replaced.

Frank

9 years of experience

130 reviews

Frank

9 years of experience

by Asia

Chevrolet Captiva Sport L4-2.4L - Variable Valve Timing (VVT) Solenoid - Park Forest, Illinois

Frank arrived a few minutes early and had the job completed in less than the quoted time. He was very professional and knowledgeable! I will definitely request him again!

Excellent Rating

(98)

Rating Summary

95

1

1

0

1

95

1

1

0

1

SEE REVIEWS NEAR ME

Recent articles & questions

What Does the Hybrid Drive System Malfunction Warning Light Mean?

The hybrid drive system malfunction light turns on when an issue is detected with the system. It could be due to problem with the battery or a fuse.

10 Signs Your Car Air Conditioner Needs to Be Repaired, Replace or Recharged

How can you tell your air conditioner is broken in your car

How Long Does an Air Suspension Dryer Assembly Last?

Most Most modern cars use a system of gas-filled shocks and struts in the suspension system. Increasingly, though, vehicles are becoming equipped with air suspension systems. They are quite common in luxury cars, and also featured as upgrades on other...

My vehicle makes a clunk while accelerating.

Hi there. If your SRX is a front wheel drive model then most of the time this is caused by a failing engine or transmission mount. When these fail the engine and transmission can move when accelerating causing this noise....

Mercury Gr Marc 2001 "CHECK ENGINE" light turned on. What do I need to get checked

Hello. You'll need to attach a Diagnostic Code Reader (aka, a "scanner") to a terminal beneath the dashboard of your car, which will read out Diagnostic Trouble Codes (DTC's). These Codes usually offer critical clues as to what the underlying...

aftermarket AC installation for Jeep Renegade

Sent to CS

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com