Cadillac Catera Wheel Bearings Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(15)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(15)

Wheel Bearings Replacement Service

How much does a Wheel Bearings Replacement cost?

On average, the cost for a Cadillac Catera Wheel Bearings Replacement is $188 with $48 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1999 Cadillac CateraV6-3.0LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$250.96Shop/Dealer Price$281.25 - $357.95
1997 Cadillac CateraV6-3.0LService typeWheel Bearings - Driver Side Front ReplacementEstimate$241.95Shop/Dealer Price$269.15 - $343.53
1998 Cadillac CateraV6-3.0LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$241.95Shop/Dealer Price$269.19 - $343.60
2000 Cadillac CateraV6-3.0LService typeWheel Bearings - Driver Side Front ReplacementEstimate$241.95Shop/Dealer Price$269.19 - $343.60
1997 Cadillac CateraV6-3.0LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$241.95Shop/Dealer Price$271.77 - $348.11
1999 Cadillac CateraV6-3.0LService typeWheel Bearings - Driver Side Front ReplacementEstimate$241.95Shop/Dealer Price$269.44 - $344.03
2000 Cadillac CateraV6-3.0LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$241.95Shop/Dealer Price$269.22 - $343.65
2001 Cadillac CateraV6-3.0LService typeWheel Bearings - Driver Side Front ReplacementEstimate$241.95Shop/Dealer Price$269.19 - $343.60
Show example Cadillac Catera Wheel Bearings Replacement prices

What are wheel bearings and how do they work?

A wheel bearing assembly consists of rolling elements, such as hardened steel ball bearings or roller bearings, that roll on and around hardened steel bearing races. The wheel bearings support the front and rear axle, and all the weight of your car. Wheel bearings are made with a high-precision technique using extremely hard steel in order to withstand all the normal impacts that occur to the wheel and tire assembly as you drive along the road.

When to replace wheel bearings?

  • Growling or grinding noise from a wheel. Failed or failing wheel bearings make a very characteristic growling noise which will grow louder as the bearing wear progresses. If you believe the wheel bearing noise is coming from one side of the car, you can self-diagnosis your wheel bearing as you drive the car by loading and unloading vehicle weight You can do this by “swerving” from side-to-side. For example, if the noise markedly increases when you swerve to left, which shifts the vehicle’s weight to the right, then it often indicates the wheel bearing on the right is failing.

  • Axial or radial play in the wheel or wheel hub. Should the wheel hub move up and down or in and out, the bearing may be worn.

  • Vibration in the steering wheel or vehicle body and/or wandering. Vibration and lack of directional stability could be consequences of loose or worn out wheel bearings.

  • Tire and wheel assembly does not turn smoothly. With the wheel jacked up, and the car not in gear, the wheel should rotate smoothly. Rough or inconsistent movement, which is often accompanied by noise, can signify damaged bearings. Be sure the brakes are not dragging as you perform this check.

How do mechanics replace wheel bearings?

The complexity of wheel bearing replacement varies greatly depending on the vehicle make, model, year, the wheel position (front versus rear), and the drive type (AWD versus FWD):

  • On vehicles with unitized wheel bearing/hub assemblies, the brake rotor and caliper are removed.
  • The large axle nut is removed, the axle is pushed back through the center of the unitized hub assembly, and three (or more) bolts holding the hub assembly to the steering knuckle are removed.
  • The hub assembly is then removed from the knuckle. On installation of the new hub assembly to the knuckle, the bolts are torqued to the factory specification. In many cases, it is required to discard the old axle nut and replace with a new one. Special attention must be given to tightening the axle nut to the exact factory specification because over or under-tightening can damage the newly installed bearing. All YourMechanic professionals use calibrated torque wrenches on these critical fasteners.
  • Finally, the brake rotor and brake caliper are re-attached, the wheel installed and the car is road tested.
  • On vehicles where the wheel bearing is pressed into a cavity within the steering knuckle, the steering knuckle must be removed from the vehicle in order to press out the old bearing and press in the new bearing.
  • On some vehicles, the wheel bearing is pressed onto an axle shaft and thus the axle must be extracted from the axle carrier. This will apply to certain trucks.

Is it safe to drive with a wheel bearing problem?

No. Wheel bearing failure is usually gradual, although in some cases it starts immediately after the dramatic impact of the wheel and tire assembly with a deep pothole. Wheel bearings can sometimes make noise for quite some time before you experience a catastrophic failure that would result in complete separation of the wheel and tire assembly from the axle. Generally, the risk of sudden failure increases with the noise level. But strictly speaking, once the bearing has started to fail it is impossible to predict exactly when it will fail completely. So it should not continue to be driven. Were a failing bearing to seize or break while you are moving, you could experience loss of control of the vehicle. Once you receive a conclusive diagnostic that a wheel bearing has failed, replace the bearing promptly.

When replacing wheel bearings, keep in mind:

  • If the car has a substantial number of miles on the failed bearing (100,000 miles or more), it is a good idea to replace both bearings (driver and passenger) on the axle at the same time.
  • Wheel bearing noise can be confused with tire noise from defective tires. In difficult cases, a mechanic will apply remote wireless microphones at all 4 wheel positions, and then drive the car while listening to a remote receiver, switching between wheel positions to pinpoint the location of the failed bearing.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Cadillac mechanics

Real customer reviews from Cadillac owners like you.

Excellent Rating

(15)

Rating Summary
15
0
0
0
0
15
0
0
0
0

Ralph

39 years of experience
207 reviews
Ralph
39 years of experience
Cadillac Catera V6-3.0L - Serpentine/Drive Belt Replacement - Auburn, Washington
Excellent service. Good work and took plenty of time to discuss problem and explain solution.

Raymond

38 years of experience
613 reviews
Raymond
38 years of experience
Cadillac Catera V6-3.0L - Check Engine Light is on - North Las Vegas, Nevada
N/A

Duane

26 years of experience
589 reviews
Duane
26 years of experience
Cadillac Catera V6-3.0L - Check Engine Light is on - San Diego, California
Duane described the issues as he saw them and explained what needs fixing along with the fees.

Robert

32 years of experience
646 reviews
Robert
32 years of experience
Cadillac Catera V6-3.0L - Brake Pads Replacement (Front, Rear) - Campbell, California
Robert did a fantastic job on my bakes! Plus he did a thorough inspection of the engine . He's without a doubt a Master mechanic and I appreciate your work Robert!

Excellent Rating

(15)

Rating Summary
15
0
0
0
0
15
0
0
0
0
Number of Cadillac Catera services completed
165+
services done by our mechanics
TOTAL NUMBER OF EXPERT Cadillac MECHANICS
1000+
experts on our platform

Recent articles & questions

P0077 OBD-II Trouble Code: Intake Valve Control Solenoid Circuit High (Bank 1)
P0077 P0077 code definition Intake Valve Control Solenoid Circuit High (Bank 1) What the P0077 code means P0077 is a generic OBD2 code that is shown when there is a problem with the Bank 1 intake valve control circuit. This...
How to Purchase a Car After Filing for Bankruptcy
There There are plenty of reasons why people file for bankruptcy, but in every case the filer’s credit suffers a huge blow, making it difficult to finance big purchases. On the bright side, finding a creditor to issue a loan...
How to Diagnose a No-Spark or Loss of Power Condition on a Modern Car
Misfires caused by a loss of power condition on a car can be tricky to diagnose, but are necessary to fix to avoid further damage and costly repairs.

brake lights and turn signals on all the time and break lights don't work.

Hello. From what you describe, it appears that your vehicle may be experiencing electrical issues. If the brake lights are staying on at all times, then the first thing I would do is check the stoplight switch (https://www.yourmechanic.com/services/brake-light-switch-replacement). If it...

My battery is dead and my traction control button does not work.

The water spill onto or inside the traction control button may very well have shorted the electrical components inside the button switch. This may need to be taken apart and either replaced or cleaned out to fix. Your check engine...

why is my windows fogging up and i smell antifreeze

It has been my experience that this is normally a sign that a heater core has gone bad. It starts leaking coolant into the heater box, underneath the dash. When the heater is turned on, the air moving through the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com