Cadillac Allante Power Steering Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(15)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(15)

Power Steering Pump Replacement Service

How much does a Power Steering Pump Replacement cost?

On average, the cost for a Cadillac Allante Power Steering Pump Replacement is $246 with $106 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1993 Cadillac AllanteV8-4.6LService typePower Steering Pump ReplacementEstimate$507.82Shop/Dealer Price$592.59 - $828.47
1991 Cadillac AllanteV8-4.5LService typePower Steering Pump ReplacementEstimate$365.91Shop/Dealer Price$424.10 - $591.45
1992 Cadillac AllanteV8-4.5LService typePower Steering Pump ReplacementEstimate$365.91Shop/Dealer Price$424.14 - $591.52
1990 Cadillac AllanteV8-4.5LService typePower Steering Pump ReplacementEstimate$420.05Shop/Dealer Price$491.82 - $699.80
Show example Cadillac Allante Power Steering Pump Replacement prices

What is the power steering pump and how does it work?

The power steering pump is a belt-driven or electric-driven hydraulic pump that generates the hydraulic pressure needed to provide power steering assist. It develops output pressures of 1,000 PSI or more. The pump output is directed to the steering gear, often a rack and pinion type unit, where the hydraulic pressure pushes on the steering rack, greatly reducing the effort it would otherwise take to turn the steering wheel.

Power Steering

When to consider replacing the power steering pump:

  • Groaning or whining noise when turning. Noise can occur if there is wear on the pump bearings or impeller vanes. A low fluid level or trapped air can also cause noises. If the pump has already been operating while dry, adding fluid may not resolve the noise and replacement of the pump might be necessary.
  • Power steering fluid leaks. Leaks can develop at pump seals, threaded connections, hoses, or on the steering rack and pinion unit. Pump seal leaks will generally require a replacement.
  • Difficult steering. Should you notice it is harder to turn the steering wheel, it might mean the power steering pump output pressure is too low, or there could be blockages in the pump or lines.
  • Damage to the pump pulley. Should the pump pulley become damaged or is loose on the pump shaft, you might detect vibration, drive belt damage, or hard steering. Either the pulley will have to be serviced or the pump assembly replaced.

How do mechanics replace the power steering pump?

  • If driven by a drive belt, the power steering pump is bolted to the engine via a bracket that allows for adjustment of the pump drive belt. Once the engine is cold, and safe to work on, the drive belt is removed.
  • If driven by an electric pump, the pump may be mounted in conjunction with the steering shaft or in conjunction with the steering rack. With either a drive belt or electric pump, removal of any dash, panel, or steering components is performed to access the pump.
  • The threaded connectors to the pump inlet and outlet are loosened and removed.
  • Any mounting bolts and brackets are removed so the pump can be removed.
  • If the old pump has failed catastrophically, or there is reason to suspect contaminants in the power steering hoses, the system is flushed.
  • The new pump is bolted on, the pressure and return hoses attached and the system is bled of all air. If pump is belt-driven, it is tightened to the manufacturer’s specification.
  • Finally, the engine is run and the car is road tested to confirm normal steering effort. If a new drive belt was installed, belt tension is measured again, and adjusted as needed, after the belt has run for a few minutes.

Is it safe to drive with a power steering pump problem?

No. If the power steering pump is operated without an adequate amount of fluid, and the pump reservoir will not hold fluid due to a large leak. The pump could seize, which would snap the serpentine belt and likely leave you stranded. If the pump turns and there is adequate fluid, but there is no power assist, it will require much greater effort to turn the steering wheel, and that presents inherent safety risks. Generally, the wisest course is to seek immediate repairs if you suspect a problem with any component in your car’s power steering system.

When replacing the power steering pump keep in mind:

  • Any belts driving the pump should be inspected and replaced as needed. The pump will only produce the required hydraulic pressure if it is driven by the belt at an adequate speed.
  • Power steering leaks from aged rubber hoses, particularly where the rubber is crimped to the steel tube, are not unusual and should be carefully inspected. The system operates under high pressure. The fluid is flammable, and if leaking fluid happens to contact a hot engine part, a fire might result. You always want to be sure the hoses and connections are sound.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Cadillac mechanics

Real customer reviews from Cadillac owners like you.

Excellent Rating

(15)

Rating Summary
14
0
1
0
0
14
0
1
0
0

Manuel

13 years of experience
140 reviews
Manuel
13 years of experience
Cadillac Allante V8-4.5L - 48,000 Miles Maintenance Service - Estero, Florida
Manuel was very knowledgeable and a gentleman. Highly recommended.

Ben

42 years of experience
1589 reviews
Ben
42 years of experience
Cadillac Allante V8-4.1L - Brake System Flush - Houston, Texas
On time and good job.

Bryant

13 years of experience
638 reviews
Bryant
13 years of experience
Cadillac Allante V8-4.1L - Battery - Indianapolis, Indiana
Bryant was professional, courteous and worked diligently. I appreciated the fact that he also installed the panel over the battery area.

Peter

29 years of experience
592 reviews
Peter
29 years of experience
Cadillac Allante V8-4.6L - Check Engine Light is on - Los Angeles, California
Peter said during our initial conversation that he had worked on Northstar engines and based on the symptoms (stalling, hesitation at low RPMs), he concluded the problem was the EGR valve, and it may need to replaced. He suggested I order the part, which I did, but did not mention the accompanying gasket (which would also need to be replaced). The new EGR valve did improve the sound of the engine while idling, but the tachometer still doesn't register RPMs at low idle, and it still stalls. Thanks to the numerous attempts from my last stall, my battery is now dead. Although my gut and research says it is the Crank Position Sensor, $178 later (labor) I am back to square one, a car that won't crank.

Excellent Rating

(15)

Rating Summary
14
0
1
0
0
14
0
1
0
0
Number of Cadillac Allante services completed
165+
services done by our mechanics
TOTAL NUMBER OF EXPERT Cadillac MECHANICS
1000+
experts on our platform

Recent articles & questions

P2435 OBD-II Trouble Code: Secondary Air Injection System Air Flow/Press Sensor Circuit Bank 2
P2435 P2435 code definition The P2433 diagnostic trouble code is an indication that there is a problem with the airflow/pressure sensor circuit on Bank 2 of the secondary air injection system. Related Trouble Codes: P2430 OBD-II Trouble Code: Secondary Air...
How to Get Tax Breaks on Hybrids
When tax time descends the first quarter of each year, people scramble en masse to find any credits, deductions, or exemptions for which they qualify. Taking advantage of any tax breaks available can greatly reduce the amount of taxes paid....
How Long Does an Idler Pulley Last?
The The drive belt that is on a car runs nearly all of the major components of the engine. Most of the newer cars on the market have a serpentine belt rather than various V-belts. In order for this belt...

Key won't come out of ignition

Carmakers are required to put an interlock on their cars that prevents the key from being withdrawn from the switch unless the vehicle is in park. Some of the systems us electronic switches and actuators and some just run a...

2002 Ford Explorer stalls while driving

The steering wheel gets tight because there is no power steering without the engine running. You brake concern is similar. The brake booster, which provides braking assist, requires engine manifold vacuum to operate. Without the engine running, your brake booster...

My door handle came off. Everything seems intact. I guess it just came loose. Am I able to book an appointment to have it reinstalled?

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com