Buick Roadmaster Throttle Body Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(35)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(35)

Throttle Body Replacement Service

How much does a Throttle Body Replacement cost?

On average, the cost for a Buick Roadmaster Throttle Body Replacement is $481 with $341 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1992 Buick RoadmasterV8-5.7LService typeThrottle Body ReplacementEstimate$851.46Shop/Dealer Price$1029.18 - $1554.22
1994 Buick RoadmasterV8-5.7LService typeThrottle Body ReplacementEstimate$837.13Shop/Dealer Price$1011.75 - $1531.48
1991 Buick RoadmasterV8-5.0LService typeThrottle Body ReplacementEstimate$2376.97Shop/Dealer Price$2936.57 - $4611.20
1993 Buick RoadmasterV8-5.7LService typeThrottle Body ReplacementEstimate$842.45Shop/Dealer Price$1018.42 - $1542.16
1995 Buick RoadmasterV8-5.7LService typeThrottle Body ReplacementEstimate$837.13Shop/Dealer Price$1013.25 - $1534.10
1996 Buick RoadmasterV8-5.7LService typeThrottle Body ReplacementEstimate$828.15Shop/Dealer Price$1000.69 - $1513.81
Show example Buick Roadmaster Throttle Body Replacement prices

What is the throttle body and how does it work?

The throttle body is an air metering device mounted between the air filter and snorkel, and the intake plenum. Within the throttle body is a movable throttle plate whose position controls the amount of air that enters the engine to determine engine speed. Throttle body designs vary. Some incorporate an idle air control valve, throttle position sensor, and other electronic throttle controls. The throttle plate in the throttle body can be controlled directly by an accelerator pedal cable or fully electronically in the newest drive-by-wire systems.

When to consider replacing the throttle body:

  • Check engine light and/or reduced power warning light is on. Most modern throttle bodies have electrical components, such as a throttle position sensor. These components are monitored by the powertrain control module (PCM). If the check engine light or reduced power warning light comes on, a mechanic will determine if any of the stored trouble codes implicate a throttle body malfunction.
  • Wrong idle speed. Carbon deposits in the throttle body, particularly around the movable throttle plate or in the idle air control valve, can cause the engine idle speed to be too low or too high.
  • Poor transmission shifting. In some applications, transmission shift timing relies on signal outputs from the throttle body. If the throttle position sensor is defective, that might adversely affect shift timing and feel.

How do mechanics replace the throttle body?

  • The engine cover is removed, if necessary.
  • The flexible rubber snorkel from the air filter housing to the throttle body is disconnected. Typically, the connection is made with a large stainless steel hose clamp.
  • The electrical connections to the throttle body are removed.
  • If the throttle body is not a drive-by-wire system, the accelerator cable and cruise control cable are disconnected and set aside.
  • The bolts retaining the throttle body to the plenum, the gasket, and the throttle body are removed. If the throttle body is being cleaned and tested for re-use, approved chemicals are used in the cleaning process.
  • The new or serviced throttle body is re-attached to the plenum and the bolts torqued to factory specifications.
  • All cables and electrical connections are restored. The intake air snorkel is reconnected.
  • If applicable, the electronic throttle installation and idle re-learn procedures are performed using an appropriate scan tool.
  • Finally, the engine is started, brought to normal operating temperature, and idle speed is checked. The car is road tested to ensure normal operation and no illumination of warning or service lights.

Is it safe to drive with a throttle body problem?

Yes. But, the vehicle may be limited in power or put into what is referred to as limp mode, in order to get the vehicle to a repair facility. If the check engine light is on, or the electronic throttle control warning light is on, but there is no noticeable difference in engine performance, the car can be safely driven. However, it is best to have it diagnosed and repaired at your earliest convenience to avoid unexpected breakdown or possible damage to the catalytic converter.

When replacing the throttle body keep in mind:

  • Many modern throttle bodies have spring loaded sensors and plastic gears that are not intended to be manipulated directly during any diagnostics or inspections. These components are controlled electronically or generate signals. It is best to let a mechanic use approved tests to diagnose the problem.
  • Wiring faults, bad grounds, or bad terminal connections can make it appear as though an electronically controlled throttle has failed. A mechanic will always rule out all other causes before replacing the throttle body.
  • When cleaning the throttle body, special care should be taken to use only special spray cleaners designed to not damage electrical components or sensors.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Buick mechanics

Real customer reviews from Buick owners like you.

Excellent Rating

(35)

Rating Summary
31
2
0
1
1
31
2
0
1
1

Chris

23 years of experience
2372 reviews
Chris
23 years of experience
Buick Roadmaster V8-5.7L - Water Pump - Costa Mesa, California
Chris was very professional, arrived early, and did an excellent job on my repairs. I would recommend Chris without hesitation.

Damian

12 years of experience
430 reviews
Damian
12 years of experience
Buick Roadmaster V8-5.7L - Crankshaft Harmonic Balancer - Cocoa, Florida
Competent and quick

Tam

23 years of experience
251 reviews
Tam
23 years of experience
Buick Roadmaster V8-5.7L - Oil Change - San Francisco, California
tam is an extradinary person..extremly professional, courteous and super kool...!

Trung

13 years of experience
412 reviews
Trung
13 years of experience
Buick Roadmaster V8-5.7L - Inspection Service - Sunnyvale, California
great full for their professional manner.

Excellent Rating

(35)

Rating Summary
31
2
0
1
1
31
2
0
1
1
Number of Buick Roadmaster services completed
385+
services done by our mechanics
TOTAL NUMBER OF EXPERT Buick MECHANICS
800+
experts on our platform

Recent articles & questions

P0274 OBD-II Trouble Code: Cylinder 5 Injector Circuit High
P0274 P0274 code definition P0274 is a trouble code that denotes an above average draw of current from the number five cylinder’s fuel injector. What the P0274 code means If you see this code, it means your vehicle’s engine cylinder...
P2572 OBD-II Trouble Code: Direct Ozone Reduction Catalyst Deterioration Sensor Circuit 4
What What the P2572 code means? P2572 is an OBD-II generic code for the engine control module (ECM) detecting the ozone reduction catalyst has deteriorated or the sensor has failed. Some problems may be from a defective regeneration system on...
P2093 OBD-II Trouble Code: A Camshaft Position Actuator Control Circuit High Bank 2
P2093 P2093 code definition The P2093 code is a general OBD-II diagnostic trouble code indicating a fault with the “A” camshaft position actuator control circuit high bank 2. What the P2093 code means The camshaft position sensor “A” is indicating...

Belt or tensioner squeaking.

This issue could be either part or the need to replace both. The belt if worn could cause the noise. The tensioner may not provide enough tension and could be the problem/. If the tensioner is bad then it is...

Lights, radio, windows not working, SRS light on, car runs very rough

This is likely either a dead battery (https://www.yourmechanic.com/services/battery-replacement) or a battery connection (https://www.yourmechanic.com/services/battery-cable-replacement) problem. Try checking (https://www.yourmechanic.com/article/how-to-check-a-car-battery) the battery ground (black cable opposite end of the battery connection) to be sure is properly connected to the chassis of the car....

MAP sensor failure

Hi There, As you may know, the MAP sensor uses engine vacuum to work properly and without that vacuum the sensor is reading barometric pressure or outside atmospheric pressure. When this happens, the result is typically a broken vacuum line...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com