Buick Rendezvous Headlight Bulb Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(186)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(186)

Headlight Bulb Replacement Service

How much does a Headlight Bulb Replacement cost?

On average, the cost for a Buick Rendezvous Headlight Bulb Replacement is $155 with $15 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2002 Buick RendezvousV6-3.4LService typeHeadlight Bulb - Driver Side High Beam ReplacementEstimate$185.60Shop/Dealer Price$196.85 - $222.50
2007 Buick RendezvousV6-3.5LService typeHeadlight Bulb - Driver Side High Beam ReplacementEstimate$176.59Shop/Dealer Price$186.07 - $210.40
2005 Buick RendezvousV6-3.4LService typeHeadlight Bulb - Driver Side Low Beam ReplacementEstimate$176.59Shop/Dealer Price$186.10 - $210.44
2005 Buick RendezvousV6-3.6LService typeHeadlight Bulb - Passenger Side High Beam ReplacementEstimate$176.59Shop/Dealer Price$186.10 - $210.44
2007 Buick RendezvousV6-3.5LService typeHeadlight Bulb - Passenger Side Low Beam ReplacementEstimate$176.59Shop/Dealer Price$187.57 - $213.02
2003 Buick RendezvousV6-3.4LService typeHeadlight Bulb - Passenger Side Low Beam ReplacementEstimate$176.59Shop/Dealer Price$186.24 - $210.69
2002 Buick RendezvousV6-3.4LService typeHeadlight Bulb - Passenger Side Low Beam ReplacementEstimate$176.59Shop/Dealer Price$186.11 - $210.47
2004 Buick RendezvousV6-3.4LService typeHeadlight Bulb - Driver Side High Beam ReplacementEstimate$176.59Shop/Dealer Price$186.10 - $210.44
Show example Buick Rendezvous Headlight Bulb Replacement prices

What are headlight bulbs and how do they work?

Headlight bulbs are encased in a carefully designed housing that illuminates the roadways and makes your car visible to other drivers and pedestrians. They rely on the vehicle’s electrical system for power. There are many types of headlight bulbs in use today including sealed beams, halogen plug-in bulbs, LED (light emitting diode), and HID (high intensity discharge) bulbs. Some car models are sold with headlight options and a mechanic may rely on your car’s VIN to determine the type of headlight system in your vehicle.

All headlamps rely on reflectors in the lamp housing to focus the headlight bulbs. This allows the most useful pattern of light to be cast onto the roadway. Halogen bulbs have a gas that allows for additional light. HID bulbs use two electrodes within the bulb that charge the gas to produce the light. LED bulbs operate at a lower temperature and the light shown on the road tends to be lower than HID bulbs. All headlights are designed to provide a well lit driving path when natural sunlight is not enough.

When to replace headlight bulbs?

  • Bulb is blown out. All of the various headlight bulb types are replaced if the bulb itself has failed. This is the most common scenario.
  • Bulb has dimmed. Some bulb types, particularly halogen bulbs, will produce significantly less light output as the bulb filament ages from use. LED and HID lighting do not dim with age and thus are generally only serviced if the light source has failed.
  • Headlight circuit fails. Note that in some cases, the bulbs are not the underlying issue that leads to the need for replacements. Instead wiring to the bulb, terminal connections, bulb sockets, and system components could be the underlying problem.

How do mechanics replace headlight bulbs?

  • Halogen bulbs and sealed beams, which are generally modular plug in components, are accessible once the hood is raised.
  • The replacement procedure for LED and HID bulbs will depend on whether the light source itself is faulty or if it’s a component in the circuit. Removal procedures for sophisticated HID and LED systems vary by car model and mechanics follow the repair procedures in the factory service manual for your model.
  • For all bulb types, wiring and bulb sockets must be carefully inspected when replacing bulbs to ensure that the electrical connections are complete and secure.
  • Finally, the installed newly bulbs are turned on to ensure normal operation.

Is it safe to drive with a headlight problem?

Headlights must always be fully functional after dusk to drive safely. Should your car have a failed headlight and is driven only when there is adequate daylight, you can put off the repair until it is convenient. Working headlights are required by law in throughout the U.S. whenever the car is used on public roads from sunset to sunrise and in many other specified conditions as well, such as when it is raining or when visibility is reduced due to smoke, fog, or other factors.

When replacing headlights keep in mind:

  • If a bulb does not have a visible filament that can inspected and tested, a mechanic might first test to see if there is power to the bulb. This is most applicable if your car has LED or HID lighting, which can fail if electronics in the circuit is faulty.
  • Halogen lamps and sealed beams should be replaced in pairs so that illumination levels are equal on both sides of the car.
  • Plastic lenses on many headlights degrade over time. Should there not be any issues with the bulbs, these can be replaced to restore your vehicle’s lighting system to a like new condition.
  • The condition of bulb sockets, the ground connection, fuses, and all components of the headlight circuit are important to proper and reliable functioning of the headlights and a mechanic should consider those aspects.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Buick mechanics

Real customer reviews from Buick owners like you.

Excellent Rating

(186)

Rating Summary
174
4
1
2
5
174
4
1
2
5

Eduardo

15 years of experience
528 reviews
Eduardo
15 years of experience
Rendezvous 2006 - Brake System Flush - Houston, TX
Very professional

Eduardo

15 years of experience
528 reviews
Eduardo
15 years of experience
Rendezvous 2006 - Power Steering Return Hose - Houston, TX
Very professional

Yoel

5 years of experience
187 reviews
Yoel
5 years of experience
Rendezvous 2006 - Valve Cover Gasket - Philadelphia, PA
Always Goes Out And Beyond !! I Highly Recommend Yoel For Reliable Service !!!!

Yoel

5 years of experience
187 reviews
Yoel
5 years of experience
Rendezvous 2006 - Cooling System Flush - Philadelphia, PA
Always Goes Out And Beyond !! I Highly Recommend Yoel For Reliable Service !!!!

Excellent Rating

(186)

Rating Summary
174
4
1
2
5
174
4
1
2
5
Number of Buick Rendezvous services completed
2046+
services done by our mechanics
TOTAL NUMBER OF EXPERT Buick MECHANICS
800+
experts on our platform

Recent articles & questions

What Is Brake Dust?
It's It's time to wash the car, but when you get to the wheels they are covered by a hard to remove gray dust. Even after you clean it off, it comes back quickly. Welcome to the world of brake...
Child Seat Safety Laws in Oregon
Children Children travelling in motor vehicles are highly vulnerable, and most injuries and fatalities involving children who are in collisions are due to failure on the part of the driver to ensure that they are properly restrained. The laws covering...
B1984 OBD-II Trouble Code: Seat Switch Lumbar Inflate Circuit Failure
B1984 means there is an issue with the lumbar inflate circuit in the seat switch. This is most likely due to a faulty electrical component.

Engine cuts off and electrical components malfunction - 1995 Oldsmobile Delta 88

Relays provide for managed power distribution. A chattering relay is a failure mode where the electrical contacts are burned and aren't delivering power. I would have a professional mechanic identify which relay is chattering and determine how relevant that relay...

Want to know which Japanese Alto is good? Which grade is good like E or F? Suzuki Alto

Hello - since these are models we don't see here in N America, we have less information to pull from. However, our friends at TopGear don't rate it very highly, and suggest comparing the Alto to the Nissan Pixo. If...

Motor Locked up

Check to see if the starter motor pinion gear is jammed in the ring gear on the flex plate. On the off chance that somehow the transmission is the issue, you can also try disconnecting the torque converter from the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com