Buick Reatta Exhaust Gas Recirculation (EGR) Tube Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(7)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(7)

Exhaust Gas Recirculation (EGR) Tube Replacement Service

How much does a Exhaust Gas Recirculation (EGR) Tube Replacement cost?

On average, the cost for a Buick Reatta Exhaust Gas Recirculation (EGR) Tube Replacement is $214 with $119 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1989 Buick ReattaV6-3.8LService typeExhaust Gas Recirculation (EGR) Tube ReplacementEstimate$352.99Shop/Dealer Price$422.49 - $608.49
1991 Buick ReattaV6-3.8LService typeExhaust Gas Recirculation (EGR) Tube ReplacementEstimate$332.99Shop/Dealer Price$402.51 - $588.52
1988 Buick ReattaV6-3.8LService typeExhaust Gas Recirculation (EGR) Tube ReplacementEstimate$332.99Shop/Dealer Price$402.51 - $588.52
1990 Buick ReattaV6-3.8LService typeExhaust Gas Recirculation (EGR) Tube ReplacementEstimate$332.99Shop/Dealer Price$402.49 - $588.48
Show example Buick Reatta Exhaust Gas Recirculation (EGR) Tube Replacement prices

What is the Exhaust Gas Recirculation (EGR) Tube all about?

The EGR (Exhaust Gas Recirculation) valve helps lower the car’s exhaust emissions (gases from the tailpipe). It recirculates a portion of the gasses coming out of the engine by putting them back into the intake manifold, where the engine can burn them again, reducing emissions.

Most engines require exhaust gas recirculation to meet emissions standards. If the EGR valve has gone bad, the car will most likely not pass an emissions test.

Keep in mind:

During the EGR valve replacement, your mechanic should also inspect the vacuum hoses connected to the EGR valve. If the vacuum hoses are cracked (leaking), EGR valve will not function properly.

How it's done:

  • Scan the computer system in the car.
  • Check all vacuum related hoses to EGR valve.
  • Test EGR transducer.
  • Verify the EGR port is not clogged.
  • Remove and replace the EGR valve and gasket.
  • Clear the trouble codes and test for proper operation of EGR valve.

Our recommendation:

It is a good idea to get an air induction (carbon cleaning) service performed every 50,000 miles. This should clean out any sludge or carbon build-up in the air intake system. Always keep up with the regular oil changes; it will help prevent sludge build-up in the engine.

What common symptoms indicate you may need to replace the Exhaust Gas Recirculation (EGR) Tube?

  • Check Engine light is on.
  • Engine rattles during acceleration.
  • Engine has trouble idling.

How important is this service?

Your engine is not as efficient as it can be, which is why you have an EGR valve. The EGR valve takes a portion of the gas that your engine is excreting, and recirculates it through the intake manifold. The intake manifold then sends the gas back to the engine, where it is used again to power your vehicle. The tube is a key part of the EGR valve, and when the tube fails, the EGR valve will fail to do its job. As a result, your vehicle will not recirculate or recycle any of the excess gas from the engine, and you will get worse gas mileage and possibly fail emissions standards.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Buick mechanics

Real customer reviews from Buick owners like you.

Excellent Rating

(7)

Rating Summary
7
0
0
0
0
7
0
0
0
0

Stephen

25 years of experience
48 reviews
Stephen
25 years of experience
Buick Reatta V6-3.8L - Parking / Emergency Brake does not work - Summerville, South Carolina
Very well informative and descriptive mechanic

Miguel

21 years of experience
232 reviews
Miguel
21 years of experience
Buick Reatta V6-3.8L - Battery - Ramsey, New Jersey
Nice gentleman. Work was done correctly.

Chris

22 years of experience
2229 reviews
Chris
22 years of experience
Buick Reatta V6-3.8L - 75 Point Safety Inspection - Corona Del Mar, California
Very impressed with the concept and professionalism of yourmechanic staff.

Andrew

9 years of experience
41 reviews
Andrew
9 years of experience
Buick Reatta V6-3.8L - Brake Pads Replacement (Front, Rear) - Houston, Texas
On time and warm and friendly took care of repairs within short time frame.

Excellent Rating

(7)

Rating Summary
7
0
0
0
0
7
0
0
0
0
Number of Buick Reatta services completed
77+
services done by our mechanics
TOTAL NUMBER OF EXPERT Buick MECHANICS
800+
experts on our platform

Recent articles & questions

Top 10 Scenic Drives in Alabama
Alabama is a place rich in Southern culture and natural wonders, with terrain that varies from deep canyons to flat fields that reach as far as the eye can see. It is also full of sites of historic interest with...
Wisconsin Speed Limits, Laws, and Fines
Following Following is an overview of the laws, limits, and fines as they relate to speeding traffic violations in the state of Wisconsin. Speed limits in Wisconsin 70 mph: interstates, expressways, and some four-lane highways 65 mph: some urban freeways...
B1929 OBD-II Trouble Code: Air Bag Safing Sensor Output Circuit Open
B1929 means there is an issue with a circuit in the airbag system's safing sensor, possibly due to faulty electrical wiring.

Little bit of crankshaft wobble

After watching the video myself, I can say that you have no problems to worry about. The crankshaft is not bent. The wobble is in the front crankshaft pulley. The outer pulley is mounted to the inner hub by rubber...

Need to replace the alternator in my 2000 Nissan Pathfinder and have no clue what brand to get. 2000 Nissan Pathfinder

Hi there - Denso and Bosch are original equipment suppliers for Nissan. These may be purchased as "rebuilt" or "remanufactured" at lower prices than new, or Nissan-branded parts from a number of quality parts supplier. "Less expensive" may only consider...

2006 Toyota Matrix fuel pump plastic lock ring stuck. Universal removal tool is crap. Help. Frustrated.

Many times there is what is called a spanner wrench that is used to remove fuel pump lock rings. If you are unable to get one of those, a hammer and chisel is your next best option. You could also...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com