Buick Lucerne Car Starter Repair at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(4)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(4)

Car Starter Repair Service

How much does a Car Starter Repair cost?

On average, the cost for a Buick Lucerne Car Starter Repair is $313 with $173 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2008 Buick LucerneV6-3.8LService typeCar Starter RepairEstimate$500.54Shop/Dealer Price$590.53 - $852.38
2011 Buick LucerneV6-3.9LService typeCar Starter RepairEstimate$620.09Shop/Dealer Price$733.51 - $1068.84
2006 Buick LucerneV6-3.8LService typeCar Starter RepairEstimate$491.53Shop/Dealer Price$579.77 - $840.32
2010 Buick LucerneV8-4.6LService typeCar Starter RepairEstimate$957.38Shop/Dealer Price$1141.31 - $1686.39
2009 Buick LucerneV6-3.9LService typeCar Starter RepairEstimate$620.09Shop/Dealer Price$735.31 - $1071.98
2008 Buick LucerneV8-4.6LService typeCar Starter RepairEstimate$957.38Shop/Dealer Price$1141.53 - $1686.78
2007 Buick LucerneV6-3.8LService typeCar Starter RepairEstimate$491.53Shop/Dealer Price$579.79 - $840.35
2010 Buick LucerneV6-3.9LService typeCar Starter RepairEstimate$620.09Shop/Dealer Price$733.54 - $1068.89
Show example Buick Lucerne Car Starter Repair prices

What's a car starter motor and how does it work?

The starter motor is a powerful, compact electric motor that will turn a car’s engine over at about 200 RPM in order to start the engine. The starter is at the terminus of a circuit that includes the battery, the ignition switch, a neutral safety switch, relays and fuses.

When you turn the ignition key to start, or press the start button in some vehicles, the starter circuit is completed and the starter will run. Most starters have a small pinion gear that engages a larger ring gear on the flywheel when the starter is powered on. The pinion gear turns the engine flywheel at about 200 RPM. Since the flywheel is directly connected to the crankshaft, all engine components will then turn in sync and the engine starts.

Starter

When to replace the starter?

Starters are relatively durable but most will eventually fail in one or more of the following ways:

  • Intermittent operation of the starter. Starters can develop bad spots on the armature which will cause intermittent operation. This causes the starter to work sometimes and other times when you turn the key nothing happens.
  • Starter turns too slowly. Internal electrical and mechanical faults can cause the starter to draw too much current and in some cases the current drawn will exceed what the battery can supply. A consequence is the engine may not start as rapidly.
  • Unusual noises on starting. If you hear any type of grinding or other unusual noise while starting the engine, that should be investigated as the noise could reflect an internal starter failure or the noise could be due to pinion gear failure or flywheel ring gear damage.
  • Starter doesn’t function when turning the key. In some cases, the first symptom of a starter malfunction is a complete failure of the starter motor. This happens when you turn the ignition key to start the car, the starter motor does not function at all.

How do mechanics repair the starter?

  • If the starter is determined to be faulty, the battery must be disconnected prior to commencing any work. Once the battery is disconnected, the wiring to the starter is disconnected.
  • Starters are bolted to the engine block or the transmission case. Generally, there are two bolts. The procedure to access the starter varies across car models and can require removal, or lowering, of other vehicle components.
  • Once the starter is removed and a new starter is installed, the mounting bolts are tightened to the OEM factory torque specifications, the electrical connections are cleaned and re-attached to the starter and the starter is tested to confirm normal operation.

Is it safe to drive with a starter problem?

Once a vehicle engine is running, the starter is not in use. However, if you know that the starter is malfunctioning or working intermittently, you may be left stranded if you turn the engine off and the starter doesn’t function when restarting the engine. Should you know or suspect a problem with the starter, it is best to have the problem repaired to avoid being left stranded.

When replacing a faulty starter keep in mind:

  • Prior to replacing the starter, simple diagnostic tests should be performed to ensure that the problem is a faulty starter versus a weak battery, faulty neutral start switch, or other faulty electrical component in the starter motor circuit.
  • Starters draw large amounts of current from the battery, much more than any other electrically powered device in your car. This makes it important that the electrical connections to the battery are inspected, cleaned, and tightened as necessary. Cables to the starter should also be inspected for corrosion and replaced as needed.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Buick mechanics

Real customer reviews from Buick owners like you.

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0
Number of Buick Lucerne Car Starter Repair services completed
44+
services done by our mechanics
TOTAL NUMBER OF EXPERT Buick MECHANICS
800+
experts on our platform

Recent articles & questions

P2651 OBD-II Trouble Code: B Rocker Arm Actuator Sys Perf or Stuck Off Bank1
P2651 means an electrical circuit that is short or open in the rocker arm actuator control circuit due to low engine oil or an open circuit.
How to Register a Car in Florida
All All vehicles must be registered through Florida’s Department of Highway Safety and Motor Vehicles (DHSMV) or through eTags, which is an online registration system approved by the state. If you are new to Florida, you have 10 days to...
Rules of the Road For Arkansas Drivers
Every Every time you are on the road, there are a variety of rules that you must follow. Some are common sense, while others are mandated by the state in which you live. However, if you are traveling through your...

Oil pressure dropped to zero

The engine would need to be diagnosed to find the reason for it to seize up. The oil pressure dropping to zero is an indication that the oil pump may have failed, and starved the engine bearings of oil. If...

excessive fuel consumption?

EPA ratings for this vehicle are stated in units of miles and gallons. The city driving rating for the vehicle is 22 MPG (miles per gallon). The highway driving rating is 32 MPG. Your experience is reported as 15 MPG...

can the emergency break "seize up" and cause a screeching sound even when the hand break isn't engaged? this is a 2004 Toyota Cor

If you have not touched the emergency brake, it cannot activate or seize on its own. The emergency brake mechanism, if not regularly used, will tend to get corroded and sticky but if you have not used it prior to,...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com