Buick Electra Camshaft Position Sensor Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(19)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(19)

Camshaft Position Sensor Replacement Service

How much does a Camshaft Position Sensor Replacement cost?

On average, the cost for a Buick Electra Camshaft Position Sensor Replacement is $187 with $47 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1990 Buick ElectraV6-3.8LService typeCamshaft Position Sensor ReplacementEstimate$249.50Shop/Dealer Price$276.73 - $350.30
Show example Buick Electra Camshaft Position Sensor Replacement prices

What is the Camshaft Position Sensor all about?

The camshaft position sensor monitors the position of the camshaft and reports that data to the car’s onboard computer system. This computer system works with sensors and other devices to keep the engine running. With data from the camshaft position sensor (CPS), the fuel injectors know when to fire.

When the sensor malfunctions, the computer does not know when to fire the injectors and may not fire them at all. The faulty readouts may also throw off spark timing, which will affect the car’s fuel economy. This sensor is used in conjunction with the crankshaft position sensor to control ignition timing. It is common for heat and oil leaks to cause this sensor to fail, due to where the sensor is located.

Keep in mind:

  • Damage to the camshaft position sensor is often caused by oil leaks; if this is the case, you may need another part of your car replaced or repaired.
  • When the camshaft position sensor is replaced, the alignment of the timing belt should be monitored so that no fluids leak onto the position sensor mounting area.
  • Some camshaft position sensors will need to have their software updated when they are installed.
  • Timing belts, mass air flow sensors, and crankshaft position sensors can all trigger the trouble code for the camshaft position sensor.

How it's done:

  • Scan test computer for trouble codes.
  • Pinpoint tests as per flow charts.
  • Remove and replace Crankshaft Position Sensor.
  • Clear trouble codes.
  • Check for proper operation and test drive car.

Our recommendation:

The camshaft position sensor isn’t checked in most regular services, but your vehicle has warning signs for when the sensor begins to fail. Because it sends information to the camshaft, when the sensor begins to fail your engine will begin to have trouble. Your engine may have a hard time turning on, staying on, idling, or running smoothly. Your Check Engine warning light should illuminate as well.

What common symptoms indicate you may need to replace the Camshaft Position Sensor?

  • Car stalls or does not start.
  • Car struggles to accelerate (does not maintain speed).
  • Check Engine light is on.
  • Car misfires.
  • Car stumbles or sputters on startup.
  • Car runs poorly or runs rough.

How important is this service?

The camshaft position sensor provides valuable information about the camshaft position to the computer management system. The computer system uses the information from the position sensor to determine when to inject more fuel. Without the sensor’s information, the computer won’t inject fuel properly, and your vehicle will stall or sputter.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Buick mechanics

Real customer reviews from Buick owners like you.

Excellent Rating

(19)

Rating Summary
19
0
0
0
0
19
0
0
0
0

David

26 years of experience
180 reviews
David
26 years of experience
Buick Electra V6-3.8L - Drive Belt Tensioner - Ocala, Florida
This is the second time I have had David come out to work on my car. Work was completed in a timely manner and what was done was described in detail to my satisfaction. I would recommend David to anyone who needs and honest evaluation of the work that will be needed to make any fix necessary to their car.

Andrew

15 years of experience
141 reviews
Andrew
15 years of experience
Buick Electra V8-6.6L - Heater is not working - Puyallup, Washington
He is one of the best mechanics I ever had thanks

John

37 years of experience
565 reviews
John
37 years of experience
Buick Electra V6-3.8L - Parking brake won't engage - Roseville, California
John is experienced with older cars. Great job and explained what the problem was and what could be done about it.

Chris

7 years of experience
105 reviews
Chris
7 years of experience
Buick Electra V8-6.6L - Electrical components are not working Inspection - Conyers, Georgia
Chris was great and extremely helpful.

Excellent Rating

(19)

Rating Summary
19
0
0
0
0
19
0
0
0
0
Number of Buick Electra services completed
209+
services done by our mechanics
TOTAL NUMBER OF EXPERT Buick MECHANICS
800+
experts on our platform

Recent articles & questions

How to Replace a Crankshaft Position Sensor
The crankshaft position sensor, along with the camshaft sensor, helps the vehicle determine top dead center, among other engine management tasks.
How Long Does a Speedometer Sensor Last?
While While a mechanical speedometer will use a speedometer cable attached to the driveshaft and transmission, that’s not the case with an electronic speedometer, such as is used in most modern vehicles. These use a speedometer sensor. It’s mounted to...
Symptoms of a Bad or Failing Throttle/Accelerator Pedal Position Sensor
Common signs of a faulty pedal position sensor include inconsistent engine response, reduced fuel efficiency, and the Check Engine Light coming on.

Difficult startup with a lot of idling when it's cold

One of the main things that can prevent a vehicle from starting in the cold is the battery. Batteries for automobiles are rated by cold cranking amps. This measurement is the amount of amperage the battery can produce at zero...

The Adaptive stability control went out on my car I took it to a local mechanic he said he thinks the throttle is going bad he unh

Unfortunately, the cause of your concern cannot be determined without visual inspection and further testing. While it is possible that your throttle position sensor may be faulty (https://www.yourmechanic.com/services/throttle-position-sensor-replacement), it is more than likely that it could be a wheel speed...

Is it the part or a deeper problem when the camshaft position sensor error displays after replacement

As a technician, anytime two sensors fail at once, I suspect there is something that both these sensors have in common. This common item is the likely point of failure. It is unlikely that two sensors would fail at the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com