Buick Allure Car Thermostat Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(34)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(34)

Car Thermostat Replacement Service

How much does a Car Thermostat Replacement cost?

On average, the cost for a Buick Allure Car Thermostat Replacement is $223 with $83 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2008 Buick AllureV6-3.8LService typeCar Thermostat ReplacementEstimate$336.52Shop/Dealer Price$381.99 - $509.47
2010 Buick AllureL4-2.4LService typeCar Thermostat ReplacementEstimate$423.85Shop/Dealer Price$491.68 - $690.64
2009 Buick AllureV8-5.3LService typeCar Thermostat ReplacementEstimate$359.47Shop/Dealer Price$411.23 - $561.93
2008 Buick AllureV6-3.6LService typeCar Thermostat ReplacementEstimate$422.87Shop/Dealer Price$490.48 - $688.72
2007 Buick AllureV6-3.8LService typeCar Thermostat ReplacementEstimate$311.91Shop/Dealer Price$356.72 - $483.66
2009 Buick AllureV6-3.8LService typeCar Thermostat ReplacementEstimate$326.61Shop/Dealer Price$370.31 - $496.48
2010 Buick AllureV6-3.0LService typeCar Thermostat ReplacementEstimate$395.73Shop/Dealer Price$456.57 - $634.48
2010 Buick AllureV6-3.6LService typeCar Thermostat ReplacementEstimate$422.87Shop/Dealer Price$490.48 - $688.72
Show example Buick Allure Car Thermostat Replacement prices

What is an engine cooling system thermostat and how does it work?

The car's engine cooling system thermostat is a small valve within a cooling system passageway that opens and closes in response to the temperature of the circulating engine coolant. When your car is first started and the coolant is cold, the valve in the thermostat will be in the closed position, circulating the coolant flow only within the engine instead of flowing to the radiator, which allows the engine to warm up fast, promoting fuel efficiency, low emissions, and reduced engine deposits. Once the engine coolant reaches the design temperature, usually around 195 degrees, the valve will open and close as you drive in order to maintain a coolant temperature typically between 195 to 225 degrees Fahrenheit.

Thermostat

When to consider replacing the engine cooling system thermostat:

  • Engine overheats. A thermostat with the valve stuck closed is a common cause of engine overheating. However, since there are other causes of overheating, a mechanic will thoroughly inspect the cooling system prior to condemning the thermostat. Since it is usually not known how badly the engine overheated, the mechanic will also try to determine if there is evidence that the cylinder head gasket was blown. If so, it would be repaired prior to replacing the thermostat.
  • Temperature gauge reads too low or too high. Thermostats can get sticky, causing the engine temperature to stray from the optimal range. Your dash-mounted temperature gauge will notify you of this malfunction.
  • Cooling system repairs. All thermostats eventually fail. Therefore, if the cooling system is already open for major repairs, such as water pump or radiator replacement, it is recommended to install a new thermostat simply as insurance against future breakdown.

How do mechanics replace the engine cooling system thermostat?

  • Once the engine is completely cold, the radiator cap is loosened and enough coolant is drained from the radiator so the coolant level is below the thermostat housing.
  • The thermostat housing is removed and the thermostat and gasket are extracted. Note that some cars have more than one cooling system thermostat and both might need replacement.
  • All mounting surfaces on the thermostat housing are cleaned of old gasket material. A new gasket is applied and the thermostat is re-installed in the correct orientation and with the temperature sensing cylinder facing downward towards the engine.
  • The thermostat housing bolts are tightened to original equipment manufacturer (OEM) specifications using a calibrated inch-pound torque wrench.
  • The cooling system is refilled with the appropriate coolant type and the system is fully bled of all air.
  • The car engine is run until the normal operating temperature is reached, and while taking precautions with the hot coolant, the coolant level is rechecked while confirming there is flow through the radiator — either visually or with an infrared temperature gun. This will confirm the thermostat is open. Finally, the engine is checked for leaks.

Is it safe to drive with an engine cooling system thermostat problem?

No. If it has been determined that there is a thermostat problem, it should be repaired right away. Failure to do so can cause substantial and costly damage to the engine.

When replacing the engine cooling system thermostat keep in mind:

  • Engine overheating due to causes other than a faulty thermostat, will themselves damage a thermostat. Therefore, always replace the thermostat if the engine overheats, even if the thermostat was not the initial cause of the overheating.
  • The thermostat should be replaced anytime you have major work done on the coolant system. It is convenient and costs little during such repairs and insurance against future breakdown.
  • OEM thermostats are the best ones to use and you can request your mechanic to install only the OEM thermostat. Dealer supplied, OEM thermostats are sometimes more costly but are generally higher quality and specifically engineered for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Buick mechanics

Real customer reviews from Buick owners like you.

Excellent Rating

(34)

Rating Summary
33
1
0
0
0
33
1
0
0
0

Chad

17 years of experience
76 reviews
Chad
17 years of experience
Buick Enclave V6-3.6L - Thermostat - Richmond, Virginia
I use him a lot!

Ricardo

15 years of experience
339 reviews
Ricardo
15 years of experience
Buick LeSabre V6-3.8L - Thermostat - Venice, California
Did everything to get the job done correctly, despite some parts set backs.

John

20 years of experience
138 reviews
John
20 years of experience
Buick LaCrosse V6-3.8L - Thermostat - Round Rock, Texas
All I can say is John is the man. Very professional. Thank you.

Martin

30 years of experience
166 reviews
Martin
30 years of experience
Buick LaCrosse V6-3.8L - Car Thermostat Replacement - Antioch, Tennessee
Prompt, courteous, professional.... Will be using this service again because Martin did a great job.

Excellent Rating

(34)

Rating Summary
33
1
0
0
0
33
1
0
0
0
Number of Buick Car Thermostat Replacement services completed
374+
services done by our mechanics
TOTAL NUMBER OF EXPERT Buick MECHANICS
800+
experts on our platform

Recent articles & questions

Industry News for Automotive Techs: September 24-30
Uber enters trucking market, Land Rover takes autonomous off road, and VW introduces a long range electric concept.
The Safest Ways to Use Your Car Mirrors
The rearview and sideview mirrors are among the most important safety features in your car. Adjust your mirrors correctly to stay safe on the road.
How to Buy a Good Quality Cylinder Head
The The cylinder head is one of the single most critical parts of your car’s mechanics, and one part that can trigger the most engine damage if it becomes compromised. The cylinder head, along with the head gasket, sits on...

Problem with battery discharging over a couple of hours. Alternator getting hot while running very quickly.

This may be related to a voltage regulator malfunction (https://www.yourmechanic.com/services/instrument-voltage-regulator-replacement). This is the resister on the passenger fender well that you are referring to. This is a device that monitors the charging system to be sure the battery is charged...

When I shift from drive to reverse or vice versa it makes a clunking noise. 1997 Land Rover Discovery

Hi there - the clunking noise you hear from shifting forward-to-reverse (or vv), is the result of a small amount of wear and loose motion in the driveline. This could be a worn u-joint (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-universal-joint-u-joint), differential gears, or splined coupling...

Car won't start, can hear fuel pump humming so I tried starting fluid in air intake and it ran for few seconds..this is second tim

You should have the computer tested to see if you have cam or crank sensor codes. You may not be getting the injectors turning on due to the camshaft sensor or a weak spark from coils. After computer test then...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com