BMW Z4 Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(151)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(151)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a BMW Z4 Power Steering Pressure Hose Replacement is $475 with $321 for parts and $154 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2007 BMW Z4L6-3.0LService typePower Steering Pressure Hose ReplacementEstimate$907.74Shop/Dealer Price$1098.98 - $1657.11
2013 BMW Z4L6-3.0L TurboService typePower Steering Pressure Hose ReplacementEstimate$2610.78Shop/Dealer Price$2923.93 - $3789.74
2016 BMW Z4L6-3.0L TurboService typePower Steering Pressure Hose ReplacementEstimate$2610.78Shop/Dealer Price$2924.38 - $3790.53
2009 BMW Z4L6-3.0LService typePower Steering Pressure Hose ReplacementEstimate$1118.96Shop/Dealer Price$1325.55 - $1929.25
2004 BMW Z4L6-2.5LService typePower Steering Pressure Hose ReplacementEstimate$925.87Shop/Dealer Price$1117.47 - $1675.21
2006 BMW Z4L6-3.2LService typePower Steering Pressure Hose ReplacementEstimate$802.09Shop/Dealer Price$966.31 - $1450.32
2013 BMW Z4L4-2.0L TurboService typePower Steering Pressure Hose ReplacementEstimate$2255.90Shop/Dealer Price$2481.04 - $3081.22
2005 BMW Z4L6-2.5LService typePower Steering Pressure Hose ReplacementEstimate$925.87Shop/Dealer Price$1114.11 - $1669.34
Show example BMW Z4 Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert BMW mechanics

Real customer reviews from BMW owners like you.

Excellent Rating

(151)

Rating Summary
135
6
3
3
4
135
6
3
3
4

Alex

24 years of experience
464 reviews
Alex
24 years of experience
BMW Z4 L6-3.0L - Battery - Little Elm, Texas
ALex was very knowledgeable, and polite during service call. Excellent service provided and would request him as preferred mechanic.

Kevin

25 years of experience
651 reviews
Kevin
25 years of experience
BMW Z4 L6-2.5L - Car is not starting - Roswell, Georgia
Kevin exuded experience and efficiency in diagnosing the not-starting problem on my BMW. After running diagnostics on his computer he zeroed in on the starter, which turned out to be “dead”.

Kevin

25 years of experience
651 reviews
Kevin
25 years of experience
BMW Z4 L6-2.5L - Starter - Roswell, Georgia
Kevin is a true pro - he replaced my starter in less than 30mins. He had the special tools that are required to work in tight places to remove the starter and the expertise to get the job done with confidence. I recommend Kevin for your BMW repair job and would seek him out again in the future.

H

27 years of experience
828 reviews
H
27 years of experience
BMW Z4 L6-3.0L - Oil Change - Menlo Park, California
Amazing, honest and detailed. He is the only person I will book when I have a need again.

Excellent Rating

(151)

Rating Summary
135
6
3
3
4
135
6
3
3
4
Number of BMW Z4 services completed
1661+
services done by our mechanics
TOTAL NUMBER OF EXPERT BMW MECHANICS
1200+
experts on our platform

Recent articles & questions

P2302 OBD-II Trouble Code: Ignition Coil "A" Secondary Circuit
P2302 trouble code code definition P2302 is a general OBD2 diagnostic trouble code indicating a fault within the ignition coil A secondary...
Is it Safe to Drive With a Misfiring Cylinder?
An engine misfire can be caused by bad spark plugs or imbalanced air/fuel mixture. Driving with a misfire isn't safe and can damage your engine.
7 Tips for Planning the Great American Road Trip
The The great American road trip (https://www.yourmechanic.com/article/5-essential-things-to-know-about-road-trips) has been glamorized on film and in music for decades. Each year tens of millions of Americans hit the roads headed to parts of the country that they previously haven't experienced. If you’re...

Speedometer is erratic and the S light is on

There are a few different components that can cause these issues. The main one is the vehicle speed sensor (VSS) (https://www.yourmechanic.com/services/speed-sensor-replacement). This is located on your transmission, and communicates to the engine what speed the transmission is receiving. The VSS...

What are the best brake pads to get for my volvo c70? I am in rushhour traffic and I travel to the beach.

The best brake pads and rotors for your car are those supplied by Volvo. Nowadays, those parts can be obtained from legitimate Internet Volvo dealers at a discount off of what you would pay at a local Volvo dealer. If...

My truck acts like it wants to stall when in drive but not when accelerating

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com