BMW Alpina B8 Gran Coupe Engine is sputtering Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(6,828)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(6,828)

Engine is sputtering Inspection Service

How much does a Engine is sputtering Inspection cost?

On average, the cost for a BMW Alpina B8 Gran Coupe Engine is sputtering Inspection is $105 with $0 for parts and $105 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2022 BMW Alpina B8 Gran CoupeV8-4.4L TurboService typeEngine is sputtering InspectionEstimate$124.99Shop/Dealer Price$133.39 - $139.69
Show example BMW Alpina B8 Gran Coupe Engine is sputtering Inspection prices

In almost all cases, a sputtering engine is trying to tell you that there is a deeper problem that requires immediate attention. An engine running out of gas will definitely sputter but if the gas gauge indicates full, the problem lies deeper inside the engine compartment.

An incomplete combustion in the engine will cause a sputter as can the ignition system. The fuel system, such as a blocked fuel injector may also cause the vehicle to sputter. While a sputtering engine may not seem like a major issue, it is a symptom of a bigger problem that will not self-correct and will eventually result in a much more expensive repair. The source of the sputter should be investigated and repaired as soon as possible.

How this system works:

A sputtering engine can have its root cause located in a number of different systems. Here are two of the more common ones, the exhaust and fuel system.

The exhaust system collects exhaust gases from the cylinder head via the exhaust manifold, which acts as a funnel diverting exhaust gases away from the cylinders. The gases are then released through the front pipe where they travel to the catalytic converter. The catalytic converter removes the harmful elements of the gases such as carbon monoxide and hydrogen monoxide, converting them into inert gases.

The gases exit the catalytic converter into the muffler, which reduces the noise levels of the engine, and finally the exhaust fumes exit the vehicle at the tail pipe.

The fuel system is responsible for storing and supplying fuel to the car to drive the engine. Fuel is mixed with air, atomized and vaporized. This happens in the engine intake system. This mixture is then compressed in the engine cylinder and then ignited which produces the energy which moves the pistons.

Common reasons for this to happen:

  • Leak in Exhaust Manifold: A leak in the exhaust manifold, which collects exhaust gases, can cause the engine to sputter or run unevenly. This condition can also cause the Check Engine light to trigger as well as present increased engine noise and poor performance from the engine. A cracked or leaking exhaust manifold can create dangerous driving condition as the escaping hot gases can melt nearby plastic components. It can also lead to exhaust fumes making their way into the car cabin.

  • Worn Seals or Gaskets: There are a number of gaskets and seals in the exhaust system and if any of them are failing it can create a rough or sputtering engine. Gaskets and seals wear down over time and will eventually have to be replaced. Failing to do this in a timely manner can damage the exhaust manifold which is a much more expensive repair.

  • Failing Catalytic Converter: If the engine is sputtering, running rough and has a smell of rotten eggs it is probably due to a failing catalytic converter. In most cases, the Check Engine light will trigger as well. When a converter starts to fail, it isn’t able to burn off the hydrocarbons in the exhaust, and is no longer breaking down the sulfur created by the engine. This leads to the strong rotten egg smell. Eventually the car will not start at all as the catalytic converter becomes totally blocked.

  • Malfunctioning Oxygen Sensors: Oxygen sensors measure how rich or lean the exhaust gases are when they leave the vehicles combustion chamber. The vehicle computer uses this information to adjust the amount of fuel entering the engine. A dirty or failing sensor puts too much or too little fuel into the engine causing it to run rough or sputter. Oxygen sensors must be replaced on a regular basis.

  • Dirty Fuel Injectors: Fuel injectors spray fuel into the cylinders. It is then mixed with air and ignited. Fuel injector nozzles can become clogged over time, which can lead to a sputtering engine, slow acceleration and the car not having enough power. Fuel injectors can be cleaned if the problem is caught early, but as the conditions worsens, the injectors may have to be replaced.

  • Bad or Dirty Spark Plugs: Spark plugs are responsible for igniting the fuel in the combustion chamber. If they are not working correctly or are dirty they don’t ignite the fuel cleanly and the car can misfire or sputter. The plugs will need to be replaced or cleaned.

  • Dirty Mass Airflow Sensor: The mass airflow sensor measures the amount of air that is entering the fuel injection system. It sends that information to the vehicle computer, which then delivers the proper amount of fuel to the combustion chamber. A dirty mass airflow sensor will send the wrong information the computer resulting in a rough running or sputtering engine.

  • Vacuum Leak: A leak in the vacuum system can lead to a sputtering or rough running engine. As the problem progresses the vehicle can hesitate or stall when accelerating.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the source and cause of the engine is sputtering issue, ​and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

A mechanic will inspect your car's exhaust system and other important components of your vehicle. This includes the exhaust manifold, exhaust seals and gaskets, oxygen sensors, airflow sensors and more. It may be necessary for the mechanic to crank up your car to diagnose your engine's sputtering.

How important is this service?

In almost all cases, a sputter engine is a symptom of a more serious issue lurking below the surface. If the problem is not diagnosed and repaired in a timely manner the vehicle will likely start to stall, become hard to start and eventually stop running altogether.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert BMW mechanics

Real customer reviews from BMW owners like you.

Excellent Rating

(6,828)

Rating Summary
6,369
206
60
45
148
6,369
206
60
45
148

John

20 years of experience
590 reviews
John
20 years of experience
BMW 325i L6-2.5L - Engine is sputtering - Orlando, Florida
There is a reason that I request John over and over again. He’s honest, no bs, and builds a relationship with his customers. I will keep requesting him every time no matter if it requires a wait of a few days out. I like jobs that are done right the first time

Kyle

22 years of experience
55 reviews
Kyle
22 years of experience
BMW 540i V8-4.4L - Engine is sputtering - Suwanee, Georgia
A pleasure to work with...

Jose

15 years of experience
249 reviews
Jose
15 years of experience
BMW X5 L6-3.0L - Brake Pads Replacement (Front, Rear) - Tampa, Florida
Jose was prompt, courteous, and did a great job on the repairs. Loved the fact that he also let me know of any other issues with the vehicle.

Jeffrey

27 years of experience
870 reviews
Jeffrey
27 years of experience
BMW 328i L6-3.0L - Oil Change - Fort Mill, South Carolina
I can always count on Jeffery to do a great job with servicing my car. He take the time to ensure that he addresses any issues I may be having.

Excellent Rating

(6,828)

Rating Summary
6,369
206
60
45
148
6,369
206
60
45
148
Number of BMW services completed
75108+
services done by our mechanics
TOTAL NUMBER OF EXPERT BMW MECHANICS
1100+
experts on our platform

Recent articles & questions

How to Use Autostick
Autostick gives drivers with automatic transmissions the feel of a manual car. It allows the driver to upshift and downshift for extra control.
P0960 OBD-II Trouble Code: Pressure Control Solenoid A Control Circuit/Open
P0960 P0960 code definition The P0960 code is a generic powertrain code related to the transmission, including pressure faults and sensor failures. In this case, the engine control module (ECM) has received a signal noting that the pressure control solenoid...
Understanding Rental Car Insurance
Consider the 4 types of rental car insurance you can purchase at the counter to ensure you don’t pay hefty prices out of pocket for damages.

I have OBD codes P0025 and P0015

Hi, thanks for writing in. I'd be happy to provide you some insight on these trouble codes. Code P0025 (https://www.yourmechanic.com/article/p0025-obd-ii-trouble-code-camshaft-position-b-timing-over-retarded-bank-2-by-jay-safford) relates to the camshaft position sensor detecting that exhaust camshaft is in an incorrect position. This affects ignition timing which...

the timing chain is making noise at startup what needs to be replaced to fix the problem?

There are many reports about this issue with your truck. I have access to IATN (International Automotive Technicians Network) and the consensus is everything on the front of the motor needs to be replaced. Which is a very, very large...

There was no oil in the car and it started ticking car was acting like it didn't want to start but did at first put oil in the car

The ticking noise may be from the valve train. Whenever there is inadequate oil in an engine, the valve train may run dry and that will cause noise. If damage occurs due to that lack of oil, the noise could...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com