BMW 740i xDrive Water Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(101)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(101)

Water Pump Replacement Service

How much does a Water Pump Replacement cost?

On average, the cost for a BMW 740i xDrive Water Pump Replacement is $778 with $358 for parts and $420 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2018 BMW 740i xDriveL6-3.0L TurboService typeWater Pump ReplacementEstimate$1181.94Shop/Dealer Price$1371.98 - $1917.78
Show example BMW 740i xDrive Water Pump Replacement prices

What is a water pump and how does it work?

The water pump is a belt or chain-driven engine accessory bolted to the engine above the crankshaft pulley. The pump housing has an impeller that circulates engine coolant through the cooling system passageways in the engine block and cylinder head, on to the radiator, where the coolant temperature is reduced. . The lower temperature coolant then flows back to the water inlet on the engine and the water pump continues the cycle.

When to consider replacing the water pump:

  • Coolant leaks or overheating. The water pump impeller shaft is supported by a bearing. Eventually, the bearing or seal can wear and leak or damage the impeller. Many water pumps have weep holes near the pump bearing. If you see significant leakage from that weep hole, it is time to replace the pump.
  • Bearing roughness or noise. If the water pump shaft does not turn smoothly or the pump is noisy, the bearing is excessively worn. Pump replacement will be necessary.
  • Timing belt replacement. In engines where the water pump is driven by the timing belt, it is a good idea to replace the water pump at the same time the timing belt is replaced. The extensive work explains why it is always recommended to replace the water pump whenever the mechanic already has these components removed for regularly scheduled timing belt replacement.

How do mechanics replace the water pump?

  • The water pump is usually bolted to the front of the engine. The replacement procedure will vary depending on whether the pump is driven by the timing belt, the serpentine belt, or chain.
  • On a cold engine, the engine coolant is drained to a level below the water pump.
  • Components that require removing to access the water pump are removed, including the belt or chain that directly drive the pump.
  • The bolts holding the pump to the engine are removed and the pump is pulled out.
  • The gasket surface must be cleaned and the pump mounting surface inspected. A new gasket, rubber seal, or RTV sealant, as required, is installed and then the new pump. The bolts are torqued in sequence using a calibrated inch pound torque wrench.
  • For applications where the water pump is driven by the timing belt, the timing belt must be removed. Typically, this requires removal of the crankshaft pulley, timing belt covers, and timing belt tensioner. Once the new pump is installed, new coolant is added back while bleeding the cooling system of any air. The engine is then run and brought to normal operating temperature to check for leaks and ensure normal operating temperature.

Is it safe to drive with a water pump problem?

No. Should the water pump only leak a little bit, you can drive the car. However, a small leak could suddenly enlarge or the pump bearing might unexpectedly seize. Either circumstance would likely cause engine overheating. If a defective water pump causes the overheating, it is not safe to drive because of the damage to the engine.

When replacing the water pump keep in mind:

  • It is best to install a new cooling system thermostat when you install a new water pump, especially if the thermostat is old or original.
  • Completely flushing the cooling system is a good idea when you replace the water pump. Flushing can be done before or after pump replacement.
  • The rest of the cooling system should be inspected too — particularly rubber hoses, which have a limited lifetime.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert BMW mechanics

Real customer reviews from BMW owners like you.

Excellent Rating

(101)

Rating Summary
95
3
1
1
1
95
3
1
1
1

Attila

20 years of experience
1104 reviews
Attila
20 years of experience
BMW 740i xDrive L6-3.0L Turbo - Pre-purchase Car Inspection - Teterboro, New Jersey
Over the top helpful. I am so happy with Attila!!!! He spoke to me and gave me what I needed to know to make an informed purchase. Thank you sooo much!

Brian

24 years of experience
818 reviews
Brian
24 years of experience
BMW 535i L6-3.0L Turbo - Water Pump - Orange Park, Florida
Arrived on time and performed the install perfectly. I'll use Brian or Joel again !

Peter

44 years of experience
1397 reviews
Peter
44 years of experience
BMW 750Li V8-4.8L - Water Pump - Glendale, Arizona
Pete was on time, enjoyable to communicate with, and obviously knows his profession!

Angel

6 years of experience
237 reviews
Angel
6 years of experience
BMW X5 L6-3.0L - Water Pump - Upper Marlboro, Maryland
Arrived early, was very knowledgeable and helpful. Great service all around. Will for sure look to book Angel whenever a service is needed for my cars.

Excellent Rating

(101)

Rating Summary
95
3
1
1
1
95
3
1
1
1
Number of BMW Water Pump Replacement services completed
1111+
services done by our mechanics
TOTAL NUMBER OF EXPERT BMW MECHANICS
1200+
experts on our platform

Recent articles & questions

P0648 OBD-II Trouble Code: Immobilizer Lamp Control Circuit
P0648 code means an abnormal reading in the immobilizer lamp control circuit has been detected due to a defective bulb, circuit, or faulty wiring.
P0204 OBD-II Trouble Code: Injector Circuit Malfunction - Cylinder 4
P0204 code definition Injector Circuit Malfunction - Cylinder 4 What the P0204 code means The Engine Control Module (ECM) runs checks on...
How Do Heated Windows Work?
The The outside of your car’s windows are subject to harsh environmental elements including: Stone chips Road debris Dirt Bird droppings Snow and ice The benefits of heated windows While you can’t prevent environmental elements from occurring, snow and ice...

How do I fold down the rear seats?

The rear seats can be folded down to create extra storage space in the rear of the vehicle. Folding the rear seats takes a few steps, but is easy: 1. Latch the center seat belt into the side of the...

Possible clogged fuel filter

Hi there. While not common, clogged fuel filter can keep a vehicle from starting. For this to happen, the filter needs to be very clogged. If the filter is that clogged, the fuel pump is forced to work overtime to...

Inside door handle not working

With the inside door handle not working, the most likely cause is the linkage that runs between the door lock actuator and door handle. A qualified technician, like one from YourMechanic, will be able to diagnose your door problem and...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com