BMW 740i xDrive Engine oil is black and gritty Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(6,758)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(6,758)

Engine oil is black and gritty Inspection Service

How much does a Engine oil is black and gritty Inspection cost?

On average, the cost for a BMW 740i xDrive Engine oil is black and gritty Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2017 BMW 740i xDriveL6-3.0L TurboService typeEngine oil is black and gritty InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2022 BMW 740i xDriveL6-3.0L TurboService typeEngine oil is black and gritty InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2019 BMW 740i xDriveL6-3.0L TurboService typeEngine oil is black and gritty InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2021 BMW 740i xDriveL6-3.0L TurboService typeEngine oil is black and gritty InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2020 BMW 740i xDriveL6-3.0L TurboService typeEngine oil is black and gritty InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2018 BMW 740i xDriveL6-3.0L TurboService typeEngine oil is black and gritty InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
Show example BMW 740i xDrive Engine oil is black and gritty Inspection prices

Car engines need oil to operate smoothly and efficiently. Engine oil helps lubricate the dozens of moving and interacting parts, helps prevent rust and corrosion as well as aiding in removing the heat that an engine generates. Modern oil also helps keep an engine clean by removing sludge and build-up. An engine without oil simply will not function.

Brand new engine oil is a lovely amber color but over time it will turn black and in some cases will get gritty. Fortunately, this is usually not a problem, it is simply a result of the oil doing the job it was designed to do.

How this system works:

The primary function of engine oil is to lubricate the various moving parts of an engine. The constant contact between these moving parts generates both heat and wear and tear. Engine oil keeps friction to a minimum and dissipates the heat.

Engine oil is stored in the oil pan. The pan holds between 4 and 6 quarts of oil. When an engine is started, an oil pump sucks the oil from the pan through the pickup tube. The oil then travels to the oil filter, which removes any dirt and debris that has accumulated in it and then sends the oil into the engine via spurt holes. The oil moves through the engine and eventually makes it way back to the oil pan where the process starts again.

Common reasons for this to happen:

  • Normal Wear and Tear: Regardless of how often oil is changed, eventually it becomes black and slightly gritty. This simply means it is doing its job. Modern detergent engine oils which have detergent additives are designed to disperse the tiny particles or engine sludge and hold them in suspension in the oil so they do not build up on engine parts.

This will make the oil darker in color, and slightly gritty but it’s better for the build up to be trapped in the oil then building up on the vehicles engine parts. Oil can only hold so much sludge and eventually it will need to be replaced.

  • Dirty Oil Filter: An oil filter’s primary function is to filter out contaminants in the oil that it picks up while cycling through the engine. Over time an oil filter will become full and will need to be replaced. If it is unable to filter the oil the contaminants will remain in the oil and possibly damage the engine.

  • Overdue for an Oil Change: Oil needs to be changed on a regular basis. While oil turning black and getting slightly gritty is normal, extremely black oil that develops globs on the dipstick needs to be changed immediately. The interval between oil changes will vary depending on the type of oil being used but it is a good idea to follow the manufacturers recommendations.

While 3,000 miles used to be the recommendation, most modern oils, especially synthetics can go between 7,000-10,000 before an oil change is needed.

  • Oil Light Comes On: In most vehicles, if the Oil Warning light comes on, it is reason for immediate concern. In most cases this will indicate a low oil pressure situation, which could be the result of a failing oil pump or a leak. This can do severe damage to the engine. The vehicle should be inspected and repaired immediately.

  • Oil Level is Dropping: If the vehicle is consistently low on oil or the level is dropping sharply over a short period of time, there is probably an oil leak somewhere in the system. An oil leak can lead to a dangerously low amount of oil in the car and should be repaired immediately.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the source and cause of the Oil is Black and Gritty issue, ​and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic look for normal wear and tear of the engine oil, along with the oil filter, oil level and other indications that will help determine if any problem exists or if additional procedures are required in order to provide you with an accurate diagnosis.

How important is this service?

In most cases black and gritty engine oil is normal. Engine oil should be changed on a regular basis according to the manufacturers recommendations. Going too long between oil changes can affect the performance of the engine and lead to expensive repairs.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert BMW mechanics

Real customer reviews from BMW owners like you.

Excellent Rating

(6,758)

Rating Summary
6,302
206
60
45
145
6,302
206
60
45
145

Attila

19 years of experience
942 reviews
Attila
19 years of experience
BMW 740i xDrive L6-3.0L Turbo - Pre-purchase Car Inspection - Teterboro, New Jersey
Over the top helpful. I am so happy with Attila!!!! He spoke to me and gave me what I needed to know to make an informed purchase. Thank you sooo much!

Rigoberto

11 years of experience
739 reviews
Rigoberto
11 years of experience
BMW 325i L6-2.5L - Strut Assembly Replacement (Front) - Chicago, Illinois
I will never go to another mechanic again! I am so glad someone informed me of this website. He was on time, courteous and explained everything he did and even took pictures.

Derrick

20 years of experience
109 reviews
Derrick
20 years of experience
BMW 328xi L6-3.0L - Brake Pads Replacement (Front) - Brooklyn, New York
Once again a great speedy experienced mechanic thanks, definitely will be requesting you again

Kevin

24 years of experience
546 reviews
Kevin
24 years of experience
BMW 325i L6-3.0L - brake booster vac hose - Atlanta, Georgia
As I have previously indicated, Kevin is the go-to person for older BMWs. Not sure you will find a dealership tech as effective

Excellent Rating

(6,758)

Rating Summary
6,302
206
60
45
145
6,302
206
60
45
145
Number of BMW services completed
74338+
services done by our mechanics
TOTAL NUMBER OF EXPERT BMW MECHANICS
1100+
experts on our platform

Recent articles & questions

Is it Safe to Drive with a Leaking Axle Seal?
An An axle seal is the part of the vehicle that connects the axle to the rear differential, or the transmission. The purpose of the axle seal is to keep transmission fluid from leaking. Depending on the size of the...
P2010 OBD-II Trouble Code: Intake Manifold Runner Control Circuit High Bank 1
P2010 P2010 trouble code definition P2010 is a generic OBD2 trouble code that indicates a fault within the intake manifold runner control circuit. This code is similar to P2005, P2006, P2007, P2008, P2009, P2013 and P2015. What the P2010 code...
P2446 OBD-II Trouble Code: Secondary Air Injection System Pump Stuck on Bank 2
P2446 code means there is an issue with the vehicles pressure sensor circuit/secondary air injection pump often due too water from exhaust leaks.

battery very good but wont start.

When you are having the no crank condition, the system will need to have the starter tested to see if it is getting power from the ignition system to operate it. I have seen the starter not work (https://www.yourmechanic.com/services/starter-replacement) and...

Front coil spring housing corroded and broke away

Hey there, thanks for writing in about your 1997 Mercedes-Benz E300. This is also related to your other question regarding the coil springs. As explained, the perch is a structure that supports the coil springs. Often times, when one or...

My car alarm keeps randomly going off at night or during a storm. I know one of my door sensors is messed up and it thinks it's op

The alarm system cannot be bypassed to disable the alarm. you will need to locate and repair the defective door latch in order to fix the issue. I know this is not what you wanted to hear but the manufacturer...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com