BMW 540i xDrive Car Thermostat Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(122)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(122)

Car Thermostat Replacement Service

How much does a Car Thermostat Replacement cost?

On average, the cost for a BMW 540i xDrive Car Thermostat Replacement is $550 with $354 for parts and $196 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2018 BMW 540i xDriveL6-3.0L TurboService typeCar Thermostat ReplacementEstimate$924.52Shop/Dealer Price$1106.44 - $1640.86
Show example BMW 540i xDrive Car Thermostat Replacement prices

What is an engine cooling system thermostat and how does it work?

The car's engine cooling system thermostat is a small valve within a cooling system passageway that opens and closes in response to the temperature of the circulating engine coolant. When your car is first started and the coolant is cold, the valve in the thermostat will be in the closed position, circulating the coolant flow only within the engine instead of flowing to the radiator, which allows the engine to warm up fast, promoting fuel efficiency, low emissions, and reduced engine deposits. Once the engine coolant reaches the design temperature, usually around 195 degrees, the valve will open and close as you drive in order to maintain a coolant temperature typically between 195 to 225 degrees Fahrenheit.

Thermostat

When to consider replacing the engine cooling system thermostat:

  • Engine overheats. A thermostat with the valve stuck closed is a common cause of engine overheating. However, since there are other causes of overheating, a mechanic will thoroughly inspect the cooling system prior to condemning the thermostat. Since it is usually not known how badly the engine overheated, the mechanic will also try to determine if there is evidence that the cylinder head gasket was blown. If so, it would be repaired prior to replacing the thermostat.
  • Temperature gauge reads too low or too high. Thermostats can get sticky, causing the engine temperature to stray from the optimal range. Your dash-mounted temperature gauge will notify you of this malfunction.
  • Cooling system repairs. All thermostats eventually fail. Therefore, if the cooling system is already open for major repairs, such as water pump or radiator replacement, it is recommended to install a new thermostat simply as insurance against future breakdown.

How do mechanics replace the engine cooling system thermostat?

  • Once the engine is completely cold, the radiator cap is loosened and enough coolant is drained from the radiator so the coolant level is below the thermostat housing.
  • The thermostat housing is removed and the thermostat and gasket are extracted. Note that some cars have more than one cooling system thermostat and both might need replacement.
  • All mounting surfaces on the thermostat housing are cleaned of old gasket material. A new gasket is applied and the thermostat is re-installed in the correct orientation and with the temperature sensing cylinder facing downward towards the engine.
  • The thermostat housing bolts are tightened to original equipment manufacturer (OEM) specifications using a calibrated inch-pound torque wrench.
  • The cooling system is refilled with the appropriate coolant type and the system is fully bled of all air.
  • The car engine is run until the normal operating temperature is reached, and while taking precautions with the hot coolant, the coolant level is rechecked while confirming there is flow through the radiator — either visually or with an infrared temperature gun. This will confirm the thermostat is open. Finally, the engine is checked for leaks.

Is it safe to drive with an engine cooling system thermostat problem?

No. If it has been determined that there is a thermostat problem, it should be repaired right away. Failure to do so can cause substantial and costly damage to the engine.

When replacing the engine cooling system thermostat keep in mind:

  • Engine overheating due to causes other than a faulty thermostat, will themselves damage a thermostat. Therefore, always replace the thermostat if the engine overheats, even if the thermostat was not the initial cause of the overheating.
  • The thermostat should be replaced anytime you have major work done on the coolant system. It is convenient and costs little during such repairs and insurance against future breakdown.
  • OEM thermostats are the best ones to use and you can request your mechanic to install only the OEM thermostat. Dealer supplied, OEM thermostats are sometimes more costly but are generally higher quality and specifically engineered for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert BMW mechanics

Real customer reviews from BMW owners like you.

Excellent Rating

(122)

Rating Summary
119
1
0
0
2
119
1
0
0
2

Lucas

30 years of experience
938 reviews
Lucas
30 years of experience
BMW 540i V8-4.4L - Thermostat - Simi Valley, California
Lucas was very friendly and courteous. He arrived on time and replaced the water pump and the thermostat on my car with great care and attention to detail. He did an outstanding job and took the time to explain everything I needed to know. I'm very pleased with his performance and will definitely be using his services in the future as well as recommending "yourmechanic.com" to my family and friends.

Christopher

16 years of experience
40 reviews
Christopher
16 years of experience
BMW 325xi L6-2.5L - Thermostat - Atlanta, Georgia
Very quick and knowledgeable precise

Peter

44 years of experience
1397 reviews
Peter
44 years of experience
BMW 525i L6-2.5L - Thermostat - Phoenix, Arizona
Peter was great. Friendly and curtious on time and did the work that was needed and even helped me with something else

Dennys

31 years of experience
22 reviews
Dennys
31 years of experience
BMW 540i V8-4.4L - Thermostat - Boca Raton, Florida
Dennys was on time,professional and friendly,gave me some tips for future repairs that my car may need,I would recommend him and I'll certainly use this service again.

Excellent Rating

(122)

Rating Summary
119
1
0
0
2
119
1
0
0
2
Number of BMW Car Thermostat Replacement services completed
1342+
services done by our mechanics
TOTAL NUMBER OF EXPERT BMW MECHANICS
1200+
experts on our platform

Recent articles & questions

P0156 OBD-II Trouble Code: 02 Sensor Circuit Malfunction (Bank 2 Sensor 2)
P0156 P0156 trouble code definition Oxygen Sensor Circuit Malfunction (Bank 2 Sensor 2) What the P0156 code means The purpose of the oxygen sensor is to monitor the amount of oxygen present in the exhaust and relay this information to...
Symptoms of a Bad or Failing Radiator Hose
Common signs include leaking coolant, engine overheating, the Low Coolant Light coming on, and radiator hose damage or collapse.
How to Buy a Good Quality Tie Rod End
Your Your vehicle's steering system is likely made up of a pinion and rack. Within this system are tie rods, which play a role in moving the tires on your car. These tie rods are found on both of the...

Coolant flow control valve and camshaft position

A camshaft position sensor is a sensor that monitors camshaft speed to regulate ignition timing and fuel injection timing. This is a small sensor that is usually easily replaced and fairly inexpensive. The coolant control valve controls the flow of...

My key ignition won't turn.

The issue could be the steering column lock mechanism or the key cylinder, or both. To repair those components, typically there will be partial disassembly of the steering column. That is a sensitive area as the air bag is installed...

Please clarify one part to a 5/2 answer (below). On the ’17-’18 Kia Soul it was okay to screw into the footrest metal under the plastic, but on the ’21 I’m not certain what, if anything, is in that footrest cavity to where drilling 4ea. 1/4-20 screws .38-50” deep into the metal is okay. I appreciate your expertise! Thank you.Hello and welcome to just answer. My name is \*\*\*\*\* \*\*\*\*\* I will assist you today. I am sorry you are having this issue, but hopefully I can help. Yes you can drill the foot rest and screw on a cover on the 2021. It is just plastic and will be fine drilling into it.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com