BMW 528i xDrive Hazard / Turn Signal Flasher Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(63)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(63)

Hazard / Turn Signal Flasher Replacement Service

How much does a Hazard / Turn Signal Flasher Replacement cost?

On average, the cost for a BMW 528i xDrive Hazard / Turn Signal Flasher Replacement is $193 with $98 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2015 BMW 528i xDriveL4-2.0L TurboService typeHazard / Turn Signal Flasher ReplacementEstimate$311.65Shop/Dealer Price$378.32 - $538.94
2014 BMW 528i xDriveL4-2.0L TurboService typeHazard / Turn Signal Flasher ReplacementEstimate$291.65Shop/Dealer Price$358.35 - $518.99
2016 BMW 528i xDriveL4-2.0L TurboService typeHazard / Turn Signal Flasher ReplacementEstimate$291.65Shop/Dealer Price$358.35 - $518.99
2009 BMW 528i xDriveL6-3.0LService typeHazard / Turn Signal Flasher ReplacementEstimate$291.65Shop/Dealer Price$358.31 - $518.92
2012 BMW 528i xDriveL4-2.0L TurboService typeHazard / Turn Signal Flasher ReplacementEstimate$291.65Shop/Dealer Price$358.37 - $519.04
2010 BMW 528i xDriveL6-3.0LService typeHazard / Turn Signal Flasher ReplacementEstimate$291.65Shop/Dealer Price$358.35 - $518.99
2013 BMW 528i xDriveL4-2.0L TurboService typeHazard / Turn Signal Flasher ReplacementEstimate$296.65Shop/Dealer Price$363.11 - $523.57
Show example BMW 528i xDrive Hazard / Turn Signal Flasher Replacement prices

What is the Hazard / Turn Signal Flasher all about?

The hazard / turn signal flasher is a small, electrical device that causes the lights on your vehicle to flash in a rhythmic, steady fashion. It is usually located under the driver’s side of the dash, and is wired in-line with the turn signal lever and hazard switch buttons. When the turn signals or hazard lights are turned on, the circuit’s power is routed through the flasher, which only emits short bursts of power that cause the lights to flash. If the flasher is not working, your hazard or turn signal lights may stay on solid when turned on, not turn on at all, or flash at an undesirable rate.

Keep in mind:

  • Flasher units hardly ever develop problems. Although in older vehicles, the wiring can become compromised.
  • Don’t assume that the problem is with the flasher – it could be something as simple as a blown fuse.
  • Check your bulbs, and replace them if necessary.

How it's done:

  • The vehicle's hood is opened and supported manually
  • The new relays are installed onto a mounting bracket
  • The wiring is connected to the relays and into the vehicle harness
  • The hood manual support is removed
  • The install is verified and the hazard lights are tested for proper operation

Our recommendation:

If your turn signals aren’t working, you will fail a motor vehicle inspection or a roadside check. Examine your fuses to make sure none are discolored – this indicates a blown fuse that could be causing the problem. Check your light bulbs as well. If all are in good working order, then the problem could be the hazard / turn signal flasher, which is part of your car's electrical system. Have one of our expert mechanics inspect and replace the hazard turn signal flasher if required.

What common symptoms indicate you may need to replace the Hazard / Turn Signal Flasher?

  • No turn signals on either side
  • Turn signal on only one side
  • Turn signals light up but don’t flash
  • Turn signal flashes too slow
  • Turn signal flashes too fast
  • Hazard lights don’t work

How important is this service?

Malfunctioning turn signals and hazard lights are critical safety issues. If your turn signals aren’t working, you have no way of communicating your driving intentions to other drivers aside from hand signals. Have one of our expert mechanics check them immediately so that the problem can be diagnosed, and appropriate measures taken, such as replacing your hazard / turn signal flasher.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert BMW mechanics

Real customer reviews from BMW owners like you.

Excellent Rating

(63)

Rating Summary
60
2
0
0
1
60
2
0
0
1

Jay

23 years of experience
166 reviews
Jay
23 years of experience
BMW 528i xDrive L6-3.0L - Starter - Palatine, Illinois
Excellent service

Jonathan

13 years of experience
171 reviews
Jonathan
13 years of experience
BMW 528i xDrive L4-2.0L Turbo - Axle / CV Shaft Assembly Replacement (Driver Side Front) - Canton, Massachusetts
Very helpful

Irven

11 years of experience
60 reviews
Irven
11 years of experience
BMW 528i xDrive L6-3.0L - Car is not starting - Columbia, Maryland
He was knowledgable and helped me out quite a bit.

Derrick

20 years of experience
109 reviews
Derrick
20 years of experience
BMW 528i xDrive L4-2.0L Turbo - Oil Filter Housing Gasket - Bronx, New York
Great!!

Excellent Rating

(63)

Rating Summary
60
2
0
0
1
60
2
0
0
1
Number of BMW 528i xDrive services completed
693+
services done by our mechanics
TOTAL NUMBER OF EXPERT BMW MECHANICS
1100+
experts on our platform

Recent articles & questions

What are the Car Pool Rules in Utah?
Utah Utah may be better known for its landscapes and scenic drives (https://www.yourmechanic.com/article/top-10-scenic-drives-in-utah) than its urban areas, but a large percentage of the state’s residents work in Salt Lake City (or other large cities), and rely on Utah’s major freeways...
How to Glue a Taillight Lens
Cracked or chipped taillights are dangerous and can result in a ticket. Glue the missing piece into the light until you can get it replaced.
P1102 OBD-II Trouble Code: Mass Airflow Sensor in Range But Lower Than Expected
P1102 means the mass airflow sensor is not working properly, likely due to a bad connection in the sensor, an air leak, or a faulty sensor.

There is an inconsistent grinding noise when I press the brake

You may be hearing the normal metallic material in your new pads rubbing on the rotors. The material in some types of brake pads has metallic bits of metal in the brake pad (https://www.yourmechanic.com/services/brake-pads-replacement) when it is made. Sometimes clumps...

Cv joint keeps breaking

Hello, thank you for writing in. The vehicle may be experiencing one of several different issues. The first thing to consider is the quality of the replacement you purchased. Re-manufactured CV joints are not terribly uncommon. When you purchase the...

I had the code po342

You will need to make sure the CMP sensor wires are not out of position and near any high voltage wires or coils. If the problem continues then remove the sensor again and check the reluctor on the cam for...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com